SARITA MONTIEL VOL. III 45 rpm single

  • Carmen Machi, Terele Pavez, Asier Etxeandia (Actors).
Check Stock

Machi Koro 2 or Two Card Board Game Bundle with Mr Dice Drawstring Bag

  • Pandasaurus Machi Koro 2 bundle with Mr Dice drawstring bag.
  • Bag measures at 5 x 7.5 inch for small items only.
Check Stock

Obermeyer Clio Softshell Pants Black 8

  • A stain and water resistant performance soft shell that's perfect for tackling the half pipe or carving through fresh powder..
  • Active fit is an athletic design engineered for full motion..
  • HydroBlock® Classic shell:• Elastine Softshell.• HydroBlock shell with a 8,000mm / 3,000 g/m²/24hr waterproof and breathable rating..
  • Engineered construction using stretch fabric and lining for anatomical shaping Full-Motion™ Fusion fit. YKK® Metal zippers at pockets and hem gussets. High back, fleece-lined waistband. YKK® zip fly with windguard, stormflap, and reinforced metal snap closure. Secure-zip hand pockets and pocket at waistband center back. Heavyweight top-stitching at knee panels. Water-resistant powder cuffs with gripper elastic. Branding on right leg and back left calf. 74% nylon, 26% spandex. Machi.
Check Stock

3030 Series Aluminum Profile Connector Set, 20pcs Corner Bracket, 40pcs M6 T Nuts and M6X10 Hex Screw Bolt for 30S 30x30 Aluminum Extrusion Profiles Rail Accessories

  • 3030 Aluminum Extrusion Aluminum Profiles Brackets Set, 20pcs 3030 Corner Brackets Connector, 40pcs M6 T-Nuts and 40pcs M6 Hex Screw Bolt for T Slot Rail 8mm T/V Slot 30mm Series Aluminum Rail Accessories.
  • 3030 series aluminum extrusion connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • 40pcs M6 t slot nuts and bolts: 40pcs carbon steel galvanized M6 x 10mm t-slot nuts, 40pcs stainless steel M6 x 10mm hex socket cap screw bolt.
  • Aluminum extrusion t bracket used to connect pieces of 30mm aluminum extrusion at a 90 degree angle suitable for most of metric 30 series aluminum profile extrusion.
  • T-slot aluminum extrusion rail M6x10mm drop in T-Nuts, It can be positioned at any position of the profile instead of sliding in at the end, which is more convenient to use.
Check Stock

Pandasaurus Games Machi Koro - Family-Friendly Board Games - Adult Games for Game Night - Card Games for Adults, Teens & Kids (2-4 Players)

  • Pandasaurus Games Machi Koro Is The Perfect Game For Adults, Teens, And Kids, Where You Can Build Your Own City And Collect Money When The Dice Rolls In Your Favor.
  • Global Smash Hit With More Than 1 Million Copies Sold, And Featured In Myriad Publications Including Cosmopolitan, The Guardian And The Chicago Tribune.
  • Brand New Edition With 3D Molded Custom Coins In 3 Sizes And Colors! Also Includes New 20Mm Chunky Dice And Custom Tray For Safe Traveling. New Spot Uv And Gold Foil On Box, And Bright Japanese Artwork Sets It Apart From Other Games On The Shelf.
  • Multi Award-Winning And Nominated For The Spiel Des Jahres—Game Of The Year.
Check Stock

Gizmo Dorks 3D Printer Filament 3mm (2.85mm) 200g, 4 Color Sample Pack - Flexible Red, Polycarbonate Blue, Nylon Clear, PETG Green

  • Bundle contains 4 sample spools each containing 200 grams of different 2.85mm diameter 3D printer filament: Flexible TPU Red, Polycarbonate Blue, Nylon Clear, and PETG Green.
  • Flexible TPU red filament has a shore hardness of 95A and can be used to print different flexible parts such as cellphone cases.
  • Polycarbonate blue 3D filament is extremely hard and durable as polycarbonate is used in many applications such as bullet proof glass.
  • Nylon 3D printing filament is a great engineering filament that has great wear resistance that can make specialty printed parts.
  • PETG filament combines all the benefits of PLA with ABS producing printed parts that are both strong and flexible.
Check Stock

10Sets Black 2020 Series Aluminum Profile Connector Set, 10pcs Corner Bracket, 20pcs T Nuts and Hex Screw Bolt for Slot 6mm 20S Aluminum Rail Accessories

  • Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile, Package content: 10pcs 20mm 90 degree solid cast aluminum corner bracket, 20pcs carbon steel galvanized M5 T-slot nuts, 20pcs black M5x8mm hex socket cap screw bolt..
  • 2020 series aluminum profile connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects..
  • Aluminum corner bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 series aluminum profile extrusion..
  • Carbon steel hex socket button head bolts screws nuts surface chrome finish Anti-corrosion,rustless,non-pollution..
  • T-Slot aluminum extrusion M5x8mm hardware slide in T-Nuts made from high quality carbon steel galvanized..
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black

  • Compatible Models: This Extruder Motor kit is compatible with Creality 3D printers Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/CR-10/CR-10S and etc..
  • All-metal Extruder -- Stronger extrusion force with stable performance.
  • metal extruder with high quality aluminum alloy has stronger extrusion force,....
  • Smoothly and precisely -- The extrusion gear with high density is closely matched with U-shaped bearing. The even extrusion forces avoids the slippage....
  • High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which....
  • Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step..
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

Yamata FY335A 10\ Arm Cylinder Bed Walking Foot Sewing Machine with Servo Motor and Table.Assembly Required.DIY

  • ✅It come complete with sewing machine table, servo motor, everything (drawer, belt, tools, lamp and instruction manual) brand new, packed in sealed boxes and never been used before. Knockdown Table .DIY, professional assembly may required !.
  • ✅Included accessories in the machine 8100e head: : Bobbin Winder Thread Stand-Machine Oil- Instruction Manual -Oil Pan- Knee Lifter.
  • ✅Juki DDL-8100e Single Needle Lockstitch Industrial Sewing Machine ( NOT a walking foot).
  • ✅Up to 4500 stitches per minute Identical to and replaces DDL-8500 models Replaces popular DDL-MS and DDL-888 models, but has more speed Single-needle Lockstitch Maximum foot lift: 13 mm Maximum stitch length: 5 mm Maximum stitches: 6 stitches per inch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
  • by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook Industrial Sewing Machi.
Check Stock

UniTak3D Ender 3 Direct Drive Upgrade Kit Conversion Bracket Compatible with Creality Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer Dual Gear Extruder&Bowden Extruder

  • 【Application】:The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder..
  • 【Outstanding Extrusion Control】:A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result..
  • 【Stable Operation】:The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable..
  • 【Flexible Filament Supported】: Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials..
  • 【Easy Installation】:No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit..
Check Stock

Iverntech MGN12 300mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Package Includes: 22pcs 20mm corner brackets, 44pcs M5x10mm T-slot nuts, 44pcs M5x10mm flanged button head socket cap screws bolts, 50pcs flat washers and 50pcs lock washers..
  • 2020 Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion..
  • The angle bracket is used to reinforce right-angle corner joints of aluminum extrusion profiles, insert the two ends of the bracket into the groove of the profile, and tighten the screw to fix the two profiles..
  • T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel, surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • 304 stainless steel M5x10mm button head socket cap screws features anti-corrosion, rustless, high-hardnes. M5 flat washers and lock washers can be used to adjust the length..
Check Stock