Categories

Best Fasteners Anchor Fasteners Nuts

CRAFTSMAN Hand Impact Driver 3/8-Inch Set CMMT14104

  • VERSATILITY: 5 bits for slotted and Phillips fasteners.
  • EASE OF USE: Easily loosens frozen/rusted screws, nuts or bolts with the hand impact driver.
  • EFFICIENT: Tightens fasteners without stripping.
  • DURABILITY: Creates up to 200 foot pounds of torque when struck with a hammer.
  • FLEXIBILITY: Loosen and tighten Philips and slotted fasteners, as well as drive 3/8-inch sockets..
Check Stock

BOSCH GDS18V-221N 18V EC Brushless 1/2 In. Impact Wrench with Friction Ring and Thru-Hole (Bare Tool)

  • Impact wrench design – built to deliver high torque for tightening such fasteners as lag bolts, concrete anchors and lug nuts.
  • Powerful motor – delivers up to 221 Ft. -Lbs. of torque to drive large fasteners quickly.
  • Auto Bolt Release – stops rotation when there is no torque on tool to prevent accidentally dropping bolts and nuts during removal.
  • Delivers 221 Ft. -Lbs. of torque – ideal for fast tightening and removing of heavy-duty fasteners.
  • Compact tool design – weighs only 2. 77 Lbs. (tool only, not including battery) and has a 6. 4 In. head length.
Check Stock

Cruiser Accessories 81500 Locking Fasteners License Plate Frame Hardware, Ultimate Kit-Stainless Star Pin

  • Our Ultimate Kit is a one stop shop of the best license plate frame hardware on the market, especially if you are unsure if your license plate requires standard or metric hardware.Fit Type: Universal Fit.
  • This hardware kit includes both standard and metric size locking stainless Star Pin fasteners and Rattle Stop hardware to provide everything needed to deter your license plate frame from being stolen and take the 'rattle' out of your license plate.
  • Designed to fit all novelty/license plates for domestic or import vehicles.
  • Includes four (4) Rattle Stop fasteners, four (4) 1/4 x 3/4 inch fasteners, four (4) M6 x 20mm fasteners, four (4) M5 x 20 mm fasteners, eight (8) plastic washers, four (4) lock nuts, four (4) plastic nut grommets and one (1) special Star Pin key for installation.
  • User friendly and easy to install, see back of package for installation instructions.
  • The combination of the pin in the center with the special Star Pin key makes it impossible to remove the screws with a typical allen wrench.
  • These fasteners are made of stainless steel.
  • Designed to fit all standard novelty/license plates.
  • Easy to install (illustrations on back of package).
Check Stock

Bumper Quick Release Fasteners Kit JDM Quick Release Holders Front Rear Bumper Fasteners Trunk Band Fenders Clip Kits for Car Bumper Trunk Fender Hatch Lid red

  • 【Convenience】Can be disassembled quickly, easily and frequently, 1. First take out the bumper quick release fasteners and O-ring rubber, then lift....
  • 【Durable】These bumper washers are made with T6 6061 high quality solid billet aluminum long durability..
  • 【Wide range of applications】This Bumper Fasteners Kit fits for all vehicles,especially for Late Model Vehicles, Import & Domestic To Compatible....
  • 【perfect choice】Aluminum alloy quick release bumper fasteners ensure its stability in use. As a common structural material in auto parts, its....
  • 【Package includes】4 x Aluminum Fasteners.
Check Stock

OZCO 20550 OZ-Fence Post Extender, (1 per Pack)

  • Internal post anchor for wood posts 3.5"to 4" square..
  • Gives you a clean looking, rigid post to surface connection..
  • Great for wood, composite, vinyl surfaces..
  • All galvanized fasteners. Special fasteners required for concrete or stone surfaces..
Check Stock

5,170 Piece Grade 8 Coarse Thread Nut Bolt & Washer Assortment Fasteners Only

  • Sizes Included: 1/4 , 5/16 , 3/8 , 7/16 , 1/2 , 5/8 , 3/4.
  • 5,170 pieces of Grade 8 Coarse Thread hex bolts, lock washers, flat washers, hex nuts and nylon lock nuts finished in a protective yellow zinc coating.
  • 25 years of experience in the fasteners industry and excellent customer service.
  • Please note this listing is for the fasteners only, no storage units are included.
  • Items ship in four boxes via FedEx Express.
Check Stock

Interstate Pneumatics TRB750K 2 in 1 Thread Locker Kit Includes High/Medium Strength 50ml Each Bottle

  • Lock Threaded fasteners from loosening during shock and vibration, Single component with no curing outside of threads, TR750 - Ideal for 1/4" and 1" diameter nuts and bolts, TB750 - Ideal for 1/4" and 3/4" diameter nuts and bolts, Cures in the absence of air without cracking and shrinking, prevents rusting of threads, Can be removed with hand tools, Permanent seal prevents tampering.
  • Prevents loosening of metal fasteners caused by vibrations, Torque Breakaway on 3/8” Steel (TR750): 190 in-lb, Torque Prevailing on 3/8” Steel (TR750): 275 in-lb, Torque Breakaway on 3/8” Steel (TB750): 45 in-lb, Torque Prevailing on 3/8” Steel (TB750): 100 in-lb, Size: 50ml (1.69 Fl Oz), Fixture Time: 10 min., Full Cure Temperature (°F): 77, Full Cure Time: 24 hr..
  • Recommended For: TR750 - Use on metal fasteners up to 1” (25 mm) in diameter such as bolts on decks, ready-to-assemble furniture, mounts, rings, gear bolts and frame bolts, TB750 - Use on metal fasteners 1/4" (6 mm) to 3/4" (19 mm) in diameter such as bolts on small engines, swing sets and furniture.
  • Not Recommended For: Use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials, Use on plastic parts, particularly thermoplasti....
Check Stock

ATV Quad Body Plastic front rear fender fit Taotao only 110B 110cc Black

  • Fitment: Fit for DR-Z400 DRZ400 DRZ 200 250 350 400 650 DR 70 100 110 125.
  • 227 Pieces of Original Factory Fit Flange Bolts, Nuts, Screws, Special Fasteners, And Fender Washers.
  • Function: The Bolts Fasteners Mounted Bodywork, Plastic Bodywork, Engine And Exhaust Mounts..
  • Material: All Our Bolts Fasteners Kit are Made of 9.9 Grade High Quality Heat-Treated Zinc Plated Steel.
  • Easy to Install, No Installation Instructions. Please Refer to the Detailed Description for the Detailed Size of Accessories.
Check Stock

M&M Fasteners 2,510 Piece Grade 8 Coarse Thread Nut Bolt Hex Bolt & Washer Assortment Kit with Metal Bolt Bin, Grey

  • VALUE: This assortment includes 2,510 pieces at a price that is hard to beat by our competitors. Get the most for your money without sacrificing quality..
  • CONVENIENCE: Eliminate trips to the hardware store and stop digging through that bucket of old bolts and nuts in your garage. With this 36-compartment pigeon hole bin all of your fasteners have a spot to call home. Bin labels as seen in picture are included..
  • VARIETY: Numerous sizes of hex bolts, hex nuts, lock and flat washers come with this assortment. Sizes included are 1/4 , 5/16 , 3/8 , 7/16, 1/2.
  • QUALITY: With over 25 years in the industry, we offer the highest quality of fasteners and bins. Customer service is our top priority and we strive to continue to grow our business and keep our customers coming back for more..
  • PLEASE NOTE: Fasteners are shipped FedEx Express and the bolt bin is shipped FedEx Ground. They may be delivered on different days..
Check Stock

Xitomer 251PCS Plastics Engine Body Frame Exhaust Bolts Kit Fit for Raptor 350 600 660 700R, ATV Bolts Kit (Zinc)

  • Fitment: Fit for Raptor 350 600 660 700R.
  • 251 Pieces of Original Factory Fit Flange Bolts, Nuts, Screws, Special Fasteners, And Fender Washers.
  • Function: The Bolts Fasteners Mounted Bodywork, Plastic Bodywork, Engine And Exhaust Mounts..
  • Material: All our bolts fasteners kit is dade of 9.9 Grade High Quality Heat-Treated Zinc Plated Steel.
  • Easy to Install, No Installation Instructions. Please Refer to the Detailed Description for the Detailed Size of Accessories.
Check Stock

5-Pack Black Short RCA Compatible Handset Cords Phone 2 3 4 8 Multi Line ViSys System Executive Series 25215RE1 25255RE2 25423RE1 25424RE1 25425RE1 Receiver Curly Coil 9 Ft Lot by DIY-BizPhones

  • Lock and Seal Fasteners: Prevents loosening of metal fasteners caused by vibration on small motors, mowers, and power equipment.
  • Prevents Rust and Corrosion: Protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers.
  • Removable: Can be removed with hand tools.
  • Easy and Quick: Sets in 10 minutes and fully cures in 24 hours.
  • For 6-19mm Fasteners: Medium-strength formula for use on threads for 6mm to 19mm nuts and bolts.
Check Stock

Quick Cable 5020-2001N Straight Clamp Compression Connectors Negative Polarity 2/0 Gauge Tin Plated Copper Alloy Compression Nuts Color-Coded 1 Width 2.38 Length

  • Made of cast copper alloy, tin plated for added conductivity & corrosion resistance.
  • All clamps, lugs, compression nuts, and fasteners are tin plated.
  • Compression nuts color-coded making identification easy.
  • 2-3/8" length x 1" width x 23/32" height.
Check Stock

The Hillman Group 180210 Coupling Nut 1/4 - 20 50-Pack

  • Threaded fasteners for joining two male threads, most commonly threaded rod.
  • Used to make up long rod assemblies from shorter lengths of rods.
  • Similar to hex nuts with extreme height measurements giving them length.
  • Use with fasteners of the same threading and finish.
Check Stock