Best Ferric Chloride Hexahydrate

Bio-Groom Sure Clot Styptic Powder 1.5 Oz

• USE: Bio-Groom’s Sure Clot is a fast-acting styptic powder for pets. The formula, specially developed by Bio-Groom, helps stop bleeding from clipping nails, trimming breaks, and on minor cuts..
• HOW IT WORKS: Styptic powder is the ultimate way to deal with your pet’s bleeding nails. Styptic powder is an antiseptic clotting agent that effective stops bleeding by contracting the blood vessels..
• VERSATILE: Can be used on dogs, cats, and birds..
• DIRECTIONS: Dip your pup’s nail in the Sure Clot powder, or apply to the cut area with the moistened cotton tip applicator. Use moderate, constant pressure until the bleeding stops. For external use only..
• INGREDIENTS: Ferric Subsulfate, Bentonite, Diatomite, Aluminum Chloride, Ammonium Chloride, Copper Sulfate, and Iodine Complex..

Sunfood Magnesium Oil Spray | Premium Pharmaceutical Grade | Sourced from Dead Sea Salt | Easily Absorbed | Highly Concentrated- 125mg Magnesium Per Spray | 4 oz Bottle

• Food/pharmaceutical grade Magnesium Chloride Hexahydrate, the best form of magnesium.
• Great for sore muscles & muscle cramps. Can help reduce pain and inflammation.
• When sprayed on the skin, our Magnesium Oil is almost immediately assimilated by the body, channeled directly to the cellular level.
• Ultra-purified and safe, free of contaminants and preservatives.
• Topical spray is easily absorbed with little to no stinging or itching, no tacky or oily feeling.

Ferric Chloride - 1 Quart - 1000 ML - Copper Etchant Solution - Stainless Steel Etching Cream

Armour Etch Glass Etching Cream 2.8 Ounce New Look!

1/2\ (.500) Hot Rolled Steel Plate 8\ x 12\ Free Fast Shipping!

• 1080 is a moderately high carbon content forging steel used for making knives. This oil quenching steel is in the annealed state..
• Iron alloy contains 0.88% carbon, 0.90% manganese, 0.05% sulphur, and 0.04% phosphorus..
• Layer 1080 with 15N20 to forge Damascus, and etch with Ferric Chloride to bring out the contrast. Higher carbon steels like 1080 will keep an edge much better than stainless steels, but are also more susceptible to rust without proper care..
• All orders from Texas Knifemakers Supply are shipped USPS Priority Mail (2-3 business day delivery) with a tracking number. Order multiple items to combine on shipping and save!.

Duradry PM Antiperspirant Gel - Prescription Strength Antiperspirant Gel for Women and Men, Hyperhidrosis Deodorant for Armpit Sweat Prevention - Unscented, 0.4 Fl Oz (Pack of 3)

• POTENT ANTI SWEAT FORMULA- Don’t let armpit sweat keep you from performing your best. Use our antiperspirant/clinical strength deodorant for women and men with aluminum chloride hexahydrate and salicylic acid. Our unscented gel antiperspirant helps control perspiration.
• WON'T STAIN CLOTHES- Duradry PM antiperspirant won’t leave unsightly marks on your clothes. Apply a pea-size amount of this excessive sweating treatment to your armpits at bedtime.
• GREAT FOR TRAVEL - Stay confident, sweat and odor-free wherever you go with this antiperspirant for women and men. It comes in a secured, no-leak tube that fits perfectly inside your backpack or toiletry bag.
• PROTECTS UP TO 8 WEEKS - Our no sweat deodorant keeps you protected from sweat and foul body odor for up to 8 weeks (per tube). Experience its full benefits with 3 tubes in this bundle, 24 months of protection!.
• DERMATOLOGIST RECOMMENDED - This antiperspirant gel, which puts a stop to excessive sweating, its tried and endorsed by dermatologists. For best results, use with Duradry AM stick deodorant.

Texas Knifemakers Supply - 1080 High Carbon Annealed Forging Steel Barstock for Knife Making - 1/8' x 1-1/2' x 12'

• 1080 is a moderately high carbon content forging steel used for making knives. This oil quenching steel is in the annealed state..
• Iron alloy contains 0.88% carbon, 0.90% manganese, 0.05% sulphur, and 0.04% phosphorus..
• Layer 1080 with 15N20 to forge Damascus, and etch with Ferric Chloride to bring out the contrast. Higher carbon steels like 1080 will keep an edge much better than stainless steels, but are also more susceptible to rust without proper care..
• All orders from Texas Knifemakers Supply are shipped USPS Priority Mail (2-3 business day delivery) with a tracking number. Order multiple items to combine on shipping and save!.

Texas Knifemakers Supply - 1080 High Carbon Annealed Forging Steel Barstock for Knife Making - 1/8' x 1-1/4' x 12'

• 1080 is a moderately high carbon content forging steel used for making knives. This oil quenching steel is in the annealed state..
• Iron alloy contains 0.88% carbon, 0.90% manganese, 0.05% sulphur, and 0.04% phosphorus..
• Layer 1080 with 15N20 to forge Damascus, and etch with Ferric Chloride to bring out the contrast. Higher carbon steels like 1080 will keep an edge much better than stainless steels, but are also more susceptible to rust without proper care..
• All orders from Texas Knifemakers Supply are shipped USPS Priority Mail (2-3 business day delivery) with a tracking number. Order multiple items to combine on shipping and save!.

BCQLI 100 PCB Circuit Board Thermal Transfer Paper A4 Size Transfer Paper DIY Circuit Board Special Paper

• Size: A4 / Color: Yellow / Quantity: 100.
• 1 with a laser printer to print circuit board wiring diagram of the heat transfer paper surface(Note: can only be printed with a laser printer can not use inkjet printer!).
• 2 with a laminator adjusted to between 150-180 degrees Celsius, the heat transfer paper printed with a circuit diagram deposited in the copper-clad side for transfer.
• the system can also be used in place of iron plate machine, hand transfer.
• 3 After printing remove the transfer paper, CCL will be etched into the ferric chloride solution.
• 4 Finally, cleaning with gasoline toner board, sanding paper or water in the water to flush out carbon(For more success stories please check customer reviews).

Stanley National N180-174 Stanley Square Key Stock, 1/4 in W X 12 in L, Steel, quot quot L

• 15N20 is a bright and acid resistant metal commonly used for forging with high carbon steels to draw out the contrast in Damascus patterned billets for knives and swords..
• Its iron is alloyed with 0.88% carbon, 0.40% manganese, 2.0% nickel, and 0.10% phosphorus and silicon. (The number 15N6 may be written on the bar, this is the product SKU, not the nickel content).
• Dimensions are 0.065" x 1-1/2" x 11-1/2"..
• Layer 15N20 with high carbon steels like 1080, 1095, 5160, etc. to forge Damascus, and etch with Ferric Chloride to bring out the contrast. The nickel in 15N20 resists the acid, remaining bright..

Hi-Contrast 15N20 Steel Barstock for Making Carbon Damascus Knives -- 0.065' x 1-1/2' x 11-1/2'

• 15N20 is a bright and acid resistant metal commonly used for forging with high carbon steels to draw out the contrast in Damascus patterned billets for knives and swords..
• Its iron is alloyed with 0.88% carbon, 0.40% manganese, 2.0% nickel, and 0.10% phosphorus and silicon. (The number 15N6 may be written on the bar, this is the product SKU, not the nickel content).
• Dimensions are 0.065" x 1-1/2" x 11-1/2"..
• Layer 15N20 with high carbon steels like 1080, 1095, 5160, etc. to forge Damascus, and etch with Ferric Chloride to bring out the contrast. The nickel in 15N20 resists the acid, remaining bright..

11.5 x1.57 x0.06 15N20 Steel Flat Stock Bar Hi Contrast Blade Billets Blanks Annealed High Carbon Steel Barstock for Professional Hobbyist Use Making Forging Carbon Damascus Knives DIY 2 Pieces

• Adequate Quantity: you will receive 2 pieces of 15N20 steel bar stock, the ideal tool steel chosen by the tool manufacturer, sufficient quantity to meet your daily use and replacement needs.
• Suitable Size: the length of 15N20 steel flat stock is 11.5 inches/ 29.3 cm, width is 1.57 inches/ 4 cm, thickness is 0.06 inch/ 0.15 cm, the right size for you to build your own knife, to provide you with long service.
• Alloy Content: bar stock for knife making is an alloy of iron with 0.75 percent carbon, 0.3 percent silicon, 0.4 percent manganese, 0.02 percent phosphorus, 0.02 percent sulfur, 0.01 percent chromium, 0.01 percent ni and 0.01 percent vanadium.
• Quality Steel Plate: 15N20 is a bright, acid resistant, wear resistant metal, usually applied with high carbon steel forging, durable, can be applied with confidence.
• 15N20 is applied with other high carbon steel such as 1095 to forge Damascus knife.
• If it is etched with ferric chloride and no obvious light is found, it may be a problem with the last step of polishing.
• Widely Applicable: high carbon steel has nice toughness and grinding degree, which makes it ideal for a variety of handmade DIY blades, knives, hand tools, shims, and more.

Vet Worthy Styptic Powder for Dogs (0.5 oz Powder)

• Stop Bleeding Nails: This Styptic Powder for Dogs from Vet Worthy helps to stop bleeding of minor cuts, declawing, nail clipping and more. It contains Ferric Subsulfate formula that helps to stop bleeding. Quick, effective, and safe for your dogs.
• Effective Formula: The key ingredient Ferric Subsulfate helps stop bleeding of minor cuts. Ideal for all breeds and ages.
• Safe & Effective: It is safe for all breeds and ages! This Styptic powder is proven effective. Veterinarian Formulated..
• Easy to Use: Apply generously to the area with a moistened cotton swab and apply moderate pressure until bleeding stops..
• Quality Made: Vet Worthy is an American Company that offers a wide variety of products that are proudly made under strict quality control to provide healthy benefits for furry friends.. Because a Healthy Pet is a Happy Pet.