Categories

Best Fender Strat Push Button Volume

Wilkinson 52.5mm (2-1/16 inch) Vintage Style Full Block ST Guitar Tremolo Bridge Pop-In Arm 6 Screws for Squier/Mexico Fender Strat, Chrome

  • Fits most modern Squier Strat or Mexico Fender Stratocaster or American Standard Series with 6 mounting screws style ST tremolo bridge. It also fit many import ST style guitar, but may NOT fit a USA vintage Strat, measure it before you buy.
  • Genuine Wilkinson parts. Six 10.5mm wide vintage style saddles, 52.5mm (2-1/16 inch) string spacing.
  • 6 mounting screws, 52.5mm (2-1/16 inch) screws spacing.
  • Full short block, 13mm thickness, 36mm depth, correct size will fit Squier thin body(like Standard, Affinity, Bullet, Player, Contermporary,Classic Vibe, Vintage Modified series etc) and thick body, easy to replace. We will sell 40mm depth block separately.
  • Pop-in whammy bar arm, easy to push in. Vintage style bent saddles and correct color combination will dress up your Squier/Fender guitar.
  • Includes full bridge set and mounting accessories. Ready to use.
Check Stock

HEALLILY Dual Concentric Control Knobs Stacked Knobs for Electric Guitar Bass

  • Dual knurled concentric knobs, strong metal shell with great endurance and durability..
  • Great replacement for your broken, dirty or old volume tone control knob..
  • Control the tone and volume on the same pot. To be used with the dual concentric pot..
  • Compatible with all most Fender Strat/ Tele/ Gibson Les Paul electric guitar or bass..
  • Fits 6MM import concentric pots and split shaft pots,no screw hole on the knob..
Check Stock

DiMarzio DP116 HS-2 Guitar Pickup White

  • Great for neck or middle position use in combination with a humbucker For use in any position in Strat* configurations Wiring: Standard 4-conductor Magnet: Alnico 5 Output: 90mV DC resistance: 14.97K *Strat is a registered trademark of Fender..
  • It was the first humbucking Strat replacement pickup we made, in the early 1980s.
  • Perfect for use in neck or middle position for guitars with a humbucker in the bridge, or in any position in a classic Strat* configuration.
  • Works well through high-gain racks and preamps.
  • Eric Johnson found that wiring an HS-2 for single coil operation produces an incredible vintage tone.
Check Stock

ShareGoo Guitar 3 Single Coil Pickup Cover 2 Tone Knobs 1 Volume Knobs Switch tip,Black

  • The pickup cover compatible with Strat guitar pickup cover fender stratocaster electric guitars,This pickup cover just compatible with SSS guitar..
  • Includes 3pcs pickup covers, 1 volume and 2 tone knobs and 1 switch tip..
Check Stock

Wilkinson 52.5mm (2-1/16 inch) Full Block ST Guitar Tremolo Bridge Pop-In Arm 6 Screws for American Vintage Narrow Spacing Strat, Chrome

  • Fits American vintage narrow spacing Strat style guitar, like Highway one or American Special, also can but use for custom ST guitar. It may NOT fit a USA modern Strat, measure it before you buy.
  • Genuine Wilkinson parts. Six 10.5mm wide saddles,52.5mm (2-1/16 inch) string spacing.
  • 6 mounting screws, 56mm (2-7/32 inch) screws spacing..
  • Full short block, 13mm thickness, 36mm depth, correct size will fit Squier thin body (like Standard, Affinity, Bullet, Player, Contermporary, Classic Vibe, Vintage Modified series etc) and thick body, easy to replace. We will sell 40mm depth block separately.
  • Pop-in whammy bar arm, easy to push in. Polished saddles and correct color combination will dress up your Squier/Fender guitar.
  • Includes full bridge set and mounting accessories. Ready to use.
Check Stock

Saddle for Electric Guitar, 6 Roller Bridge Saddles for Fender Strat Tele Electric Guitar 4 colors(Gold)

  • Fits many Mexico/Asian made Strat or Reissued vintage guitar's tremolo bridges with 52.5mm (2-1/16 ") string spacing, like Fender Mexico, Fender Japan, Squier Strat etc. Please check your guitar bridge size before buy.
  • Individual saddle: Length: 21.5mm (27/32"), width: 10.5mm (13/32"), metric screw thread.
  • Made of steel, long last life. It is a good option to replace your existing tremolo bridge for more sustain, smoother feel.
  • Includes a wrench for saddle height adjustment, intonation/height screws and springs.
Check Stock

Wilkinson Deluxe 52.5mm (2-1/16 inch) Full Block ST Guitar Tremolo Bridge Pop-In Arm Six Screws for American Vintage Narrow Spacing Strat, Chrome

  • Fits American vintage narrow spacing Strat style guitar, like High way one or American Speical, also can but use for custom ST guitar. It may NOT fit a USA modern Strat, measure it before you buy..
  • Genuine Wilkinson parts. Six 10.5mm wide saddles,52.5mm (2-1/16 inch) string spacing.
  • Six mounting screws, 56mm (2-7/32 inch) screws spacing..
  • Full short block, 13mm thickness, 36mm deepth, correct size will fit Squier thin body(like Standard, Affinity, Bullet, Player, Contermporary,Classic Vibe, Vintage Modified series etc) and thick body, easy to replace. We will sell 40mm depth block separately..
  • Pop-in whammy bar arm, easy to push in. Polished saddles and correct color combination will dress up your Squier/Fender guitar.
  • Includes full bridge set and mounting accessories. Ready to use.
Check Stock

Musiclily 11-Hole HSS Prewired Loaded Pickguard with Single Coil Pickups Set for Fender Squier Strat Electric Guitar, 4Ply Tortoise Shell

  • Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option.
  • 11-Holes standard HSS strat style pickguard, large back shielding.
  • Standard single-coil pickups, ceramic magnet, wax potted, output: 5.7K ohm for neck and middle, 12.5K ohm for bridge.
  • Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws.
  • Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode.
Check Stock

Musiclily 11-Hole SSS Prewired Loaded Pickguard with Single Coil Pickups Set for Fender Squier Strat Electric Guitar, 4Ply Black Pearl

  • Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option.
  • 11-Holes standard SSS strat style pickguard, large back shielding.
  • Standard single-coil pickups, ceramic magnet, wax potted, output: 5.7K ohm for neck and middle, 6.0K ohm for bridge.
  • Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws.
  • Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode.
Check Stock

Musiclily Pro 10.5mm Steel Vintage Style Guitar Tremolo Bridge Saddles for Fender Strat Stratocaster Electric Guitar Chrome Set of 6

  • Fits many Mexico/Asian made Strat or Reissued vintage guitar's tremolo bridges with 52.5mm (2-1/16 ") string spacing, like Fender Mexico, Fender Japan, Squier Strat etc. Please check your guitar bridge size before buy.
  • Individual saddle: Length: 21.5mm (27/32"), width: 10.5mm (13/32"), metric screw thread.
  • Made of steel, long last life. It is a good option to replace your existing tremolo bridge for more sustain, smoother feel.
  • Includes a wrench for saddle height adjustment, intonation/height screws and springs.
Check Stock

Musiclily 11-Hole SSS Prewired Loaded Pickguard with Dual Hot Rail High Output Pickups Set for Fender Squier Strat Electric Guitar, 3Ply Black

  • Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc. , good replacement or upgrade option.
  • 11-Holes standard SSS strat style pickguard, large back shielding.
  • Dual hot rail single coil sized humbucker pickups, ceramic magnet, wax potted, 9K ohm high ouput.
  • Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws..
  • Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode..
Check Stock

Seismic Audio Electric Guitar Pickguard SAGA14

  • Designed for Strat style guitars from any manufacturer.
  • Aftermarket replacement for Fender Stratocaster guitars.
  • High quality and easy to install - Great for Luthier projects.
Check Stock

SSS Loaded Pickguard Prewired Strat Guitar Scratch Plate 11 Holes with Single Coil Pickups Set for Fender USA/Mexican Standard Straocaster Guitar Parts, Cream Yellow 3Ply

  • Strat pick guard and pickups set is suitable for American Fender & classic style electric guitar, SQ, MTM, 11 screw mounting holes in the side of pickguard, please verify the pickguard dimensions when you order the item..
  • The Prewired scratch plate with neck/middle/bridge single coil pickups, ceramic magnet with 250K pots and 5 way switch,volume tone control knobs, 11 screws. It's a great way to save money and easy to build up your solidbody guitar, only need to take a few minutes to wire your output jack and grounding to your guitar bridge..
  • 3 Pickups have bright spanky articulate single coil sound, classic staggered flat fixed pole pieces, sealed humbucker are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. Pickups Resistance: approx. Neck 5.75K.
  • Bridge 6.4K, Pickups Pole Spacing N/M/B: 50mm.
  • 11-Holes standard SSS strat style pickguard is made of 3Ply PVC plastic material, Cream/Black/Cream, 1 layer thin protective film on the front surface of the pickguard, peel off after installation, durable and uneasily damaged when use, PURE aluminum foil shield on the backside, better shielding property and anti-interference..
  • Modified Guitar Tone: These pickups sound fantastic, really clear and musical ....
Check Stock