Categories

Best Eye Bolt Threaded Kit

BlueSunshine Front and Back Disk Brake Kit - 160mm For 80cc Gas Motorized Bicycle - Freewheel Threaded Hubs Hole distance of 48mm

  • Complete 26" Mechanical Disk Brake Kit, Front and Back - 160mm rotor diameter..
  • Center 6 bolt pattern diameter on rotor is 48mm..
  • This kit comes with 2 mounting adapter, your hub need to either have the same 6 bolt pattern to mount the rotor directly or you can use the mounting adapter on your threaded hub (1.37 x 24 tpi)..
  • This kit works best with our motorized bicycle frames and KMB frames..
  • Caliper Holders are NOT included but are required..
Check Stock

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes plastic knobs that are constructed from polypropylene plastic with molded-in brass insert that will not strip.
  • Bolts and washers constructed from steel.
  • PACKAGE CONTENTS: Tightening knob kit includes (4) T track knobs (5/16”-18 threaded knobs), (4) bolts, and (4) washers for your convenience.
  • This T bolts and knobs pack is for use with a hold down clamp (sold separately).
Check Stock

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes plastic knobs that are constructed from polypropylene plastic with molded-in brass insert that will not strip.
  • Bolts and washers constructed from steel.
  • PACKAGE CONTENTS: Tightening knob kit includes (4) T track knobs (1/4”-20 threaded knobs), (4) bolts, and (4) washers for your convenience.
  • This T bolts and knobs pack is for use with a hold down clamp (sold separately).
Check Stock

Williams EB-25T 1/2-Inch Shoulder Eyebolt

  • Dimension: This M10 Eye Bolt rod total length 112mm/4.4inches, thread outer diameter is 10mm/0.39inch, thread length 70mm/2.75inches, ring inner diameter 25mm/0.98inch.
  • Ring Bolt Features: The heavy duty eye bolts 2.75" with strong support, the lock nuts providing better security and firm hold, the washers included can prevent loosening.
  • Perfect Kit: These M10 shoulder eye bolts Often used to attach rope or other hardware to a surface or object, suitable for homes, offices and other places, play the role of attachments and suspension.
  • High Quality Material: The stainless shoulder eye bolt is made of high grade 304 stainless steel, The surface of the thread is smooth, the force is even, it is not easy to damage, and it is durable, This stainless eye bolt is made of super large machine, which offers good corrosion resistance in any environment, have superior rust resistance and the excellent of oxidation resistance.
  • Package includes: 2 x shoulder eye bolts, 2 x nuts, 2 x washers, if you are not satisfied with the product, you can always send us an email to us, provide you with satisfactory service in the first time.
Check Stock

Method 401-R Beadlock 15x5 ATV/UTV Wheel - Raw Machined (4/156) 5+0

  • Developed for the serious off-road enthusiast. Solid A356 aluminum with T6 heat treatment construction.
  • Iconic 12 window design with debossed METHOD logos. Reinforced inner lip provides extreme strength and durability. Forged 6061 aluminum V.1 beadlock ring with matte black E-coating.
  • American made Grade 8 zinc-plated beadlock hardware kit included. Redundant sets of threaded beadlock hardware holes machined into wheel.
  • Bolt-on center cap with embossed METHOD logo. Hub centric fitments for common applications.
  • Super strong 3600 lbs. load rating. Custom bolt drilled bolt patterns and hub openings available.
Check Stock

O'SKOOL 5 Star T-Track Knobs Kit 4-Pack with Star Threaded 1/4-20 Knobs, Bolts and Washers

  • INCLUDES: (4 ) Red 5star knobs 1/4”-20 UNC threaded knobs , (4 ) hex head bolts 1/4”UNC X 3 inch,(4 ) washers, (4 ) plastic washers.
  • Red knob kit with an ergonomic design for smooth handling and comfort . Stainless steel hex head bolt has pullout resistance and durability. Washers for your convenience，It is mainly used to reduce pressure and friction..
  • EASY TO USE : Tighten the knob, bolts, and washers arranged together to help secure and enhance your woodworking jig assemblies..
  • HOW TO USE : To use on your T-track, insert the head of a bolt into the track with a washer and align it with the threaded knob.
  • APPLICATION: This is for a retaining clip for use with a T-track slot, fixtures, and splint..
Check Stock

Tactical Bolt Knob for B-14 Rifles

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock

Powerbuilt Harmonic Balancer Puller and Installer Tool Set, Install and Remove Kit, Cars and Light Trucks, Storage Case - 648637

  • Strong and dependable enough to last a lifetime.
  • Kit services: many automobiles and light trucks.
  • Tool set for removal and installation of harmonic balancers that have threaded holes.
  • Removal pieces: combo yoke, national fine center screw, center point piece and bolt pairs.
  • Installation pieces: national fine center screw, thrust bearing, forcing nut and jaw nut.
  • Adapters included: M12-1.5, M14-1.5, M16-2.0, 7/16-Inch-20, 1/2-Inch-20, 9/16-Inch-18 and 3/416.
  • Kit 12 includes 22-Piece for removal and installation of harmonic balancers with threaded holes.
Check Stock

Method Race Wheels 106 Beadlock Method Bronze 17x9" 5x5", 44mm offset 3.5" Backspace, MR10679050944B

  • Developed for the serious off-road enthusiast. Solid A356 aluminum with T6 heat treatment construction.
  • Tough 6 windowed point design with debossed METHOD logos. Reinforced inner lip provides extreme strength and durability.
  • Extra wide bead seat is 17% bigger to accommodate largest tires. Forged 6061 aluminum V.3 beadlock ring is 53% thicker and reduces deflection.
  • Recessed hardware has 360 degree protection to prevent bolt head shearing. American made Grade 8 zinc-plated beadlock hardware kit included. Redundant sets of threaded beadlock hardware holes machined into wheel.
  • Bolt-on center cap with embossed METHOD logo. Hub centric fitments for common applications. Super strong 3600 lbs. load rating. Custom bolt drilled bolt patterns and hub openings available.
Check Stock

Tactical Precision Manufacturing Titanium Bolt Knob 5/16x24 - Dragon Scale - (Long) 1.90

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock

Method Race Wheels 101 Beadlock Raw Machined 17x9" 8x6.5", 12mm offset 4.5" Backspace, MR10179080312B

  • The wheel that defined the Method brand — Lighter. Stronger. Faster..
  • Countless race wins and championship honors across multiple classes.
  • Solid A356 aluminum construction with proprietary heat treatment. Reinforced inner lip provides extreme strength and durability. Strong 1900 lbs. to 3400 lbs. load ratings.
  • Forged 6061 aluminum V.1 beadlock ring. American made Grade 8 zinc-plated beadlock hardware kit included. Redundant sets of threaded beadlock hardware holes machined into wheel.
  • Custom bolt drilled bolt patterns and hub openings available. *Custom bolt patterns and finishes available. Call for more info..
Check Stock

Method Race Wheels 105 Beadlock Matte Black 17x9" 5x5", 38mm offset 3.5" Backspace, MR10579050538B

  • Developed for the serious off-road enthusiast. Solid A356 aluminum with T6 heat treatment construction.
  • Iconic 12 window design with debossed METHOD logos. Reinforced inner lip provides extreme strength and durability. Forged 6061 aluminum V.1 beadlock ring with matte black E-coating.
  • American made Grade 8 zinc-plated beadlock hardware kit included. Redundant sets of threaded beadlock hardware holes machined into wheel.
  • Bolt-on center cap with embossed METHOD logo. Hub centric fitments for common applications.
  • Super strong 3600 lbs. load rating. Custom bolt drilled bolt patterns and hub openings available.
Check Stock

Dye M3+ Paintball Marker - Battleship 2.0

  • FL-21 Bolt - The FL-21 Bolt System with an all-new 2-Stage Flex Face Bolt Tip sets a new standard for dependability and performance. Designed to operate across the widest range of extreme conditions, the FL-21 bolt provides unmatched performance without sacrificing reliability..
  • Flex Face Bolt Tip - The all-new 2-Stage Flex Face Bolt Tip within the FL-21 Bolt System maintains ideal bolt speed throughout the bolt cycle. A slow, soft first stage for optimal paint handling and a second stage with a speed boost to maximize valve lift operation..
  • Quick Release Bolt - The proven Quick Release Bolt Assembly is a robust steel gate system that securely hold the bolt in place. A simple push button system allows the user to remove and re-install the bolt kit in seconds. Standard maintenance has never been easier or more accessible..
  • SLAP ASA Slide Lock AirPort - DYE’s Slide Lock AirPort (SLAP) ASA is all-new for the M3+. The new enclosed SLAP design provides longterm dependability in a rugged and easy-to-operate package. The shielded design has no button to operate, no knob to turn and no lever to get snagged. All critical operations are protected by the Slide Lock Cover. Simply press and slide the lock cover back to engage the air supply with ease..
Check Stock