Categories

Best Fc Attenuator

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock

MDS-200A Amp 1600V Three-Phase Diode Module Bridge Rectifier Power Module Provide for Single Phase Rectification

  • Measuring power range -75 ~ +16 dBm (external RF attenuator can be extended to 100dBm).
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (6DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (10DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (40DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (20DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (30DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (Only 1 Pcs of 3DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

USDR/USDX HF QRP SDR Transceiver SSB/CW Transceiver 8-Band 5W Ham Radio & Handhel Mic

  • 【IRF Tube】Using IRF series transmitting tube to ensure its being durable & can be used to connect to an antenna (instrument base)..
  • 【Lightweight&Cost-saving】The original QCX circuit is greatly simplified, and the installed components are reduced by 50 percent to save you the trouble of complicated transformer windings and wiring procedures..
  • 【Less Power Consumption】Thanks to the EER transmitter E-level, it boasts high power efficiency and no bulky heat sink is required..
  • 【DSP Function】Automatic gain control (AGC), noise reduction (NR), voice trigger, voice trigger Xmit (VOX), RX attenuator attenuator (ATT), TX noise gate, TX driver control, volume control, dBm/S-meter..
  • 【Quality Material Handling】Laser marking aluminum laser, aluminum knobs with translucent silicone buttons..
Check Stock

HMC472 Digital RF Attenuator Module DC-3.8GHz Parallel 0.5dB Step 31.5dB Attenuation Value

  • Attenuation Factor and Step Size :The HMC472 is a wideband 6-bit digital attenuator with an attenuation range of 0 to 31.5 dB and a typical step error of ± 0.25 dB..
  • Operating Frequency Range :Adopt QFN surface mount package, uses single power supply 5V, working frequency range from DC to 3.8 GHz..
  • Insertion Loss :Insertion loss is less than 2.0 dB (typical) and IIP3 is +54 dBm..
  • Objects Used :Suitable for a variety of RF and IF applications..
  • Attenuation Control Interface :Manually adjust the control through the 6-position pin header on the board..
Check Stock

Fully B31N1535 Replacement Laptop Battery Compatible with Asus ZenBook UX310 UX310UA UX310UQ UX310UF UX410 UX410UA UX3410UA UX410UQ U4000U U400UQ UX410UF RX310U - 11.4V 48Wh/4240mAh

  • Replacement for Part Number: B31N1535 3ICP7/60/80 0B200-02020000.
  • Compatible Models: For Asus Zenbook UX310 UX310UA UX310UA-1A 1C UX310UA-FB035T FB038T FB097T FC062T FC073T FC075T FC088T FC089T FC106R FC114T FC132T FC137T FC153T FC255T FC331T FC347T FC348T GL003T GL011T GL085T GL123T GL151T RB52 UX310UQ UX310UQ-1A 1C FC396T GL011T UX410UA GV010T UX410UQ UX410UQ-1A 1C Series..
  • High recycle life,high energy density and long life battery.
  • 12Months warranty ,30Days money retum guarantee.
Check Stock

Hantek 20:1 Passive Attenuator for Pico 300v Max 10Mhz Passive Oscilloscope Signal Attenuator for Automotive Diagnostics Use,HT201

  • The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products..
  • Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition..
  • Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V).
  • 【What you will get】 1 x HT201 Signal Attenuation.
  • 【Please Note】 After receiving the product, please check whether it is damaged. If you have any questions, please contact us in time. This product is a consumable and needs to be replaced regularly. Once the product is used, the warranty is not allowed..
Check Stock

1M-8G RF Power Meter Power Attenuation Set Digital Display Signal Strength Module Radio Frequency Power Meter

  • Large Range: The measuring power range of this RF power meter is -60～-5 dBm (External RF attenuator can be extended to 100dBm), and the frequency range is up to 8000MHz..
  • Specific Feature: The RF power meter is light, compact and convenient, with a measurement power resolution of 0.1 dBm, and an output interface SMA_K..
  • Clear Display: This RF power meter comes with an LED screen, the data is clear and straightforward, and it is easy to use..
  • Standard Structure: The precise mechanical structure of the RF power meter makes the measurement accurate, convenient and reliable..
  • Quality Assurance: The RF power meter has been inspected many times before it leaves the factory to confirm the quality..
Check Stock