Categories

Best Ezdiy Fab M Ssd Heatsink 2280

GLOTRENDS M.2 Heatsink with M.2 Thermal Pad for 2280 M.2 PCIe 4.0/3.0 NVMe SSD (2 Packs)

  • 2 packs of M.2 heatsink fits for PS5/PC installation. 0.12inch/3mm high m.2 heatsink well fit for PS5 installation as well as PC M.2 Slot..
  • Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent Rocket 4, Samsung 980 Pro, Samsung 970 Pro, Silicon Power US70, and etc..
  • Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long time high-temperature operation..
  • 5°C- 20°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink can extend the life of M.2 PCIe SSD..
  • A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low viscosity, thermal conductivity, and insulation..
Check Stock

Advancing Gene Nano Silicone Thermal Pad for M.2 2280 NVMe SSD Heatsinks 70x20x1mm 2PCS Pack

  • [Wide Compatibility] - Advancing Gene thermal pad fits for all kinds of M.2 2280 SSD (22 x 80mm) heatsinks, such as EKWB, Sabrent heatsink etc. No....
  • [Nano Grease Material] - Made from high purity Nano Silicon Grease Material, with good thermal conductivity ability..
  • [Soft Enough and Moderate Viscosity] - Soft enough and good ductility, compatible with uneven surface of the M.2 SSD. Moderate viscosity, with no....
  • [Easy for Installation] - Remove the protective films on both sides of the thermal pad and put it under the M.2 SSD Heatsink (No distinction between....
  • [Dimensions and Replacement Frequency] - Item Size: 70 x 20 x 1mm, perfectly fit for M.2 2280 SSD heatsinks, no cutting required. In order to achieve....
Check Stock

EZDIY-FAB NVME M.2 Aluminum Heatsink 12V 4 Pin RGB Cooler for 2280 M2 SSD Heat Sink Tri-Cool with Silicone Thermal Pad

  • Aluminum Alloy Heatsink with the most heat dissipation designed specially for 1x M.2 SSD 2280 DIY Desktop PC SSD.
  • Triangular Aluminum fin design, Double-sided cooling design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer..
  • Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, 980 PRO, etc..
  • Advancing thermal pad is made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD.
  • Sync RGB lighting via motherboard:- ONLY works with an RGB(+12V, 4-pin) capable motherboard or an RGB(+12V, 4-pin) controller(Please check the 12V RGB motherboard of your motherboard before purchase!).
Check Stock

Chenyang Slim Type Mini PCI-E mSATA SSD to 2.5' SATA 3.0 22pin HDD Adapter Hard Disk PCBA

  • ➤ M.2 NVME SSD to PCIe 3.0 x4 channel for Key-M M.2 SSD (form factors 2230, 2242, 2260,2280).
  • ➤ M.2 SATA-based SSD to SATA channel for Key-B/B+M M.2 SSD (form factors 2230, 2242, 2260,2280).
  • ➤ mSATA to SATA channel for 30x50mm mSATA SSD.
  • ➤ With advanced heat sink solution,PCB 24 X 5 copper hole effective ventilation heat dissipation,Including 2 Aluminum Heatsink.
  • ➤ Including both regular size and low-profile slot brackets for flexible system chassis installation. LED power and data transfer status. No driver installation required.
Check Stock

M.2 PS5 SSD NVMe Heatsink for Samsung 980 Pro 970 EVO Plus SN570 SN750 SN850 Firecuda 530 NVME or SATA m2 2280 SSD Cooling Heatsink, Black

  • 【Upgrade Your Computer PS5 with M.2 NVME Heatsink】 Designed for new M.2 M key or B key disks, this M.2 SSD heatsink is perfectly work with M.2 2280 SSD, Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, 980 PRO,WD SN850 SN750 SN570, Firecuda 530, Crucial P2 Crucial P5 Plus, etc. The 2280 M.2 NVMe SSD heatsink helps to cool desktop PCs and PS5, releasing stress on the system so it can operate more efficiently..
  • 【Aluminum Alloy Material】Aluminum alloy groove material can better help enhance the cooling area, the highest efficiency can reach 10°C – 30°C cooling effect, help the system cool down to avoid overheating and throttling, to help you improve the performance of your computer. (Please note that heat dissipation can vary depending on the environment).
  • 【Easy to Install & Operate】Double-sided clips and 6 height adjustable screws. Suitable for M.2 SSDs with a minimum height of 12mm, easy and convenient to install and better protect your M.2 SSD during disassembly and installation..
  • 【Three Nano Thermal Pads】Advancing Gene thermal pad is made of a unique nano-silicone material, which makes it better in thermal conductivity. The thermal conductive pad is soft enough and well ductile to be compatible with both uneven....
Check Stock

EZDIY-FAB 5V ARGB SATA NVMe NGFF M.2 Heatsink SSD Cooler for 2280 M.2 SSD, with Thermal Pad (SSD not Included)

  • Aluminum alloy, anodic oxidation surface treatment increases M.2 SSD cooling area.
  • Groove design, greatly increase the heat dissipation area, with 5°C - 20°C cooling effect (Varies depending on the environments), cool your M.2 2280 SSD to a safe temp to avoid overheating and throttling, improve your computer's performance..
  • Three steps buckle supports M.2 SSD in various thickness. (SSD not included).
  • M.2 SSD RGB heatsink compatible with desktop computers. Fit for M.2 2280 SSD (22 x 80mm), such as 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc..
  • Equipped with 5V ARGB LED lights, you can control and change the colors by connecting to M/B or by other RGB controller. High density LED. Easy cable routing.
Check Stock

EKWB EK-M.2 NVMe Heatsink- Black

  • Materials used: – Aluminium front cover – Aluminium backplate – Stainless steel clips.
  • Enclosed: – EK-M.2 NVMe Heatsink front cover – black – EK-M.2 NVMe Heatsink backplate – black – Mounting clips – Thermal pad 0.5mm – Thermal pad 1mm – Thermal pads.
  • PLEASE NOTE: The heatsink is compatible with all single sided type 2280 M.2 NVMe SSDs (22mm wide, 80mm long). The heatsink is compatible with M.2 (NGFF) connectors 4.2mm heigh.
  • PLEASE NOTE: Its mandatory to mount thermal pads on both sides of the M.2 NVMe SSD. The ASUS HYPER M.2 PCIe card just for showcase it is not included!.
Check Stock

NewHail 5V M.2 2280 SSD Heatsink with 40mm PWM Cooling Fan + 3X 4.5mm Heat Pipe SSD Cooler for M.2 2280 NVMe & SATA SSD Only Thermal Pad Included 5V Fan

  • 5V M.2 Heatsink combines active and passive cooling, temperature is reduced and ensures long-lasting performance.
  • Compatibility Note---This is a 5V fan and Not the typical 12V that basically all motherboards use.
  • Compatible with both single-sided and double-sided....
  • 3 x 4.5mm Copper Heat Pipe---3 x 4.5mm Copper Heat Pipe, the heat produced by M.2 2280 SSD will be absorbed by the heat pipe and effectively conducted....
  • Larger 40MM PWM Cooling Fan---With Larger 40MM Quiet PWM Cooling Fan (9 blades powerful fan,5V / 8500rpm).Low noise level at max rate 8600RPM rapidly....
  • Package List---1x NewHail 5V M.2 SSD Cooler for M.2 2280 NVMe & SATA SSD (Note: M.2 2280 SSD is Not Included!).
Check Stock

ineo Aluminum M.2 2280 SSD Heatsinks with 20mm Fan and Pure Cooper Strip for M.2 NVME SSD [C2600 Fan]

  • 20x20 FAN: 10000 rpm high-perfermance fan, low noise and no vibration, with 8°C - 25°C cooling effect (Varies depending on the environments), very suitable for game players..
  • Compatible with PCIe NGFF NVMe M.2 SSD Size.
  • 8 x 0.8mm small square): Unique Nano silicone thermal pad. Soft and good ductility, compatible with uneven surfaces.
  • Low viscosity, no damage to the M.2 SSD warranty label..
  • Heatsink Design: Groove design, greatly increase the heat dissipation area. Aluminum alloy material, silver plating, anodic oxidation surface treatment. M.2 SSD Heatsink size: 0.94 x 2.95 x 0.24in. (24 x 75 x 6mm), net weight: 0.78oz / 22g. Thermal conductivity of the heatsink: 560W/mK, minimum installation height requirement: 10mm, ONLY FIT FOR DESKTOP.
Check Stock

Deal4GO M.2 2280 SSD Heatsink Thermal Shield 26X1Y 026X1Y w/Support Bracket X8MY9 0X8MY9 for Dell G15 5510 5511 5515 5520 5521 5525

  • Compatible with Dell G15 5510, G15 5511, G15 5515, G15 5520, G15 5521, G15 5525 gaming laptop series..
  • ONLY supports with 2280 solid-state drives..
  • Help you add a 2280 NVMe SSD to your Laptops with Slot 2 or Slot 1..
  • Heatsink Part Number(s): 26X1Y, 026X1Y, CN-CN026X1Y, ET36L000210. Support Bracket Part Number(s): X8MY9, 0X8MY9, CN-0X8MY9..
  • Each Pack come with 1x M.2 2280 SSD Heatsink Thermal, 1x M.2 Support Bracket, 3x Screws..
Check Stock

3 in 1 M.2 and mSATA SSD Adapter Card for M.2 NVME to PCIE Adapter,M.2 SATA SSD to SATA III Adapter,mSATA to SATA Adapter (with 2 Aluminum Heatsink)

  • ➤ M.2 NVME SSD to PCIe 3.0 x4 channel for Key-M M.2 SSD (form factors 2230, 2242, 2260,2280).
  • ➤ M.2 SATA-based SSD to SATA channel for Key-B/B+M M.2 SSD (form factors 2230, 2242, 2260,2280).
  • ➤ mSATA to SATA channel for 30x50mm mSATA SSD.
  • ➤ With advanced heat sink solution,PCB 24 X 5 copper hole effective ventilation heat dissipation,Including 2 Aluminum Heatsink.
  • ➤ Including both regular size and low-profile slot brackets for flexible system chassis installation. LED power and data transfer status. No driver installation required.
Check Stock

M.2 NVME to PCIe 3.0 x4 Adapter with Aluminum Heatsink Solution

  • ➤ M.2 NVME（M Key） SSD to PCIe expansion card.
  • ➤ Equipped with Aluminum heatsink can reach 5-20 degrees celsius cooling effect.
  • ➤ Supports 2280/2260/2242/2230mm M.2 SSD.
  • ➤ PCIe4.0 x4 support PCIe x4 / x8 / x16 slot.
  • ➤Supports NVMe SSD, such as Samsung 950Pro/960EVO/XP941/PM951/PM961/SM951/SM961, Plextor M6e Series, Kingston HyperX Predator M.2 SSD and so on..
Check Stock

Bejavr M.2 NVME to PCIe 3.0/4.0 x4 Adapter, NVME/AHCI SSD to PCIe Expansion Card with Aluminum Heatsink Solution, Supports PCI-Express X4 X8 X16 Slots

  • NVMe PCIe Adapter Apply to 2280/2260/2242/2230mm M.2 NVMe and AHCI SSD, Adapter with Aluminum Heatsink Solution..
  • M.2 PCIe Adapter Supports PCI-Express X4, X8, X16 slots. PCIe 4.0 lanes with up to 64Gbps bandwidth, backward compatible with PCIe 1.0 2.0 3.0, Full release the speed of PCIE 3.0/4.0 X4 Full Speed M.2 PCIe SSD, such as 64Gbps M.2 PCIe 4.0 SSD..
  • PCIe NVMe Adapter Supports Windows 11/10/8、Windows Server 2012 R2、Linux、Fedora、SUSE、Ubuntu、Red Hat（no driver required） NOTE: Go to NVMe SSD manufacture website for driver installation if your PC can not recognize NVMe SSD. Win7 and Windows Server 2008 R2 need additional driver for NVMe SSD..
  • PCIe NVMe 3.0/4.0 x4 Adapter with 2 thermal pads, You put one between the ssd and the carrier and one between the ssd and the heat sink..
  • Package Including: ➤1-M.2 PCIe Adapter x1.➤2-SSD Spare bolt（Pre-installed on PCB）.➤3-Low Profile Bracket x1.➤4-Screw Driver x1.➤5-Regular Profile Bracket x1.➤6-Heat conducting silica gel pad x2 （thick + thin）.➤7-Aluminum Heatsink x1.➤8-Heatsink fixing spring nails x2.➤9-PCB fixing screws x2.➤10-Bracket fixing screws x1..
Check Stock