Categories

Best Female Threaded Coupling

HangTon HE29 Electrical Circular Industrial Waterproof Connector 12-15mm Cable Plug (14 pin)

  • Cable Range: 12-15mm, Wire Size: ≤2mm² or 14AWG, Contact Diameter: Φ1.8mm.
  • Rated Voltage/Current : AC 380V/10A, Resistance: 2mΩ.
  • Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
  • Waterproof IP68, threaded coupling, quick disconnect, solder male female cable plug.
Check Stock

Dixon BCM76 Brass Hose Fitting, Machined Coupling, 3/4\ GHT Male x 3/4\ Hose ID Barbed

  • Coupling for connecting two hoses or pipes with the same diameter in a straight run.
  • Connects to a hose on one end and a GHT female connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • For use with rubber (styrene butadiene), neoprene, Viton, leather, or rubber gaskets (not included).
  • Hex nut for tightening threaded fitting with a wrench.
Check Stock

Outland Firebowl Natural Gas Conversion Kits for Specified Models of Portable Propane Fire Pits,Complete 3 Piece Set - CSA Certified - Quick & Easy Conversion (781 NGCK Manual for FMPPC2F-863 Cypress)

  • ✓ PERFECT FOR OUTLAND FIREBOWL CYPRESS MODEL 863 (FMPPC2F-863 Cypress): For use with the Outland Firebowl Cypress Model 863 (FMPPC2F-863 Cypress) only. Not compatible with any other model Outland Firebowl or any model Outland Fire Table..
  • ✓ SAFE & CSA CERTIFIED: Natural gas conversion kit is CSA approved and includes CSA certified marking tags for hanging placement on fire pit exterior..
  • ✓ COMPLETE CONVERSION KIT: Includes natural gas valve (5/8”-18 UNF male gas flare inlet connector), 12-Ft low pressure natural gas hose (5/8”-18 female threaded gas flare connector), and solid brass quick connect/disconnect coupling (3/8”-18 NPT female threaded inlet connector)..
  • ✓ QUICK & EASY TO USE: Step-by-step instruction manual provides clear directions with detailed illustrations.
  • quickly convert your Outland Firebowl Cypress Model 863 in under 30 minutes..
  • ✓ SIGNATURE OUTLAND LIVING QUALITY: at Outland Living we stand behind our high quality outdoor products. If you require any assistance with your Natural Gas Conversion Kit our friendly and knowledgeable customer support will make sure to make it right!.
Check Stock

8 Pack 1/4-20 X 7/8\ Long Hex Coupling Nut with Zinc Plate NCUP004C000STLZN

  • Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
  • Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.
  • Country of Origin: Taiwan, Province Of China.
Check Stock

SZJELEN WEIPU ST1210/ST1213 Threaded Coupling IP67 2Pin~9Pin Waterproof Connector Plug and Socket,Industrial Electrical Female Male Connector (4Pin)

  • Model : WEIPU ST1210/ST1213 Series 4Pin Connector.
  • Material : Zinc alloy with black nickel plating:Termination:Solder.
  • Aviation Connector + Socket, IP67 Waterproof,Threaded Coupling,Solder Termination.Widely used in various machine tools, locomotives, electricity, post and telecommunications, communications, navigation, instrumentation, lighting systems, medical and oil exploration and other fields..
  • If you need a different type of connector, please contact us..
Check Stock

Twinkle Star 2 Pack 3/4" Brass Garden Hose Connector with Dual Swivel for Male Hose to Male Hose, Double Female

  • Material: Solid brass construction for maximum strength and durability..
  • For connecting threaded size swivel 3/4″ male hose to male hose..
  • Package Include: 2 pack swivel coupling connector for garden hose..
  • No Leak: Double female kit was made with precision process, easy connect and disconnect..
  • 100% SATISFACTION GUARANTEE! If for any reason you’re not 100% SATISFIED, please let us know and our customer service team will help you RETURN OR REFUND..
Check Stock

Blue 2\ x 100' Pool Pump Water PVC Hose - Backwash Filter Discharge Drain Hose - Blue Lay Flat Trash Pump Rubber Hose

  • Male coupling - Aluminum 2 inch Pipe Thread (NPT).
  • Female Coupling - Brass 2 inch Straight Pipe Thread (NPSH) With Gasket.
  • The Female Coupling Will Only Connect To A Male 2 inch NPT PVC Pipe, Pool Pump or Metal Pipe.
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type A included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...IZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE A FITTINGS]: The item include a type A (male adapter x female NPT threaded ) cam and groove hose fitting, you can directly screw onto pump male threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • [EASILY USE]: It can be easily connected, after Type A is connected to the pump, just slide type A male adapter into type C female coupler, press the brass cam levers down with n....
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type F included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...[SIZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE F adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE F FITTINGS]: The item include a type F (male adapter x male NPT threaded ) cam and groove hose fitting, you can directly screw onto pump female threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • [EASILY USE]: It can be easily connected, after Type F is connected to the pump, just slide type F male adapter into type C female coupler, press the brass cam levers down with....
Check Stock

Frigidaire 18FFDHMH01 Dehumidifier Drain Hose 12 Foot Black

  • Drain hose continuously drains water from dehumidifier for uninterrupted use.
  • 12 foot hose length can be cut to fit your installation needs.
  • Universal 3/4" threaded garden hose style coupling allows easy installation.
  • Place washer inside coupling, screw hose coupling onto dehumidifier or collection pan, and place opposite hose end into drain.
  • Rubberized 12' drain hose is durable for peace of mind.
Check Stock

Dixon FAB250N Aluminum Hose Fitting King Short Shank Suction Coupling with Brass Nut 2-1/2 NST Female x 2-1/2 Hose ID Barbed

  • Coupling for connecting a hose to a pipe or fitting.
  • Hose barb on one end and female NST threads on the other.
  • Aluminum shank for resistance to corrosion and chemicals and brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses and a rubber seal for high elasticity and resistance to abrasion and impact forces.
  • Nut for tightening threaded fitting with a wrench.
Check Stock

Rego 7141F Quick Disconnect Service Check Valve Connector, 1-1/4

  • Quick disconnect coupling for the LPG cylinderDescriptionQuick disconnect coupling for the LPG cylinder. 1-1/4" ACME female inlet by 1/4" NPT female outlet..
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock