Categories

Best Face Seal Rings

Engine Kit rings rod main bearings gaskets With HP oil pump compatible with 1969-79 Chevy 350 rering Kit

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel Napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

Danco 10826X Wax Ring with Bolts Gray

  • NO MESS TOILET INSTALLATION: The Perfect Seal encapsulates the wax with rubber delivering a strong seal without the sticky mess.
  • TOILET CAN BE REPOSITIONED: Unlike toilet wax rings, the perfect seal allows the toilet to be repositioned as needed.
  • STRONGER SEAL THAN TRADITIONAL TOILET WAX RINGS: The patented seal design delivers a 3 times stronger seal than traditional wax rings.
  • TOILET BOLTS INCLUDED: Complete toilet install kit includes (1) Perfect Seal (2) stabilizing toilet bolts, (2) washers and (2)nuts.
  • HELPFUL INSTALL TIP: If the toilet does not sit flush to the floor upon installation, the black plastic ring inside the gray rubber casing can be removed allowing the perfect seal to be fully compressed floor.
Check Stock

Sterling Seal 9000IR3304GR1500x24 304 Stainless Steel Spiral Wound Gasket with 304SS Inner Ring and Flexible Graphite Filler, Pressure Class 1500#, for 3\ Pipe, Yellow with Grey Stripe (Pack of 24)

  • Sterling Seal & Supply Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange Erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

uxcell Engine Piston Ring Set 42mm Diameter Air Compressor Replacement Parts

  • replacement piston ring set(Included 2 x Balance Rings and 1 x Seal Ring)..
  • The main job of piston rings is to seal the combustion chamber against the piston housing and to channel the heat from piston to cylinder..
  • Provides better seal, improves performance, and decreases oil consumption..
  • Note: Get your air compressor shut down when change piston rings..
Check Stock

Silicone Replacement Gasket, Airtight Rubber Seals Rings for Mason Jar Lids, Leak-Proof Canning Silicone Fitting Seals for Glass Clip Top Jars (White, 10pcs)

  • 【AIRTIGHT WELL】 The replacement silicone gaskets for your glass canisters could create an airtight environment on your preserve and canning jars. The silicone rubber rings can be used for leak proof sealing to keep your fruits crisp, vegetables, spices, herbs, jams, sauces, and beef jerky preserved..
  • 【FIT WELL】 The airtight silicone seal rings fit standard “regular mouth” mason jar lids (3 inches lids), You can select the mason jar with 0.35 Liter, 0.5 Liter, 1 Liter, 1.5 Liters, or 2 Liters container. The inside diameter is 2.7 inches (70 mm), the outside diameter is 3.8 inches (97 mm), and the thickness is 0.87 inches (2.2 mm). Being soft silicone, the gasket sealing rings for mason jar lids will stretch slightly to fit well..
  • 【BPA FREE & DURABLE】 The airtight silicone seal rings are made of eco-friendly and food grade silica gel with long-lasting durability, which are very safe for you and your family when using. They are BPA free, freezer safe, heat tolerant, reusable, durable, and will not absorb flavors and odors..
  • 【EASY REPLACEMENT】 The old rubber seals are easy to wear out after a long time use, you need to replace the seal ring to make it work better, airtight sealing, and protect your jars. You removed the old one, and repl....
Check Stock

Cornucopia Wide Mouth Plastic Mason Jar Lids with Silicone Seal Rings 24-Pack Deluxe Set

  • 48-Piece Set: Receive 2 dozen wide mouth mason jar lids and 2 dozen silicone seal rings.
  • WIDE MOUTH COMPATIBLE: Compatible with wide mouth mason jars such as Ball-Compatible, Kerr-Compatible, Anchor Hocking-Compatible, etc. 86mm / 3.4 Inch....
  • SIZE: 86mm interior lid diameter, fits “wide mouth” mason jars, lid is 3.5 inches by 0.75 inch.
  • MULTI-USE: Great for fridge storage, pantry storage, gifting and sharing snacks and treats and DIY mixes.
  • these lids and silicone rings are not FDA....
  • AIRTIGHT SEAL: The silicone rings allow you to have both an airtight seal and an easy clean lid.
  • both the plastic lids and the silicone rings are....
Check Stock

5 Packs Gaskets 3.22 Inch for Ninja Rubber Gasket Replacement Parts Seal O-Ring White for Ninja Single Serve Blender Blade 6 Fin Compatible with Nutri Ninja Professional 1100w BL660 1500 watt BL770

  • 【Size for Ninja Replacement Gasket】-- Diameter: 3.22 inch / 8 cm, Thickness：0.14 inch / 0.3 cm. Please refer to the picture for the measurement. As there are many kinds of the rubber rings for Ninja blender, before purchase make sure your original Ninja gasket is 3.22 inches / 8 cm small. It is not suitable for 3.94 inch / 10 cm ring seal..
  • 【Compatibility】-- The blender replacement parts are suitable for Ninja Pro extractor assembly 307KKU, 322KKU770.
  • Suitable for Nutri Ninja Single Serve Blender 1100w BL660, BL663, 1500w BL770, 1200w BL780, BL740, BL740-30, BL770, BL770-30, BL770A, BL770A-30, BL771, BL771-30, BL771C, BL772, BL772-30, BL773CO, BL773CCO, BL780, BL780-30, BL780C, BL780CO-30,BL810, BL810C, BL810Q, BL820, BL830..
  • 【Compatibility】-- The blender attachments are suitable for Nutri Ninja blender and the accessories of Ninja are only suitable for Ninja 16-Ounce blender cups, NOT for 18,24,32-Ounce smoothie blender cups. The model number # must be identical..
  • 【Tight Seal and Easy to Install】-- Made of silicone rubber, the washer replacement is sturdier and more flexible to seal the bade assembly all ....
Check Stock

GUOER Mask Can Be Washed Reusable Mask One Size Multiple Colors

  • Worn on the ear Adjustable.5 layer activated carbon filer,filter flexible replacement.
  • M-shaped nose clip for a comfortable fit,Allows for easy breathability.Unisex,One size fits most,White or black mask elastic belt, random delivery.Dust,Smoke,Pollution,Pollen,Gardening,Crafts etc.the projects meet the requirements of GB/T32610-2016 Technical specification of daily protective mask standard..
  • WEAR INSTRUCTIONS.A. Unfold the mask and place it on the face.Unfold the mask and put the filter into the inside layer after that fasten. place it on the face.
  • B. Adjust the straps on both sides of the mask.Apply the two straps on both sides of the mask to your ears and adjust the seal rings attached to ensure comfortable wearing experience..
  • C. Adjust the nasal splint position.Gently press the nasal splint, slowly exerting pressure inward and push from the center to both sides till it is tightly and comfortably fixed to the nasal bridge..
Check Stock

RK34-975XL Backflow Preventer Repair Kit -3/4 1 Complete Repair Kit with Springs

  • Contains instructions, easy to repair, effectively solve the problem of water leakage..
  • Compatible with 3/4-1" 975XL and 975XL2 Reduced Pressure Backflow Preventer..
  • Contains: (1) O-ring for relief valve stem, (1) #1 check spring, (1) #2 seal rings, (1) relief valve seal ring, (1) diaphragm, (2) O-rings for check....
  • Note: Please clean up the debris in the pressure reducing valve during installation to avoid water leakage caused by inability to seal..
Check Stock

Henny Penny Seat Gasket

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal 90003304GR600x24 304 Stainless Steel spiral Wound Gasket with Flexible Graphite Filler, for 3\ Pipe, Pressure Class 600#, Yellow With Grey Stripe (Pack of 24)

  • Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal 90005304GR150X6 304 Stainless Steel Spiral Wound Gasket with Flexible Graphite Filler for 5\ Pipe, Pressure Class 150#, Yellow with Grey Stripe (Pack of 6)

  • Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal 90005304GR300X6 304 Stainless Steel Spiral Wound Gasket with Flexible Graphite Filler for 5\ Pipe, Pressure Class 300#, Yellow with Grey Stripe (Pack of 6)

  • Sterling Seal Style 9000 stainless steel spiral wound gaskets are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Sterling Seal Style 9000 gaskets are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock