Categories

Best Fc Type Fiber Optical

GESD Visual Fault Locator 30km Fiber Optic Cable Tester Meter Red Light VFL with 2.5mm Universal Connector for FC/SC/ST Adapter Pen for CATV Telecommunications Engineering Maintenance

  • ...tor will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
  • 30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output power Design with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
  • Wide ApplicationUniversal 2.5mm connector designed for ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
  • optical device production and research. LC interface requires additional adapter..
  • 100% Money Guarantee10 years OEM factory competency, Most efficient technical support with superb processing technologyOur committed to provide the best product and services to every customer..
Check Stock

uxcell 10dB SC Fiber Optic Attenuator, SC/UPC Female to SC Male Single Mode 9/125 Adapter

  • [MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

Visual Fault Locator 30KM, VFL Fiber Optic Light Source Tester 30mW, Red Light Pen Equipment for 2.5mm Universal Connector, FC/SC/ST/LC Adapter for CATV Telecommunications, Fiber Network Cable Test

  • ...tor will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
  • 30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output powerDesign with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
  • Wide ApplicationUniversal 2.5mm connector designed for LC,ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
  • GESD Warranty10 years OEM factory competency,Most efficient technical support with superb processing technologyOur committed to provide the best product and services to every customer,please do not hesitate to contact us,We are looking forward to your feedback..
Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
  • ✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
  • professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
  • ✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....
Check Stock

EZ-FIT New LC Fiber Optic LCUPC-5DB Optical Attenuator LC-UPC Fiber Attenuator 5dB Singlemode Fixed Fiber Optical Attenuator

  • [MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

Fiber Visual Fault Locator 30mW 30KM, VFL Fiber Optic Cable Tester Meter, Red Light Pen Tester Adapt LC/FC/SC/ST Interface, Fiber Network Cable Test Kit Fiber Light Source Testers(Aluminum)

  • 【Wide Application】Universal 2.5mm connector designed for LC, ST, SC, FC interferes both in the circle and square shape of different fiber optic cables, test for both single-mode and multi-mode cables. Apply To: Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
  • 【Detection Distance】This visual fault locator has a strong light source output power of 30mW, constant output power the strong red light goes 20-30 kilometers far in fiber optic cable, high effective power circuits provide stable power, continuous-wave and pulsed mode..
  • 【Practical Design】Small size and lightweight, pen-type design with pouch make it portable, easy to check fiber faults with visual fault locator, design with a stainless steel head and aluminum body to prevent crash and dust, the case ground design prevents ESD damage efficiently..
Check Stock

FTTH Fiber Cold Connection Tool Kit 19 in 1 with FC-6S Fiber Cleaver 10KM Visual Fault Locator Optical Power Meter Cable Tester Stripping Tool

  • 10KM aluminum alloy visual fault locator fiber optic cable tester meter for CATV test,Universally connector for test different ST,SC,FC interfaces.
  • Handheld fiber optical power meter FC ,SC cable tester,Wavelength range: 800~1700,Power measurement range: -70~+10.
Check Stock

uxcell FC Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell FC UPC Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

VFLTOOL Fiber Optic Termination Tool Kit - 9 in 1 Assembly FTTH tool kit with FC-6S Cleaver Optical Power Meter Finder - 30km Visual Fault Locator Optical Pliers Cable Cutter Stripper

  • FTTH Equipent Accessories: 9 in 1 Assembly FTTH tool kit Includes Optical Power Meter which works with LC, FC, ST, SCAPC, 30km Visual Fault Locator....
  • Optical fiber cold construction kit is Fttx FTTH rapid connection in the construction of rubber insulated wire stripping, fiber cutting, cleaning and....
  • For All Tools and Parts Included: It is an ideal tool for construction operators. Can be used for indoor cable stripping coating layer and positioning....
  • Portable & Travel: Light weight small size easy to operate Can be used for indoor cable stripping coating layer and positioning length It can be used....
  • We source our own fiber products for HDTV, SDI, and Analog MATV systems. your mission critical supplier for all Optical Fiber needs. FTTH optical....
Check Stock

Fiber Cutter Mechanical Precise Cleaver Fiber Optic Termination Tool Fiber Termination Preparation,Patch Cords Fiber Jumper Customization

  • CFS-2 Fiber Coating Plier:250 μm coated fiber of 125 μm fiber.
  • This FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers.
  • High Precision Cleaves Provides approximately 36,000 cleaves.
  • Light weight, small size, easy to operate.
  • Made of high quality metal, provides a long service life..
Check Stock

M16 Fiber Optic Power Meter FC Adapter Fiber Optic Interface Connector Optical Tester Accessories Inner Diameter 16mm / 0.63in Outer Diameter 18mm / 0.71in

  • Coupling: Used for the coupling of optical fiber power meter..
  • UEasy to Use: Simple structure, easy to install and use..
  • Scope of Application: This FC adapter fits fiber optic power meter and optical light source..
  • Good Performance: Good compatibility, stable performance, high reliability..
  • High-Quality Materials: Made of high quality metal, sturdy and durable in use..
Check Stock

FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves for SUMITOMO with 36000 Cleaves and Coating Diameter: 250μm - 900μm 12 Position Blade Cold Connection Tools Fiber Equipment Used in FTTH

  • FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves Used in FTTH, Applicable fibers: Single-Mode or Multimode Silica optical fiber.★ Cold Connection Tool Equipment Bare fiber diameter:125um,Coating diameter:250-900um.
  • Cleaving angle: 0.5-0.8 degrees with single fiber..
  • Replicable Blade: Contained 16 Position Rotatable blades, Blade life: Provides approximately 48000 times (100*16*3) cleaves.★ Durability & Compact body: High hardness aluminum alloy materials, Lightweight and rugged design for longer life and increased durability..
  • Scientific Design: The fiber cleaver Built-In Fiber Holder can hold 250μm and 900μm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal..
  • High Precise Cleaving: Provides a cleave with a cutting angle of less than 0.5°for optimal fiber preparation for fusion splicing, Coating Diameter: 250um ~ 900um buffer fiber. Large & small adjustable knife, easy to operate. Non-slip bottom,easy to use..
  • Wide Application: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice..
Check Stock