Categories

Best Female Threaded Elbow

2-Pack Premium Stainless Steel Washing Machine Hoses - 4 FT No-Lead Burst Proof Inlet Supply Lines - 90 Degree Elbow Connection - 10 Year Warranty

  • ONE PAIR of 304 stainless steel braided premium washing machine hoses 4ft long each with 3/4" 90 Degree Elbow connection..
  • BURST PROOF - Designed to last, our hoses use true 304 stainless steel for braided outer protective cover which last incredibly long time for effective protection against rust and burst. Some other hoses may not use real 304 stainless steel for the braided cover and could result in rust even burst..
  • INDUSTRY STANDARDS - Our hoses comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372.
  • UNIVERSAL FIT - Our hoses connect to all washing machines with industry standard 3/4" FHT(Female Hose Threaded) or FGH(Female Garden Hose) 90 degree elbow connector fittings. Easy installation for home laundry room water supply lines..
Check Stock

Johnson Controls VG7882ET Series VG7000 Bronze Globe Valve, Three-Way Mixing, Brass Trim, Union Sweat End Connection, 1/2\ Valve Size, 1.8 Cv

  • Elbow globe valve with rising stem and threaded bonnet for on/off actuation and flow control (throttling) in a pipeline.
  • Bronze valve body and disc for strength and corrosion resistance.
  • Pounds per square inch (gauge) (psig) rating of 200 for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP).
  • Threaded bonnet for reduced risk of leakage.
  • Female National Pipe Taper (NPT) threads on both ends for connecting to male threaded pipes.
Check Stock

2-Pack Premium Stainless Steel Washing Machine Hoses - 8 FT No-Lead Burst Proof Red and Blue Lined Water Inlet Supply Lines - Universal 90 Degree Elbow Connection - 10 Year Warranty

  • ONE PAIR of 304 stainless steel braided premium washing machine hoses 8ft long each with 3/4" 90 degree elbow connection. Red lined for HOT water and....
  • BURST PROOF - Designed to last, our hoses use true 304 stainless steel for braided outer protective cover which last incredibly long time for....
  • INDUSTRY STANDARDS - Our hoses comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372.
  • UNIVERSAL FIT - Our hoses connect to all washing machines with industry standard 3/4" 90 degree elbow FHT(Female Hose Threaded) or FGH(Female Garden....
  • MONEY BACK GUARANTEE - We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality....
Check Stock

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 3/8 x 3/8 Tube OD,50065-06

  • 90-degree elbow for connecting two tubes at an angle.
  • Female compression tube fitting for connecting to male threaded pipes.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to 250 degrees F.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

2-Pack Premium Stainless Steel Washing Machine Hoses - 6 FT No-Lead Burst Proof Inlet Supply Lines - 90 Degree Elbow Connection - 10 Year Warranty

  • ONE PAIR of 304 stainless steel braided premium washing machine hoses 6ft long each with 3/4" 90 Degree Elbow connection..
  • BURST PROOF - Designed to last, our hoses use true 304 stainless steel for braided outer protective cover which last incredibly long time for....
  • INDUSTRY STANDARDS - Our hoses comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372.
  • UNIVERSAL FIT - Our hoses connect to all washing machines with industry standard 3/4" FHT(Female Hose Threaded) or FGH(Female Garden Hose) 90 degree....
  • MONEY BACK GUARANTEE - We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality....
Check Stock

Spears 1413 Series PVC Tube Fitting, 90 Degree Elbow, Schedule 40, Gray, 2' Barbed x NPT Male

  • 90-degree elbow for connecting flexible polyethylene tubing to pipe at an angle.
  • Barbed male insert on one end and male NPT threads on the other end for connecting flexible tubing to female NPT threaded pipe.
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2609 standards for quality assurance, and certified by NSF International for potable water service.
Check Stock

2-Pack Premium Stainless Steel Washing Machine Hoses - 5 FT No-Lead Burst Proof Water Inlet Supply Lines - Universal 90 Degree Elbow Connection - 10 Year Warranty

  • ONE PAIR of 304 stainless steel braided premium washing machine hoses 5ft long each with 3/4" 90 Degree Elbow connection..
  • BURST PROOF - Designed to last, our hoses use true 304 stainless steel for braided outer protective cover which last incredibly long time for....
  • INDUSTRY STANDARDS - Our hoses comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372.
  • UNIVERSAL FIT - Our hoses connect to all washing machines with industry standard 3/4" FHT(Female Hose Threaded) or FGH(Female Garden Hose) 90 degree....
  • MONEY BACK GUARANTEE - We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality....
Check Stock

Tefen - 12256908083 Nylon 66 Hose Fitting 90 Degree Elbow Adapter Gray 1/2 Hose ID x 1/2 NPT Male Pack of 10

  • 90-degree elbow for connecting hose or tubes at an angle.
  • Connects to hose on one end and a female NPT threaded connection on the other.
  • Nylon 6/6 for lightweight, strength, and resistance to corrosion from most chemicals and solvents.
  • Maximum operating pressure of 200 psi (14 bar) at 68 degrees F (20 degrees C) in a temperature range of -5 to +230 degrees F (-20 to +110 degrees C), subject to application.
  • Hose is secured with a Tefen snap clip (not included).
Check Stock

2 1/2-13 Thinwall Thread Repair Inserts

  • 【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
  • 【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
  • 【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
  • 【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
  • 【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..
Check Stock

Legris 3199 06 10 Nylon & Nickel-Plated Brass Push-to-Connect Fitting 90 Degree Elbow 6 mm Tube OD x 1/8 BSPP Male

  • 90-degree male elbow to connect a tube to a female threaded connection at a 90-degree angle.
  • Push-to-connect metric tube connection on one end and male BSPP threads on the other end.
  • Nylon body and nickel-plated brass sub-base.
  • Handles pressures up to 290 psi (20 bar), an operating temperature range of -20 to +80 degrees C (-4 to +176 degrees F), and a vacuum capability of 755 mm Hg.
Check Stock

Powercoil 3534-3/8K UNF 3/8-24 Thread Repair Kit (1 Kitper Pack)

  • 【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
  • 【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
  • 【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
  • 【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
  • 【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..
Check Stock

Birchwood Casey 264/6.5Mm Brass Push Jag, Multi, One Size (BC-41353)

  • 24/.243/6mm caliber brass Jag - female threaded.
  • For Use with J. Dewey 8/32 female threaded Cleaning rods, and any Cleaning rods with 8/32 female threads.
Check Stock

TOPINCN Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing Thread Master Repair Kit M6 x 1.0 x 8.0mm 25pcs

  • Made of high‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners.
  • Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can significantly improve thread strength and wear resistance.
  • Form a high‑strength, wear‑resistant, high‑accuracy standard female thread when you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials.
  • Wire thread inserts can be used to convert between and inch thread holes, which is convenient and fast.
  • When a thread error occurs or a damaged female threaded hole is repaired, threaded insert can be used as a repair method. Repairing the threaded hole in a cost‑effective manner.
Check Stock