Categories

Best Fastcap Long Nose Pattern Marker

FastCap Solo Thick Adhesive Refill 2.25 Ounces

  • Thick, 2.25-ounce adhesive refill from FastCap.
  • To use: spread adhesive on one item, spray activator on other, and hold together 10 seconds.
Check Stock

Hiboom Mechanical Carpenter Pencil Set, 3 Pcs Woodworking Pencil with Built in Sharpener and 12 Pcs Refills, 3 Pcs Long Nose Deep Hole Marker Pen, Scriber Marking Tools for Architect Construction

  • ✏️【Practical Carpenter Pencil Tools Set】Our carpenter woodworking pencils set is designed for carpenter, woodworker, architect.
  • The solid carpenter pencil extends 45 mm in length, 5 mm diameter nose tip, which can easily mark in hard to reach spots while other carpenter markers cannot.
  • The deep drill hole long nib marker extends 33 mm in length, 1 mm diameter nose tip, suitable for punch marks, drill narrower holes and cut lines on all materials.
  • ✏️【Mechanical Pencil Built in Sharpener】There is a sharpener in the cap of mechanical drawing pencil, you can sharpen the refills easily to get precise marks at any time.
  • Pocket clip design allows you to hang it on clothes or books, which is convenient for construction and not easy to lose.
  • The construction pencil refill is paired with a 2.8 mm thick pencil, which is firm and sturdy, not easy to break, allowing you to easily complete industrial drawings, even hard table tops also can be marked.
  • ✏️【Waterproof Quick Drying Fine Tip Marker Pen】This long nose marker is made of quality oily ink, which is water resistant, quick drying, not easy to fade, not easy to break ink, allowing you to write smoothly and work more efficiently, no need to worry about blurred handwriting after writing.
Check Stock

luckless 4 Pcs Deep Reach Markers Long Nose Marker Waterproof Deep Hole Marker 30 mm Reach Permanent Markers, 4 Colors

  • DIMENSION: the deep hole marker is approx. 14 x 1.2 cm/ 5.5 x 0.5 inches, with a 30 mm long nib, which can be applied to marker deep hole or wherever is hard to reach, providing carpenters with much more convenience..
  • TOP QUALITY MATERIALS: the shell of the deep reach marker is made of TOP quality ABS material, wear and tear resistant, it has a long pen with a thin, round tip for easy access..
  • WATERPROOF INK: this long nib marker is water-resistant, quick-drying, and can be applied for various surfaces such as wood, metal, glass, and plastic..
  • WIDE APPLICATIONS: The construction marker is suitable for marking location and furniture decoration, metal processing, wood processing industry, glass industry, plastic industry, automobile manufacturing industry, etc., which can satisfy your various requirements..
  • PACKAGE CONTENTS: You will receive 8pcs long nose markers in the package, with 4 different colors, including red, blue, black and white, which can meet your daily uses and replacement..
Check Stock

FastCap 2P-10 Thick 2.25 oz/64g Instant Wood Adhesive Two-Part Ten-Second Adhesive 2.25oz Activator Sold separetly One Bottle

  • ACTIVATOR SOLD SEPARATELY. Can be Mixed with FastCap 2P-10 Colorant. 2-year shelf life guaranteed.
  • Dries clear. Bonds in 10 seconds and cures in 30. Excellent gap filling capacity. Great for binding joints. Ideal for filling holes.
  • Thick adhesive for use on porous surfaces such as particle board. Easy to sand within 60 seconds..
  • Fastcap 2P-10 Adhesive is a 2-Part industrial grade instant glue (Requeres 2P-10 Activator). Excellent adhesion to metal, plastic and elastomeric....
  • Triple distilled for purity. 4000 PSI tensile shear. Non-clogging pin-cap.
Check Stock

FastCap 2P-10 Jel Adhesive 10 Ounce Strongest Available

  • NO NAILS NEEDED: Easily affix pieces of wood to one another without nails or screws.
  • 10 OZ BOTTLE LASTS LONG: 10-ounce bottle of FastCap 2P-10 adhesive for all your woodworking needs.
  • EASY TO USE: 2-part solution for easy, sure results: just apply the adhesive, spray the activator, and join surfaces.
  • THICK GEL STAYS PUT: Jel thickness is ideal for filling in gaps, on vertical surfaces, on porous surfaces, and more.
  • INSTANT RESULTS: Fast-acting design creates a permanent, strong in just 10 seconds.
Check Stock

WISEPRO 6 Inch Long Nose Pliers- High-Leverage - Spring Loaded Pliers for Cutting, Clamping, Pinching

  • Reduce Hand Fatigue: The long nose pliers applied with leveraging principle, put the rivet closer to the cutting edge, less force is required when using..
  • Half-round Jaws: The long nose pliers come with long half round jaws, help rolling wire into a more rounded curve. Narrow nose help working in hard-to-reach areas..
  • Serrated Hatched Gripping Surfaces: The long nose pliers are designed with serrated hatched teeth pattern on the jaws, providing firm gripping and pulling for wire..
  • Side Cutting: The long nose pliers come with hard side cutting edge help striping wire and cut metal wires..
  • Fastener Grip Area: The fastener grip area of the long nose pliers can be used for turning nuts and bolts, and holding many shapes pipe..
  • High-quality Materials: The long nose pliers are made of chrome vanadium，blacking treatment process of pliers surface makes the pliers durable to use..
  • Comfort Grips: The long nose pliers are design with smooth TPR grip handle, ergonomic comfortable grip feeling help reducing discomfort from prolonged tool use..
Check Stock

The Binding Tool

  • INCLUDED: This set includes 2 black permanent deep reach markers, 2 ink refill bottles, and 2 replacement tips all stored in a sturdy reusable case. Also called long reach / nib / nose marker..
  • PRECISION: The metal shaft is 3 mm wide, has a reach of 30 mm, and a felt tip of 2 mm that will provide the strictest precision. Perfect for use on most dry and wet surfaces..
  • HANDLING: Easy one-handed handling. Attach the clip to your pants or belt, place your thumb on the top of the clip, push with your thumb and pull with your index and middle finger until the marker releases from the cap..
  • INK REFILLING: Each marker is refilled with a few drops of ink from the included refill bottles. Simply remove the cap, unscrew the marker head, push the foam back into the barrel, and add at least 3 drops of ink..
  • TIP REPLACEMENT: If your tip wears down it can be replaced by removing and replacing the old tip with a pair of pliers. If the tip is too worn down to grip with pliers, unscrew the marker head, push the foam into the barrel, and then push the rear of the tip out from behind. Place the marker tip down in a cup and wait at least 5 minutes for the new tip to absorb ink. It is recommended to add 3 drops of ink to the foam barrel to speed up the felt tip....
Check Stock

FastCap Long Nosed Pattern Marker, Gold

  • INCLUDED: This set includes 2 black permanent deep reach markers, 2 ink refill bottles, and 2 replacement tips all stored in a sturdy reusable case. Also called long reach / nib / nose marker..
  • PRECISION: The metal shaft is 3 mm wide, has a reach of 30 mm, and a felt tip of 2 mm that will provide the strictest precision. Perfect for use on most dry and wet surfaces..
  • HANDLING: Easy one-handed handling. Attach the clip to your pants or belt, place your thumb on the top of the clip, push with your thumb and pull with your index and middle finger until the marker releases from the cap..
  • INK REFILLING: Each marker is refilled with a few drops of ink from the included refill bottles. Simply remove the cap, unscrew the marker head, push the foam back into the barrel, and add at least 3 drops of ink..
  • TIP REPLACEMENT: If your tip wears down it can be replaced by removing and replacing the old tip with a pair of pliers. If the tip is too worn down to grip with pliers, unscrew the marker head, push the foam into the barrel, and then push the rear of the tip out from behind. Place the marker tip down in a cup and wait at least 5 minutes for the new tip to absorb ink. It is recommended to add 3 drops of ink to the foam barrel to speed up the felt tip....
Check Stock

Yzzsjc 9 Pieces Deep Hole Marker Pens Deep Drill Hole Long Nib Deep Hole Pens Colorful Carpenter Pen Multi-purpose Waterproof Deep Hole Pens for Woodworking,Bathroom Woodworking,3 Colors

  • Deep hole marker: this deep hole marker pen is designed with a 0.79 inch/ 20 mm long tip, which can easily mark in deep holes or wherever is hard to reach, convenient to use..
  • Package include: there are 9 long nose pen in the package ,with 3 different colors,including ren,blue and black.Sufficient quantity and color for daily use..
  • Design: portable pen clip design allowing you to fix the carpenter ink pen on the pocket or notebook to avoid falling or losing.The pen body is designed with a 3 cm/ 1.2 inch scale, allowing you to measure the size, not need to use a ruler.This long nib is quick-drying and can be applied for various surfaces such as wood, metal, glass, and plastic..
  • Quality material: the shell of the deep reach marker is made of quality ABS material,strong and sturdy, not easy to age and has a long service life.It has a long pen body with a thin, round tip for easy access..
  • Wide use: the multi-purpose deep hole marker pens are suitable for marking location and furniture decoration, metal processing, wood processing industry, glass industry, plastic industry, automobile manufacturing industry, etc., which can satisfy your various requirements..
Check Stock

Maryland Historical Markers-Kent, Queen Anne's, & Talbot Counties

  • DURABILITY: Both coin holder and poker chip ball marker feature clear epoxy coating for long-lasting durability..
  • CARRYING CASE: Leather carrying case included with ball marker. Attaches to any golf bag.
  • REMOVABLE: Marker removable with a touch of the arrow.
  • AFFIX: Magnetic ball marker fits securely inside the coin.
  • DESIGN: Brand new double-sided enamel markers, mark your golf ball on grass, both vibrant color and various interesting golf pattern..
Check Stock

Dixon Industrial REACH- Deep Hole Mechanical Pencil with Lead Refills included, Yellow (14301)

  • INCLUDED: This set includes 2 black permanent deep reach markers, 2 ink refill bottles, and 2 replacement tips all stored in a sturdy reusable case. Also called long reach / nib / nose marker..
  • PRECISION: The metal shaft is 3 mm wide, has a reach of 30 mm, and a felt tip of 2 mm that will provide the strictest precision. Perfect for use on most dry and wet surfaces..
  • HANDLING: Easy one-handed handling. Attach the clip to your pants or belt, place your thumb on the top of the clip, push with your thumb and pull with your index and middle finger until the marker releases from the cap..
  • INK REFILLING: Each marker is refilled with a few drops of ink from the included refill bottles. Simply remove the cap, unscrew the marker head, push the foam back into the barrel, and add at least 3 drops of ink..
  • TIP REPLACEMENT: If your tip wears down it can be replaced by removing and replacing the old tip with a pair of pliers. If the tip is too worn down to grip with pliers, unscrew the marker head, push the foam into the barrel, and then push the rear of the tip out from behind. Place the marker tip down in a cup and wait at least 5 minutes for the new tip to absorb ink. It is recommended to add 3 drops of ink to the foam barrel to speed up the felt tip....
Check Stock

HOWOD Pocket Hole Jig Kit, Professional and Upgraded All-Metal Pocket Screw Jig. (Metal)

  • INCLUDED: This set includes 2 black permanent deep reach markers, 2 ink refill bottles, and 2 replacement tips all stored in a sturdy reusable case. Also called long reach / nib / nose marker..
  • PRECISION: The metal shaft is 3 mm wide, has a reach of 30 mm, and a felt tip of 2 mm that will provide the strictest precision. Perfect for use on most dry and wet surfaces..
  • HANDLING: Easy one-handed handling. Attach the clip to your pants or belt, place your thumb on the top of the clip, push with your thumb and pull with your index and middle finger until the marker releases from the cap..
  • INK REFILLING: Each marker is refilled with a few drops of ink from the included refill bottles. Simply remove the cap, unscrew the marker head, push the foam back into the barrel, and add at least 3 drops of ink..
  • TIP REPLACEMENT: If your tip wears down it can be replaced by removing and replacing the old tip with a pair of pliers. If the tip is too worn down to grip with pliers, unscrew the marker head, push the foam into the barrel, and then push the rear of the tip out from behind. Place the marker tip down in a cup and wait at least 5 minutes for the new tip to absorb ink. It is recommended to add 3 drops of ink to the foam barrel to speed up the felt tip....
Check Stock

GOLD PLATED MONEY CLIP with PRESIDENT DONALD TRUMP LOGO on a coin with VELCRO BALL MARKER

  • DURABILITY: Both coin holder and poker chip ball marker feature clear epoxy coating for long-lasting durability..
  • CARRYING CASE: Leather carrying case included with ball marker. Attaches to any golf bag ..
  • REMOVABLE: Marker removable with a touch of the arrow..
  • AFFIX: Magnetic ball marker fits securely inside the coin..
  • DESIGN: Brand new double-sided enamel markers, mark your golf ball on grass, both vibrant color and various interesting golf pattern..
Check Stock