Categories

Best Felt Seal Bearing

Sealmaster NP-24 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-1/2" Bore, 1-15/16" Base to Center Height, 5-3/8" Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

Sealmaster NP-20R Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-1/4" Bore, 1-11/16" Base to Center Height, 4-3/4" Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

Wrench Rabbit New Complete Engine Rebuild Kits for Yamaha R Raptor (05-13), YFM 350 X Warrior (87-04) WR101-209 , Black

  • Vertex Piston Kit standard compression piston, rings, pin and clips. Hot Rods Heavy Duty crank stock stroke - includes wrist pin bearing for two strokes. Hot Rods main bearing/seal kit Hot Rods transmission bearing kit includes transmission bearings, output shaft collar and sprocket lock washer. Hot Rods counter balancer bearing. Kit Hot Rods water pump bearing and seal kit. Vertex complete gaskets kit including seals and O-ring kit (covers top and bottom). Hot Cams cam chain..
  • Fit: Convenient one stop shop in a box! Kit contains oversized +0.5mm piston kit, heavy duty crankshaft, main bearing and seal kit, balancer bearing kit, transmission bearing kit, waterpump bearing and seal kit, complete gasket and seal set, and cam chain (if applicable).
  • Meets or Exceeds OEM Specs for Fit and Performance.
Check Stock

Sealmaster MP-32 Pillow Block Ball Bearing, Non-Expansion Type, Medium-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 2" Bore, 2-1/2" Base to Center Height, 6-3/4" Bolt Hole Spacing Width, ±2 degrees Misalignment Angle

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

OEMTOOLS 27119 Bearing and Race Installer Set, Seal Driver Set, Bearing Race Installer, Seal Installation Tool, Bearing Install Tool, Axle Seal Installer

  • ASSIST IN REPAIRS: This bearing race and seal driver set aids in wheel bearing repairs and rotor repairs.
  • Remove and install bearing races of all sizes with bearing driver set.
  • Bearing race punch set helps correct suspension system.
  • PREVENT DAMAGE: The seal installer kit prevents damage to race and axle housing.
  • Don’t have to use a power tool to use this bearing and seal driver.
  • EASY TO USE: The heavy duty seal driver takes minutes to use and saves energy.
  • Race bearing and seal driver set comes with easy instructions.
  • Discs and handles with tool bearing and race installer set can be organized in sturdy carrying case.
  • ADAPTABLE FIT: Bearing installation tool comes with 9 driver discs to fit most standard wheel bearings.
  • Driver discs with set are: 1.565 inch, 1.750 inch, 1.965 inch, 2.325 inch, 2.470 inch, 2.555 inch, 2.830 inch, 2.995 inch, and 3.180 inch.
  • VERSATILE TOOL: Flip discs in bearing pusher over and use to install seals.
  • Bearing and race installer kit is multifaceted.
Check Stock

HADOR Brush Weather Stripping 11/32\ x 11/32\ x 16 ft,Felt Pile Fuzzy Weatherstrip Self Adhsive Brush Seal Weatherstripping for Sliding Windows and Door Frame White

  • {High Density Felt Weatherstrip}-This door felt seal strip constructed of synthetic pile weatherstrip with plastic backing. High density brush seal, soft in touch, closely woven pile weatherseal material, felt weatherstrip made with environmental protection, provide all season protection against, drafts, dust..
  • {Upgraded Package For Felt Seal Strip}-The brush weather stripping size of 11/32-inch x 3/16-Inch,neatly coiled up in carboard envelop as a roll, No Twist and straggly, without distortion, durable and flexible..
  • {Multi-Functional Felt Strip}-The Pile Weatherstripping Soundproof, windproof, dust proof, weatherproof,block draft,water and light. Reduce heating costs in winter and cooling costs in summer..
  • {Widely Use}-The brush seal strip widely used for side gaps on sliding door and windows, french door, screen door, patio door, commercial door, armoires, wardrobe, closet, cupboards and so on, brush weather stirpping to improve energy efficiency by sealing gaps and leaks which allow outside air to enter, and inside conditioned air to escape. suitable for all kinds of aluminum, wood, metal etc..
  • {Easy Installation}-The fuzzy Weatherstrip self and Strong adhesive backing for easy installation, stick firmly, less lint, long life time..
Check Stock

Highway Capacity Manual 2000 (HCM2KE)US UNIT

  • REPLACEMENT PART: Washing Tub Seal (4036ER2004A), Tub Seal Gasket (4036ER4001B), Large Bearing (4280FR4048L), Small Bearing (4280FR4048E) fit for Kenmore / Sears, LG.
  • HIGH QUALITY: External Fluororubber and Internal Steel Plate Tub Seal.
  • Large Bearing and Small Bearing with Double Seal.
  • POSSIBLE PROBLEM REPAIRING: Help to repair Noisy, Leaking, Shakes and Moves.
  • WARM PROMPT: Cut off the Power Supply When Installing to Prevent Accidents （If you don't know the size you need, and your model is not on the list, it should Not work for your Front Load Washer）.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this REPLACEMENT PART, simply return it for a full refund in 30 days. Premium Support & 12 months Warranty.
Check Stock

Hunter: The Complete 3rd Season (DVD) - Fred Dryer (DVD - 2011)

  • Part Number W10612022 (AP5737110) replaces 279857, 2813247, 3406130, PS8691753, W10352407, W10389561, W10612022VP, W10663495, W10725245, W10856781..
  • This seal goes onto the back of the drum to keep heat from going into the dryer cabinet. You will need about 5 clamps to hold seal in place as you stretch seal around back rim of drum (put glue on drum rim about 12-16 inch area and then work seal in that area and keep doing same way until you get all of seal on. You may have to release a couple clamps to stretch seal at very end.) You may have to use gasoline to get glue off your hands and clamps..
  • Let glue dry for an hour or so before installing drum back into dryer cabinet..
  • Dryer drum felt seal kit Include:W10612022 dryer felt seal*1,high temperature adhesive*1.
  • Buy with Confidence - SZHY-LINK parts always come with a 1 year warranty.
Check Stock

Dryer Felt Drum Seal W10612022 AP5737110 for Whirlpool Kenmore PS8691753 279857

  • Part Number W10612022 (AP5737110) replaces 279857, 2813247, 3406130, PS8691753, W10352407, W10389561, W10612022VP, W10663495, W10725245, W10856781..
  • This seal goes onto the back of the drum to keep heat from going into the dryer cabinet. You will need about 5 clamps to hold seal in place as you stretch seal around back rim of drum (put glue on drum rim about 12-16 inch area and then work seal in that area and keep doing same way until you get all of seal on. You may have to release a couple clamps to stretch seal at very end.) You may have to use gasoline to get glue off your hands and clamps..
  • Let glue dry for an hour or so before installing drum back into dryer cabinet..
  • Dryer drum felt seal kit Include:W10612022 dryer felt seal*1,high temperature adhesive*1.
  • Buy with Confidence - SZHY-LINK parts always come with a 1 year warranty.
Check Stock

LAFORMO Boat Trailer Hub with Bearing Kit - Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 3500 lbs Axle…

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle.
  • Bearing Kit Specifications:Outer bearing # 44649-- 1 1/16"/Inner bearing # 68149-- 1 3/8"/Seal inside diameter 1.719"/Seal outer diameter 1.983".
  • Package Includes:2 x Hub / 2 x Inner bearing / 2 x Outer bearing / 2 x Seal.
  • Feature:The surface of the hub is galvanized..
  • These Hub are very suitable for ship trailers to withstand the harsh seawater environment..
Check Stock

Timken 710685 Axle Shaft Seal

  • Yukon axle bearing and seal kits are specially designed for each application and use all high quality bearings and seals.
  • Axle bearing and seal kit for C10 Aero truck, 2.800" OD, 1.620" ID.
  • This axle bearing and seal kit services one side only.
Check Stock

Front Load Washer Tub Bearings and Seal Kit For LG & Kenmore Etc Replacement Part 4036ER2004A 4280FR4048L 4280FR4048E 4036ER4001B

  • REPLACEMENT PART: Washing Tub Seal (4036ER2004A), Tub Seal Gasket (4036ER4001B), Large Bearing (4280FR4048L), Small Bearing (4280FR4048E) for Kenmore / Sears, LG.
  • HIGH QUALITY: External Fluororubber and Internal Steel Plate Tub Seal.
  • Precision ABEC 5 rated Large Bearing and Small Bearing with Double Seal.
  • POSSIBLE PROBLEM REPAIRING: Help to repair Noisy, Leaking, Shakes and Moves.
  • WARM PROMPT: Cut off the Power Supply When Installing to Prevent Accidents.
  • SATISFACTION GUARANTEE: If you’re not 100% satisfied with this REPLACEMENT PART, simply return it for a full refund in 30 days, no questions asked money back guarantee. Premium Support & 18 months Warranty.
Check Stock

Diesel Front & Rear Crankshaft Seal/Wear Sleeve Installer for CAT 3406 3408 C-15

  • Yukon axle bearing and seal kits are specially designed for each application and use all high quality bearings and seals.
  • Axle bearing and seal kit for C10 Aero truck, 2.800" OD, 1.620" ID.
  • This axle bearing and seal kit services one side only.
Check Stock