Categories

Best Fan Header Controller

Cooler Master MasterFan MF140 Halo Duo-Ring Addressable RGB Lighting 140mm Fan, Absorbing Rubber Pads, PWM Static Pressure for 5V 3-Pin ARGB,NOT Work with 4-pin RGB or RGB+12V (Single MF140 Halo)

  • ...rmance Engineered: Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator, low-noise or mesh chassis ventilation while boosting overall airflow.
  • NOTE: (1)The Addressable RGB Light function MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller( NOT included) .(2)It will NOT work with 4-pin RGB or Standard RGB+12V. (3)The ARGB connection header of this case fan is 4-position-3-pin, a 3-position-3-pin ARGB header adapter may need for some Gigabyte motherboard. Please check the ARGB motherboard of your motherboard before purchase!.
  • NOTE for Gigabyte Motherboard Owner: A Gigabyte Adapter Cable may be required to connect "MF140 Halo ARGB" to some models of Gigabyte RGB Fusion Addressable RGB capable motherboard with 3-position-3-pin ARGB Header. "Gigabyte Adapter Cable" or "Addressable RGB LED Small Controller" are SOLD SEPARATELY!.
Check Stock

ID-COOLING XF-12025-RGB-TRIO-SNOW 120mm Case Fan 12V 4PIN RGB Fan PWM Fan for CPU Cooler/Radiator/PC Chassis MB Sync RGB (Remote Control Included)

  • PWM fanThe PWM fan control allows for dynamic speed adjustment between 700 rpm to 1, 800 rpm, minimizing noise, or maximizing airflow. Max. Air Flow: 74.5CFM.
  • Two-way RGB ControlThe RGB lighting can sync with the motherboard, a wired RGB controller is included for non-RGB motherboards for customizing colors..
  • CompatibilityThe standard 120x120X25mm cooling fan is designed to match the CPU cooler, CPU water cooler, pc case, etc...
  • Superior Build QualityHigh quality fan blades and frame built-in extremely even light diffuser. The 120mm fan Blade engineered for Low-Noise operation without sacrificing performance.
  • Easy InstallationStandard 12V 4pin RGB header to Motherboard RGB header.
Check Stock

SCYTHE Mugen 5 Addressable RGB Plus Air CPU Cooler, 120mm Single Tower, Intel LGA1151, AMD AM4/Ryzen, Controller Included

  • ...ibility of memory modules with tall heat-spreader. On LGA2011 and 2066 platforms, it require to use RAM within 55mm tall(Fan should be lifted up with taller RAM module).
  • The top cover and two Kaze Flex fans built with Addressable RGB LEDs are fully synchronized with certified ARGB motherboards(5V header) or included controller(ACT-1000ARL). Easily choose and customize the lighting modes to match color themes of PC builds..
  • Classic 120mm tower cooler with dual Kaze Flex 120 PWM fan(max 1500RPM), the push/pull setup increase better airflow result in enhanced cooling performance. 6 x 6mm heatpipes and copper plate base ensure superior heat dissipation. Ideal for mainstream, gaming, overclocking computers with high TDP processor(9900k, 9700k, 9600k,3700x, 3800x, 3900x, 3950x)..
  • H.P.M.S II mounting system is easy-to-install and secure for socket INTEL LGA 775, 1150/1151/1155/1156/1366, 2011(V3)Square ILM, 2066 Square ILM & AMD AM2(+), AM3(+), AM4, FM1, FM2(+). The mounting system gives precise contact pressure to CPU and supports most popular sockets on the market..
  • Product dimension: (W)136 x (H)157.5 x (D)136mm, Weight: 1060g. Included thermal compound paste and Y fan cable for installing both fans on one CPU fan header..
Check Stock

ASUS Prime B350-Plus AMD Ryzen AM4 DDR4 HDMI DVI VGA M.2 USB 3.1 ATX B350 Motherboard

  • Powered by AMD Ryzen AM4, 7th generation Athlon and HD 2000 series processors to maximize connectivity and speed with NVMe M.2, USB 3.1, DDR4 and Gigabit LAN.
  • 5X Protection III Hardware-level safeguards provide component longevity and reliability.
  • Specially designed fan RGB header to support multi-color CPU fan LED strips.
  • Patent-pending SafeSlot Core fortified PCIe slot prevents damage caused by heavyweight GPUs.
  • FanXpert 2+ delivers advanced fan controls for optimized cooling. Supports CPU up to 8 cores.LAN:Realtek RTL8111H, 1 x Gigabit LAN Controller(s).
Check Stock

3 Pack PWM Fan Splitter Cable 1 to 3 (4 Pin+3 Pin)

  • PC fan splitter cable：these 27 cm extension cables allow you more choice in where you want to position your PWM or fans inside your case, good for your daily use.
  • This Y-type splitter cables is convenient for running three fans on one fan header.
  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header ；Every Pack Compatible With 1 pcs 4 Pin + 2 pcs 3 Pin PMW Fan Connector.
  • CPU fan splitter cable Product function:provide two additional fan to increase airflow in your computer case, reduce the accumulation of heat within the chassis.
  • The 4-pin connector supports 3-pin and 4-pin fans.
  • Temperature control: the pwn fan splitter cable provide additional fans to increase airflow in the computer case, reduce the temperature and ensure the operational speed of CPU.
  • Supports 3 PWM fans from a single motherboard PWM header.
  • Compatible with 4pin PMW fan connector and 3pin fan connector.
Check Stock

upHere 3-Pack High Airflow Quiet Edition White LED Case Fan pwm 4in for PC Cases T4WT4-3

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to....
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using....
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed....
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a....
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler....
Check Stock

ARCTIC Liquid Freezer II 280 RGB (incl. Controller) and Intel LGA1700 Upgrade Kit Bundle - Multi-Compatible All-in-one CPU AIO Water Cooler with RGB and Intel LGA1700 Mounting Kit

  • PERFORMANCE KING: With a more efficient cold plate, proprietary pump and fans optimized for static pressure, the Liquid Freezer II series clearly sets itself apart from other AiO water coolers.
  • ELEGANT ILLUMINATION: 24 digital RGB LEDs placed along the fan hubs plus the transparent rotor, with its closed design, provide even and rich illumination.
  • RGB CONTROLLER INCLUDED: This allows control of the fan LEDs via a free internal USB 2.0 header using ARCTIC's RGB software. A motherboard with RGB header is not necessary.
  • LGA1700 SOCKET WITH MODIFIED HOLE SPACING: With the new CPUs, Intel introduces the LGA1700 socket with modified hole spacing on the motherboard and changes in the mounting height of CPU coolers.
  • LGA1700 MOUNTING KIT FOR LIQUID FREEZER II SERIES: With our LGA1700 mounting kit for the Liquid Freezer II series, you can continue to use your ARCTIC cooler with a new Intel processor.
Check Stock

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

EK AIO 240mm, D-RGB All-in-One CPU Cooler with EK-Vardar High-Performance PMW Fans, Water Cooling Computer Parts, 120mm Fan, Intel 115X/1200/2066, AMD AM4

  • ...compatibility with almost all modern case designs. Socket Compatibility includes: Intel 1150, 1151, 1155, 1156, 1200, 2011, 2011-3, 2066 and AMD AM4.
  • FULLY CUSTOMIZABLE D-RGB LIGHTING - The EK AIO features fully addressable D-RGB lighting, easily customized to match your set-up via your motherboard or standalone RGB controller. The CPU block features an acrylic light diffuser, giving both a dynamic colour display and smooth lighting transitions for a premium D-RGB display. System Requirements: - 4-Pin PWM Header for pump and fan operation - 3-Pin Addressable 5V D-RGB header.
  • ULTRA QUIET D-RGB FANS - The EK-Vardar S included with the EK AIO are industrial grade high-static PWM fans, designed and built primarily for high-performance liquid cooling systems. Controlled by either your motherboard or standalone fan controller, the EK Vardar can be adjusted to run at speeds between 550 - 2200RPM for either high airflow or silent running. Each Vardar fan has fully integrated and customizable D-RGB lighting..
  • PREMIUM AND DURABLE DESIGN - The EK AIO comes pre-installed with reinforced and sleeved rubber tubing, each fitted with an aluminum cover to ensure they’re ultra-durable. Its diamond-cut rotary fittings allow for easy installation and adjustment of the ru....
Check Stock

Cooler Master 1-to-5 ARGB Splitter Cable / 5V - Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support(ARGB 1-to-5 Splitter)

  • Cooler Master 1-to-5 ARGB Splitter Cable，NOT support 12V RGB, Only support 5V RGB.
  • Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support.
  • 3-pin ARGB Header compatibility,2ft/60cm Long and flexible material makes it easy for cable routing. Keep it effortless and hassle free..
  • NOTE: 1. (DO NOT connect an Addressable RGB(ARGB/Digital RGB +5V) Fan to a Non-Addressable RGB(Standard +12V) motherboard header or RGB controller. 2. Beyond the look, Cooler Master provides quality. With high quality material, keep your build reliable and flawless. Certified Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB..
  • Splitter: - Connection Type: Straight Through Wiring (Passive Wiring) - Connector A: 3-pin RGB LED Connector Female - Connector B: 3-pin RGB LED Connector Male.
Check Stock