Categories

Best Faux Wood Filament

iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1.75mm, 3D Printer Filament 1kg/Spool (20% Wood Powder+80% PLA)

  • 【Parameter】-iSANMATE Wood PLA+ Filament Print Temperature：190℃-225℃. iSANMATE PLA+ filament dimensional: 1.75mm,accuracy +/- 0.03mm, 1KG (2.2LBS)..
  • 【Wood PLA+】- iSANMATE Wood Filament is made up of 20% wood flour and 80% PLA+ with wood color and texture.Able to make products with woody touch.
  • 【High Quality】- iSANMATE Wood PLA + filament has superb layer bonding, and strength and toughness are greater than conventional PLA filament. Easy to use.
  • 【Spool Size】- Spool Diameter:197mm(7.76").
  • 64mm( 2.52") - Spool Hub Hole Diameter: 57mm(2.24")..
  • 【100% Satisfactory Service】-1 year warranty. Provide fast and efficient technical solutions when you have any printing problems. With 24 hours guaranteed reply..
Check Stock

AMOLEN 3D Printer Filament, Ebony Wood PLA Filament 1.75mm, 3D Printing Filament with 20% Real Wood Fiber,1kg

  • REAL WOOD FIBER - There is 20% wood fiber in the ebony wood PLA Filament. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

Creality Ender 3 Pro DIY 3D Printer with Removable Magnetic Bed and UL Certified Power Supply 8.6

  • Full manufacturer's warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians.
  • A sturdy metal frame that is substantially more stable than the Creator's original wood frame.Build volume 8.9 X 5.8 X 5.9 inches.
  • Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process.
  • Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP.
  • Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in].
  • Please refer the user manual below for better use.
Check Stock

SUNLU Wood PLA 3D Printer Filament, 1.75 PLA Filament Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75mm Wood fibers (Real Wood)

  • ① 【20% WOOD Fibers】SUNLU Upgrade Spool Wood PLA Filament is mixture of 20% recycle wood with polymer,Gives prints surface of wood color and texture. The print even smells like wood.SUNLU 1kg Wood filament combines real wood fibers, To satisfy your demands for printing projects of functional parts with wooden texture.
  • ②【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these Wood PLA filaments of 1.75 mm diameter, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • ③【Clog-Free, Bubble-Free & Easy-to-use】SUNLU WOOD PLA 3D Printer Filament is completely mechanically wound, with sturdy fixing holes, 100% tangled free, and manual inspection one by one. Which has an advantage of high purity with low shrinkage. It enables you to have a smooth and stable printing process, with excellent quality prints..
  • ④【Wide Compatibility】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag.
  • Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
Check Stock

Snapmaker Wood Filament 3D Printer Filament 1.75mm, 750g Spool (1.65 lbs) - Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer Wood PLA

  • Dimensional Accuracy and Consistency: Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee Snapmaker wood filaments to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.03 mm.
  • Clog-Free, Bubble-Free, and Easy to use: Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Snapmaker Wood PLA filament. Vacuum sealed with desiccants in a transparent bag, no bubble, and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking..
  • Wood-like, Perform Better and Less Weight: Snapmaker Wood PLA Filament is PLA-based and uses a special foaming technology, which gives it a stable foam structure to mimic actual wood. It enables you to print whatever you want with wood color and texture, and outperforms traditional wood composite in terms of printing quality.
  • Wood-like density makes the filament lighter than traditional PLA filaments and fits a wide range of applications..
  • Wide Compatibility: Snapmaker Wood filament is ideal for use with practically all FDM 3D Printers, such as Ender, Prusa, Makerbot, Flashforge,....
Check Stock

FlashForge 3D Printer Creator Pro, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Dual Extruder W/2 Spools, Works with ABS and PLA

  • Full manufacturer’s warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians.
  • A sturdy metal frame that is substantially more stable than the Creator’s original wood frame.Build volume 8.9 X 5.8 X 5.9 inches.
  • Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process.
  • Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP.
  • Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in].
  • Please refer the user manual below for better use.
Check Stock

LALUZ Farmhouse Chandelier for Dining Room, 4-Light Orb Chandelier Light Fixture for Kitchen Island, Wood Finish, 21” Dia

  • [Farmhouse Orb Chandelier] This gorgeous orb-style ceiling light with dual black and wood finishes, offers an industrial and modern farmhouse look. It featured a round open frame made of faux wood slats, with black finish metal tubes..
  • [Quick Installation] Almost assembled, easy to install for the whole light. This hanging light fixture also works on sloped, slanted or vaulted ceiling..
  • [Perfect Size] This shining one is 21” in diameter.
  • Canopy size: 5 inch diameter and 1 inch height. It comes with 4 rods, 2 for 10” and 2 for 20”, so you can custom the height..
  • [Warm Notice] This orb chandelier requires 4 x E12 base max 40W bulbs (Not Included). It works with vintage filament, LED, CFL bulbs and compatible dimmer switch (Not Included)..
Check Stock

MG Chemicals Wood 3D Printer Filament, 2.85mm, 1 Kg (2.2 lbs.) - Wood (WOOD30W1)

  • 2.85 mm diameter, Wood filament, 1 kg net weight.
  • Suggested print temperature ranges from 185°C to 230°C (365°F-464°F).
  • Diameter tolerance: 2.85Mm: 2.85+/-0.1Mm.
  • Compatible with all fused-filament 3D printers models (sold separately).
Check Stock

MG Chemicals WOOD17W5 Wood 3D Printer Filament, 1.75mm, 0.5 Kg (1.1 lbs.) - Wood

  • 1.75 mm diameter, Wood filament, 0.5 Kg net weight.
  • Suggested print temperature ranges from 185°C to 230°C (365°F-464°F).
  • Diameter tolerance: 1.75mm: 1.75+/-0.1mm.
  • Compatible with all fused-filament 3D printers models (sold separately).
Check Stock

eSUN Wood PLA Filament 1.75mm, Wood PLA 3D Printer Filament, 0.5KG Spool 3D Printing Filament for 3D Printers, Wood Color

  • 【Wood PLA Filament】Special surface like wood, come along with wood's natural and unique texture. Perfect for arts & crafts projects, vases and any other 3D printed items that could benefit from a wood-like appearance. Fulfilled the demand for wooden print models..
  • 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, no bubbles, extremely high successful rate, resulting in an outstanding surface finish and are highly precise..
  • 【Tangle Free & No Plugging】Full 0.5KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle, less stringing, strong layer adhesion. Melt well, feed smoothly and constantly without clogging the nozzle or extruder..
  • 【Environmental Friendly PLA】Wood PLA is a mixture of PLA and recycled wood particles, which produces natural wood effect. Made with starch raw materials derived from renewable plant resources, biodegradable and eco-friendly, non-toxic and low odor..
  • 【Vacuumed Sealed Packaging】0.5KG Spool Wood PLA Filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sea....
Check Stock

SUNLU PETG 3D Printer Filament, PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PETG Blue

  • 【8 Rolls of 0.25kg 1.75mm PLA Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PLA filament.Color:Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure+Yellow.The design of 250g PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
  • 【SUNLU Toughness-enhanced PLA Filament】 SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion.Meet your needs for 3d printing projects on functional parts with higher toughness..
  • 【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
  • 【No Clogging, no Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm PLA filament.It has consistent diameter & roundness,less stringing and warping,strong layer adhesion.Article-free and impurity-free.No impurities,no clogged.Recommended PLA Filament Extrusion/N....
Check Stock

JAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent

  • 【PLA+ Filament Bundle Multicolor】PLA Plus 3D printer filament bundle multicolor, 10 colors in total: Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent. 10 rolls of multicolor 250g PLA+ Filament, individually vacuum packed, 2.5KG in total..
  • 【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better..
  • 【Neatly Wound Filament】Adopting 100% neatly line up filament skill, produced with full mechanical winding and strict manual examination. Making sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
  • 【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
  • 【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of ....
Check Stock

Industrial Rectangle Flush Mount Ceiling Light,Rotatable Metal Frame,Rustic Retro Vintage Farmhouse Light Fixture for Dining Living Room Bedroom Passway Kitchen Hallway Entryway,Faux-Wood Color Finish

  • ...ng and installation parts along with clearly marked cords. The whole installation will take no more than 30 minutes. The light fixture is compatible with low and high ceilings.
  • 【Warm Notice】This light fixture requires 3 x E12 base max 60W bulbs (Not Included) and should be used in 110-130V. It works with vintage filament, incandescent, LED, smart, CFL bulbs. This 3 light ceiling lighting is dimmable when you use a compatible dimmer switch (Not Included) and dimmable bulbs (Not Included). We will give you 100% satisfaction, 30-Day Money-Back Guarantee and 3 Years Warranty. Any concerns please feel free to contact us.
Check Stock