OhLectric OL-45392 Ceiling Replacement Fan Blade Arms - Perfect for Fitting With 52 Inch Fan Blades - Easy Installation - Mounting Instruction Hardware Included - Brushed Nickel Arms - Set of 5
- SIMPLE REPLACEMENT: Our ceiling fan blade arm is the best option for replacing your existing ceiling fan's rusted and damaged blades. The blade arms are weightless and stronger when compared to others because of the use of high-quality materials..
- PROMISES STABILITY: When the fan wobbles, the performance, and longevity of the fan are diminished. To assist with this, our fan blade arms are properly calibrated and adjusted for the fan's effective operation by maintaining balance..
- EASY INSTALLATION: The holes of the fan blade’s arms correlate to the fan blades and fan positioning. The arm's modest weight makes it easier to handle and assemble the fan to the blades. The package comes with instructions for installation..
- BEST APPROPRIATE FOR: Most 52-inch fans are compatible with these fan blades. The fan blade outer hole’s width.
- width between the outer hole and center hole, and width of fan motor holes are all considered to build up the arms..
- BEAUTIFUL FINISH: This ceiling fan blade is available in Brushed nickel. This beautiful tint can blend in with any decor and will match a wide range of colored fans. This individuality not only adds elegance to your fan but also nicely complements it..
Check Stock
OHLECTRIC Ceiling Replacement Fan Blade Arms - Perfect for Fitting With 42 Inch Fan Blades - Easy Installation - Mounting Instruction Hardware Included - Antique Brass Arms - Set of 5 - OL-45354
- SIMPLE REPLACEMENT: Our ceiling fan blade arm is the best option for replacing your existing ceiling fan's rusted and damaged blades. The blade arms are weightless and stronger when compared to others because of the use of high-quality materials..
- PROMISES STABILITY: When the fan wobbles, the performance, and longevity of the fan are diminished. To assist with this, our fan blade arms are properly calibrated and adjusted for the fan's effective operation by maintaining balance..
- EASY INSTALLATION: The holes of the fan blade’s arms correlate to the fan blades and fan positioning. The arm's modest weight makes it easier to handle and assemble the fan to the blades. The package comes with instructions for installation..
- BEST APPROPRIATE FOR: Most 42-inch fans are compatible with these fan blades. The fan blade outer hole’s width.
- width between the outer hole and center hole, and width of fan motor holes are all considered to build up the arms..
- BEAUTIFUL FINISH: This ceiling fan blade is available in Antique brass. This beautiful tint can blend in with any decor and will match a wide range of colored fans. This individuality not only adds elegance to your fan but also nicely complements it..
Check StockWestinghouse Lighting 7740200 Fan Blade Arm 42 Antique Brass 5 Pack
- Easily replace worn or broken fan blade arms on your existing fan with this convenient five piece set.
- Traditional antique brass finish complements many ceiling fans.
- Replacement fan blade arms are compatible with most 42-inch fan blades.
- B - fan blade outer hole to center hole 2-5/8-inches.
- Includes installation instructions and mounting hardware.
Check StockWestinghouse Lighting Brushed Nickel Finish 7740900 52-Inch Replacement Fan Blade Arms, Five-Pack, 5 Count
- Easily replace worn or broken Fan blade arms on your existing Fan with this convenient five piece set.
- Popular Brushed Nickel finish complements many Ceiling fans.
- Replacement Fan blade arms are compatible with most 52-inch Fan blades.
- a - Fan blade outer holes 3-15/16-inches.
- B - Fan blade outer hole to center hole 2-3/4-inches.
- Includes installation instructions and mounting hardware.
Check StockNuTone S89222000 Motor Assembly 9417 9417D 9427 9427P 9417DN VH9417 VH9427
- Bathroom exhaust fan replacement: 120 volts, 60Hz, 1A, 50CFM, 3000 Rpm, CCW.
- UL certification: the bathroom vent fan motor replacement equipped motor and plug with fan blade, stable and practical, continuous duty, air over.
- Shaft: 3/16 x 1.5 inch with splines, wire length: 6 1/2 inch with 2 prong plug, fan blade: 4 5/8 inch x 1 1/8 inch.
- Kit contains: 1 x motor, 1 x blower wheel fan blade.
- Ventilation fan motor and blower wheel replacement are compatible with Nutone Broan 659, 662,....
- Motor assembly blower wheel: 1 x motor, 1 x blower wheel fan blade.
Check Stock
ZRVTM Ceiling Fan Duster - 100% Microfiber Ceiling Fan Cleaner Fan Blade Cleaner for Cleaning High Ceiling Fan
- 【Ingenious Design】This ceiling fan dust cover uses a fully wrapped design, which can prevent dust from falling on the furniture and floor below when cleaning the ceiling fan blades. There is NO secondary mess to clean when you are done..
- 【100% Microfiber】Our ceiling fan duster is made of high quality plush cloth, which is soft and comfortable to the touch. This material of ceiling fan cleaner also has strong adsorption, which can stick all the dust inside the dust cover at one time..
- 【Easy To Use】Just cover the fan blade cleaner on the fan blade, and then pull the ceiling fan duster with little force to clean the fan blade. This ceiling fan duster can be used both dry and wet, and can be washed with warm water after cleaning..
- 【Washable & Reusable】Easy to clean the ceiling fan duster cleaner with clean water or warm water or just put it in washing machine. With ceiling fan duster, you can easily solve your troubles and say goodbye to the hard cleaning days in the past..
- 【Product Dimensions and Specifications】You will get 1 PCS ceiling fan duster. The opening of ceiling fan cleaner can be tightened to accommodate ceiling fan blades up to 24.61 x 8.86 inches. The fan blade cleaner fits most ceiling fan models..
Check StockWestinghouse Lighting SL2P 7740600 52-Inch White Finish Replacement Fan Blade Arms Five-Pack 4.38x6.75x1.38 5 Count
- Easily replace worn or broken fan blade arms on your existing fan with this convenient five piece set.
- Basic white finish complements many ceiling fans.
- Replacement fan blade arms are compatible with most 52-inch fan blades.
- A - fan blade outer holes 3-15/16-inches.
- B - fan blade outer hole to center hole 2-3/4-inches.
- Includes installation instructions and mounting hardware.
Check StockRV Vent Fan Blade - White 6 Replacement Fan Blade 3/32 0.094 Round Bore RV Fan Blades for Bathroom Roof Vent Range Hood 2 Pack
- 【12V Power Vent Fan】This rv vent fan blade is replacement blade for 12 voltage power roof vents and range hoods..
- 【Round Bore Size】This fan blade bore is ROUND and measured 3/32 inch (0.094"), equal to standard RV fan motors' bore axle, pls make sure the bore....
- 【Compatible Brands】This fan blade is 6 inch large, widely used for ventilations of RV's, campers and trailer, compatible for Elixir, Heng's,....
- 【Direction of Spin】This fan blade is direct replacement. The finished hub face down, then match the motor shaft recess in. The direction of spin....
- 【Powerful and Quiet】: Our powerful RV vent fan runs strong to exhaust the residual smell in the bathroom, easy to install & run quietly.
Check Stock
Westinghouse Lighting 7701600, Assorted Screws, 1/2 inches screws, (20 Count)
- EASY REPLACEMENT: The Dysmio Fan Blades are the best choice to replace your worn and broken fan blades on your existing ceiling fan. Using the best quality Fiberboard material, the ceiling fan Blades are lighter than most compatible products available in the market..
- WELL BALANCING: Each 5-piece Dysmio Fan blade set is accurately matched to restore balance and increase the performance of your Ceiling Fan. An unbalanced Set of Fan blades will lead to wear and tear of the motor, reducing the life of the fan. The Dysmio ceiling Fan blade set eliminates that problem. Perfect to be used with fans with 5 Blades or less..
- POPULAR FINISHES: The Ceiling Fan Blades comes in White/Bleached Oak finishes. The Light tones are assured to compliment any décor and goes well with any Ceiling colors, Dark toned or light. The finishes not only renew the appearance of your fan, but also redecorates the room with its subtilty..
- REVERSIBLE: The Blade angles are designed to direct the air flow in both directions at the same time. This ceiling fan blade is specially designed. to improve the ventilation. Equal pressure helps in driving off air, increasing the circulation. Best results are achieved when same fan blades are used instead of mixing up with a different brand..
Check StockMid-Autumn Festival Hand-Pressure Moon Cake Mould With 12 Pcs Mode Pattern For 4 Sets
- Each type of moon cake mold with 3 traditional flower pieces, a total of 12 flower pieces. The flaps are random.
- Easy to use, clear lines, easy to shape, easy to demoulder, a good choice for mooncakes.
- 50g round and square: width: 6.7cm, height: 14.7cm.100g circle: width: 6.7cm, height: 15cm.100g square: width: 6.7cm, height: 14.8cm..
- Note: After making the cake, the mould should be cleaned with clean water. After cleaning, the mould should be cleaned with dry cloth immediately..
- 1.Insert the blade bayonet side into the mold. 2. Buckle the flower pieces to the bottom of the mold and align with the groove of the mold.3. Hold the handle and turn clockwise until the flower is fastened..
Check Stock
The Army Painter - Stainless Steel Precision Knife with Soft Grip and 5 Extra Razor-Sharp Scalpel Hobby Knife Blades - Craft Knife Set, Art Knife & Mouldline Remover for Metal and Plastic Miniatures
- FOR HOBBY PROJECTS -This set of 1 hobby knife & 5 hobby knife blades is a key tool for any hobbyist.
- SURGICAL PRECISION AND SHARPNESS -Ultra sharp art blade knife allows to precisely remove mould lines.
- SAFETY GRIP HANDLE-The rubber coated safety handle in this precision knife provides a steady grip.
- CUTS MOST MATERIALS - The craft knife cuts resin, plastic & metal miniature pieces with ease..
- CUT PARTS THAT ARE DIFFICULT TO REACH- Single hobby knife that does the job of a craft knife set..
- ESSENTIAL PRECISION TOOL- Hobby art knife is an indispensable tool for preparing your miniatures.
- SAFELY STORE-The knife comes with a protective head cover for when you need to store the tool safely.
- MOULDLINE REMOVER-Use the backside of the blade to scrape down & remove mould lines with ease.
- THE ARMY PAINTER - Aims to help you get painted models in no time with our hobby tools and paints.
- BORN FROM GAMING – The Army Painter is the brainchild of wargaming & painting veterans of many years..
Check StockCHEERBRIGHT 6pcs 3000# Red Stone/Whetstone Sharpening Stone Polishing Stone Set, Variety of Shapes for Sharpening Polishing
- 6pcs Ruby Whetstone Sharpening Stone Set..
- Shape:Square,Triangle,Semicircle,Cylindrical,Edge,Rectangle..
- The stone can sharpening and polishing for triangle sawtooth, circular saw blade, plane blade edge, small serrated mould..
- 3000# sharpening stone have six shapes for you to use..
- Our sharpeners are great to use for knives, scissors, gravers, blades, shears, hooks, etc..
Check Stock89747 | RF59N, RF69N Nutone Roof Vent Motor # 89747 1600 RPM 6.6 amps 120V
- Bathroom exhaust fan replacement: 120 volts, 60Hz, 1A, 50CFM, 3000 Rpm, CCW.
- UL certification: the bathroom vent fan motor replacement equipped motor and plug with fan blade, stable and practical, continuous duty, air over.
- Shaft: 3/16 x 1.5 inch with splines, wire length: 6 1/2 inch with 2 prong plug, fan blade: 4 5/8 inch x 1 1/8 inch.
- Kit contains: 1 x motor, 1 x blower wheel fan blade.
- Ventilation fan motor and blower wheel replacement are compatible with Nutone Broan 659, 662, 663, 668, 688, 678, 15617, 162502, 02S0055, 0340775B, 101-1770, 14266A, 15194A, 301-3001, 5KSB33BG1858, C202A, CC0053, CC0154, P-10294, P-14266A, P-15194, P-15617, P-608-31-1, P-9983, S10625002, S10625236, S10625237.
- Note: the brands related above are only for purposes of demonstrating compatibility, not use as trademarks, our trademark is Ceoighe.
- Motor assembly blower wheel: 1 x motor, 1 x blower wheel fan blade.
Check Stock
