Categories

Best Fabricated Aluminum Product

WEIAND FABRICATED OIL PAN KIT,7 QUARTS,GOLD ZINC FINISH,9" DEPTH,REAR SUMP,DRAG RACING,COMPATIBLE WITH 1979-1993 FORD MUSTANG 351W CONVERSION

  • Brand New Weiand Fabricated Oil Pan Kit, 7 Quarts, Gold Zinc Finish, 9" Depth, Drag Racing, Rear Sump Location, Compatible with 1979-1993 Ford Mustang 351W Conversion (Part #5039WND).
  • Weiand continues to expand oil pan kit offerings! You remember the old days, when gassers ruled the strip in the 1950s, 1960s, and early 1970s. They were nose up with speed parts easily seen underneath. Weiand aluminum oil pans helped them get down the strip with 7-quart oil capacity and fins to keep them cool!.
  • Times and styles have changed, but Weiand is back and proud to announce their latest release of fabricated oil pan kits for Big Block Chevy, GM LS-engines, Small Block Ford & Mopar B/RB engine applications!.
  • Features: Oil Pan Kit comes complete with the following: application specific oil pan, oil pan gasket, oil pump pickup and pan mounting bolt kit | Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high perfomance engine oil systems fed properly | Gold Zinc Finish | Popular applications for drag race applications.
Check Stock

A-Team Performance - EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short - Compatible with GM Chevrolet LS3 L92 SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Silver

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

A-Team Performance - EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short - Compatible with GM Chevrolet LS3 L92 SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Black

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short Black.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA) Rectangle Port Intake only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

General Tools Utility Automatic Center Punch #70079 - Nail Punch Tool to Mark and Scribe - Machinist Tools

  • LIGHTWEIGHT ALUMINUM BODY: This pre-drilling leather punch tool can scribe, stake, and prepare nail or screw holes. It's easy to use, and the....
  • HARDENED STEEL POINT: Fabricated from durable aluminum alloy, our convenient metal punch tool has a conical-shaped steel tip that allows you to safely....
  • ONE-HANDED SPRING IMPACT: Ideal for metal workers, machinists, automotive repair professionals, and DIYers, this spring-loaded center punch has an....
  • KNURLED FINGER GRIP: Allows a sturdy grip, easy handling, and less slippage, avoiding potential injury. Add this product to your mechanic accessories,....
  • GENERAL TOOLS: We have been a recognized leader in the innovation, design, and development of specialized precision tools for many years. We encourage....
Check Stock

Janco GREENHOUSES Palmetto' - 8' x 10' Aluminum & Glass Greenhouse Kit

  • Pre-Fabricated Aluminum & Glass Greenhouse Kit. This is the perfect start for the Hobby Gardener who is ready to step up to the benefits of a Glass and Aluminum Greenhouse.
  • Heavy Gauge Extruded Aluminum Construction (90mph Wind Load, 25lb Snow Load). This Greenhouse is guaranteed to LAST, approved by Structural Engineers across the Country..
  • Build your Greenhouse for the Future Now!.
Check Stock

HENCKELS Classic Razor-Sharp 8-inch Chef's Knife, German Engineered Informed by 100+ Years of Mastery & Classic Razor-Sharp 4-inch Paring Knife, German Engineered Informed by 100+ Years of Mastery

  • Product 1: Fabricated from high quality German stainless steel. Handle length - 4.72 inch.
  • Product 1: Fully forged construction offers durability and a seamless transition from blade to handle.
  • Product 1: Professional, satin finished blade boasts Precision cutting and is finely honed for long lasting sharpness.
  • Product 2: Fabricated from high quality German stainless steel.
  • Product 2: Fully forged construction offers durability and a seamless transition from blade to handle.
  • Product 2: Professional, satin finished blade boasts precision cutting and is finely honed for long lasting sharpness.
Check Stock

Dorman 902-5135 Engine Coolant Thermostat Housing Assembly Compatible with Select BMW Models

  • Direct bolt-in replacement to stock, cracked or discolored tanks Fabricated Aluminum for strength, factory tanks fail after repeated high heat situations No cutting of factory hoses is required and accepts the factory clip-on hose Included is a Moroso Part No. 63324 racing radiator cap that operates in the same pressure range as the factory cap The Moroso radiator cap mounts to a billet aluminum neck that will not strip out like plastic threaded necks Easy to read slight level is included This Aluminum tank can be polished, chromed, painted, powder coated or left as is for a race look..
Check Stock

Dual Handle Hand Truck (1)

  • RUGGED CONSTRUCTION: Avoid physical strains and injuries with our sturdy hand truck dolly. It has a load capacity of 500 pounds, so you'll be able to move furniture, gardening supplies, large boxes, and heavy objects..
  • LIGHTWEIGHT: Fabricated from durable industrial-grade aluminum, this dolly for moving is rust and corrosion-resistant. It's easy to lift, weighing only 20 pounds, and its high-tech wheels help reduce friction and support the load..
  • GET AROUND OBSTACLES: Comes equipped with rubberized comfort handles and low-friction skid bars allowing you to easily and safely pull the hand truck over stairs and curbs. It has 8" wheels and measures 54" H x 18.5" W with a 17.5 x 9" nose plate..
  • MULTIFUNCTIONAL: Ideal for commercial product distribution and delivery. Use our moving dolly for beverage delivery, corporate offices, food service, hospitals, malls, manufacturing, package delivery, or any heavy maneuvering..
  • HAULPRO: We are a family-owned and operated company that offers high-quality hand trucks, dollies, and commercial material handling equipment. We provide impeccable customer service and always strive to meet the highest standards..
Check Stock

A-Team Performance - Tall Fabricated Aluminum Valve Covers - Compatible with Big Block BBC Chevy 396 402 427 454 Polished

  • Tall Fabricated Aluminum Valve Covers, Polished.
  • Compatible With 1966-2000 Big Block Chevy's 6.5 L / 396 in 6.6 L / 402 in 7.0 L / 427 in 7.4 L / 454 in.
  • Tall Style - Will Clear Roller Rockers & Stud Girdles.
  • Clear Anodized - for Easy Cleaning & Scratch Resistance.
  • Features — 1/4" Thick Billet Aluminum Gasket Rail Perfect for Sealing. Welds — Professional.
Check Stock

JASS GRAPHIX 2D Cotton Farmer License Plate Brushed Aluminum Heavy Duty Cotton Car Tag Made in USA - Officially Licensed (Black)

  • Custom fabricated using our in-house CNC - Photos really don't do these plates justice!.
  • Heavy Duty 3.5mm Black Thick Aluminum with Brushed Aluminum Seal of Cotton Logo Letters.
  • Made to last unlike most other thin and fragile license plates..
Check Stock

Fabricated Aluminum Valve Cover for Small Block Chevy SBC 350 400 265 283 Black

  • A pair of fabricated aluminum valve covers.
Check Stock

VALVE COVER, GROMMET PVC, WITH INTEGRAL BAFFLE .095

  • Designed to work with Fabricated Sheet Metal and Cast Aluminum Valve Covers, without logo, that have a 1.220" diameter hole.
  • Ideal for street enthusiasts using aftermarket valve covers and a positive crankcase ventilation system.
  • Ideally suited for push-in style breather systems.
Check Stock

SportsPlay Aluminum Balance Beam (Painted)

  • Fabricated from 1.88 O.D. galvanized pipe to included 3.5 wide aluminum ribbed planking.
Check Stock