NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit
- REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
- FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
- BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
- EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check StockFour Seasons 36895 Reversible Fan Kit
- Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan.
- Mercedes-Benz fan clutch wrench removes the thermo-viscous radiator fans found on Mercedes-Benz and Ford vehicles.
- BMW Fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan.
- BMW fan clutch wrench is used to remove and install the thermo-viscous fan on BMWs and Fords.
- Universal fan belt adjustment wrench services Mercedes-Benz Nissan Quest and Mercury Villager radiator fans and pulley belts.
Check StockYHB 32mm & 36mm Fan Clutch Nut Wrench and Water Pump Holder Tool Kit Removal for BMW Fan Clutch Tool Removal kit (3pcs) - Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit
- 【Item name】 Fan Clutch Nut Wrench, Clutch Removal Tool Kit, Fan Clutch Wrench Set, Water Pump Holder Removal Tool Kit, designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan..
- 【Compatible with】Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36.
- 【Applications】32mm Clutch Removal Tool Kit Made to be compatible with BMW engine models M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32.
- 【Features】FEXON Fan Clutch Wrench Set makes it easy to hold water pump pulleys in place while you loosen and service your radiator fan. The tools have been heat treated to improve product performance..
- 【Easy to Use】Quickly removes and installs fan clutch when repairing the water pump or fan clutch..
Check StockBILITOOLS Fan Clutch Removal Tool Kit, Fan Clutch Wrench Set 22 36 40 47 51 MM with Pulley Holder
- Fan clutch service tool set includes 5x Fan clutch wrenches - 22mm, 36mm, 40mm, 47mm, 51mm.
- Special fan clutch wrench tool kit is designed to remove and install fan clutches when repairing or replacing the water pump, timing chain or the fan clutch..
- The pulley holder with 4 pairs of replacement pins is designed to trap and hold bolt on pulleys by the mouting bolts. It is suitable for most vehicles and newer Chrysler engines with press on pulleys requiring sprcial pins to hold housing..
- This fan clutch tool Kit is made from forged steel for superior strength, black finish further improves corrosion resistance for lasting durability..
- The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect..
Check StockElectric Engine Cooling Radiator Fan Clutch for 2002 2003 2004 2005 2006 2007 2008 2009 Trailblazer Chevy GMC Envoy L6 V8 Replace#3201
- Electronic Electric Engine Cooling Fan Clutch Radiator Fan Clutch for 2002 2003 2004 2005 2006 2007 2008 2009 Chevy Trailblazer GMC Envoy.
- For 2002 2003 2004 2005 2006 2007 2008 2009 Trailblazer Fan Clutch Replace#3201.
- Engine Cooling Fan Clutch Radiator Fan Clutch for Chevy Trailblazer GMC Envoy L6 V8 4.2L 6L.
- Meets OE standard quality and performance requirements..
- Please CONFIRM FITMENT before purchase(Check Date Above), 1 Year WARRANTY !.
- If not fit, we accept return, please keep the package clean and products in good condition.
Check StockRadiator Cooling Fan Clutch for BMW 3 5 M Z3 E36 E46 E53 E34 Series e39 528i 525i 530i 338 728i 728il x5 328i 325i 323i 320i 520i Fan Clutch 11527505302
- ★ This part is compatible to: 11521719269, 11527505302, E9738,376732111, LK011, 2100 011 031, 2100011031.
- ★ GOOD QUALITY-Directly replace OEM components BMW fan clutch and will fit exactly for easy installation..
- ★ Fitment: BMW fan clutch,325i bmw fan clutch,bmw x5 fan clutch,bmw e46 fan clutch.
- ★ ★ 2 YEAR WARRANTY:We offer 2 year warranty and lifetime support..
Check Stock
ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set
- REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
- The holder bar keeps the water pump pulley in place while loosening the radiator fan.
- FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
- Also compatible with some Ford, GM, and Chevy models.
- Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
- BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
- 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
- EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
- If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock
JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set with Adapter Case Hose for Car SUV Truck
- PROFESSIONAL TOOLS - On the BMW, this fan clutch wrench will help remove the clutch fan to allow you to access the belts, pulleys, water pump, thermostat and much more. Essential tool kit if you want to DIY some of the basic repairs..
- BUILT TO LAST - Made of premium CV-Steel, the fan clutch wrench removal tool is heavy and solid enough, well machined and finished, with silver tone. They are able to lock the pulley in place and loosen the fan clutch with no issues at all..
- WHAT YOU WILL GET - You can get 4 pieces fan clutch wrench including 2pcs 32mm fan clutch wrench and 2pcs water pump pulley holder. They are both 15 inches in length, and 0.24 inch, 0.2 inch in thickness, respectively..
- WIDE COMPATIBILITY - This tool kit is mainly custom for BMW but not limited to the following models of other brands: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, and S14, S38, S54, S50B30, S50B32..
- WORRY-FREE PURCHASE - If you have any dissatisfaction with our water pump holder tool within 30 days after receiving the product, you can contact us for a refund. Feel free to email us and let us know if you have any questions or feedback about our product. We are dedicated to providing you a satisfactory shopping satisfaction..
Check StockLisle 43300 Pneumatic Fan Clutch Wrench
- Quickly removes and installs fan clutch when repairing the water pump or fan clutch..
- Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
- Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L....
- Use with an air hammer. Includes blow molded storage case..
Check StockLisle 43390 36mm Wrench
- Quickly removes and installs fan clutch when repairing the water pump or fan clutch.
- Faster and easier than conventional fan clutch wrenches.
- For more information check the main Lisle tool- 43300.
Check Stock
cciyu 8"Inch Push Pull Slim Electric Radiator Cooling Fan Mount Kit Universal Plastic Black
- FIT VEHICLES – Radiator/Condenser cooling fan is universal and OE fitment or replacement, push or pull type.
- FEATURES – Our engine cooling fan assemblies are designed to be a direct replacement for the original equipment manufacturer’s part. That means installation is easier, and the part fits as intended.Our fan assemblies are also tested to OEM specifications, so you know the part you’re putting on performs as good or better than the part you’re taking off.
- EASY INSTALLATION – Step 1: For Electric Radiators, Disconnect Electrical Wiring. Step 2: Remove Radiator Fan Shroud.
- Step 3:Remove the Old Fan.use your wrench and/or ratchet and socket set to remove the bolts or disassemble the fan clutch and fan assembly.
- Step 4: Replace Radiator Fan.insert new fan into the space where the old radiator fan was previously installed.
- Step 5: Reattach Electric Wires and Test..
- PAKCAGE INCLUDING – We offer 1 piece of high performance radiator cooling fan and buy with confidence..
- NOTE – Please never mind searching for See all vehicles or look though the description of the item including the picture compared.
Check Stock
OMT Fan Clutch Removal Tool Kit, 32mm and 36mm Fan Clutch Wrench Set Compatible with BMW Ford Mercedes-Benz More, 2pc Water Pump Holder Tool 15' Water Pump Pulley Holder for German Engine Maintenance
- CUSTOM PURPOSE SET: This 2 piece fan clutch removal tool kit includes an extra-long 32mm & 36mm fan clutch wrench and a water pump holder tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines.
- HIGHLY VERSATITLE: This fan clutch nut wrench set precisely fits a wide range of engines, including the M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32 and more.
- GALVANIZED CARBON STEEL: This fan clutch wrench set is made from heavy duty structural steel for reliable strength along the entire shaft.
- each one is further galvanized to resist wear, tear, and corrosion under even punishing use.
- EASE OF USE: The wrench and water pump pulley holder tool are specially lengthened to provide extra leverage with sure grip when working on fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly.
- SERVICE & SUPPORT: OMT backs this water pump removal tool with a 1 year strong warranty and its usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your import cars for years to come.
Check StockProkomon 8PCS Pneumatic Fan Clutch Wrench, 43300 Fan Clutch Removal Tool Kit for Ford, GM, Chrysler and Jeep
- ◇ Durable --- The wrench tool kit is made of sturdy steel, durable and strong, with strong resistance to corrosion and rust..
- ◇ Specifications --- Fan clutch wrench 7/8", 32 mm, 36 mm, 40 mm, 47 mm, 1-7/8" and 2". Wrench tool for Ford 6.0L and 6.4L power-stroke diesel pickups.
- ◇ Easy to Use --- Simply slide the tool into the air hammer to select the correct wrench size for the fan nut, give it a few taps with the air hammer, and the fan clutch will loosen. No need for any other special nailing tools. (Note: Air hammer not included).
- ◇ Function --- Specially designed to help you easily disassemble and install the fan clutch when repairing the water pump or fan clutch. (Please confirm the size you need before purchase).
- ◇ Applications --- Compatible for Ford, Chrysler, GM and Jeep.
- Compatible for 4.3L, 5.0L, 5.7L GM pick up (van, mini-van, or SUV)..
Check Stock
