Best Ferrule Fittings

Litorange 3 Pack Metal Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter, 3/8\ Tube OD x 1/2\ NPT Male

• ★ 【Material】: Heavy Duty Brass,strong and durable. Size: 3/8" Tube OD x 1/2" inch NPT Male Adapter..
• ★ 【Firm And Durable】: Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability..
• ★ 【Function】: Fitting connects to tubing on one end and has an NPT male connector on the other. Use with copper, brass, aluminum, or plastic tubing..
• ★ 【Tips】: Single ferrule compression fitting has fewer possible leak paths than twin ferrule fittings. Primary uses water, gasoline, oil and vacuum lines..
• ★ 【Package Include】: 3 PCS 3/8" Tube OD x 1/2" NPT Male connector. Comes with 1 year warranty..

Exchilerator Ready To Brew - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counter Flow Wort Chiller

• EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
• USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo).
• READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included).
• 5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
• COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.

Victor 0384-2101 Journeyman Edge 2.0 540/510, 90° Plus Outfit

• Includes 2 barbed hose splicers and 4 hose ferrules.
• Common USA torch inlet and regulator outlet connections.
• Low pressure, less than 200 psig gas service.
• Repair your 1/4-Inch hose in the field, (ferrule crimper not included).

Scientific P-300X Fittings; 1/8\ x 1/4-28, Ferrule; 10/Pack

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

• ...orcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
• ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing..
• ✅[QUALITY AFTER-SALE SERVICE] If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out a satisfactory solution to your problem. 12 hours response service!.

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

• ...rcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
• ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing..
• ✅[QUALITY AFTER-SALE SERVICE] If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out a satisfactory solution to your problem. 12 hours response service!.

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

• ...orcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
• ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing..
• ✅[QUALITY AFTER-SALE SERVICE] If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out a satisfactory solution to your problem. 12 hours response service!.

VKALTUL Pipe Olive Remover Puller Tool Easy Removal Without Damage, Olive Puller Ferrule Puller, Compression Sleeve Puller Suitable for Brass Olive Pipes with Diameters of 1/2in & 3/4in

• 【No Damage】VKALTUL pipe olive remover puller tool is used to remove used or damaged olives from the air-conditioning pipes without damaging the pipe by uillizing compression fittings to lock nut. It can increase torque and remove olives more easily..
• 【Two in One】The olive puller is combined with one double hex and one single hex wheel socket. The double hexagonal one is suitable for 1 / 2 inch diameter brass pipe, and the single hexagonal one is suitable for 3 / 4 inch diameter copper pipe. Two in one design is easy to carry and store, and does not occupy space..
• 【Premium Material】This compression ring removal tool is made of solid brass with high strength, high hardness, corrosion resistance, wear resistance, high finish, which have long service life..
• 【Easy to Use】Ferrule blaster ferrule puller is easy to operate, and you can work without reading the manual or using other tools, reducing the working time and improving the working efficiency..
• 【Save Effort】The zinc-plated Tommy bar at the head of ferrule puller is designed by the lever principle, and can move left and right according to the demand to achieve the effect of labor saving..

Crescent C10CV 10-Inch Curved Jaw Locking Plier with Wire Cutter

• Can ream and smooth inside and outside of conduit.
• Ideal for liquid tight fittings and caps.
• Has an integral wire cutter for increased versatility..
• Compound action for powerful non-slip locking grip..
• Precisely machined ferrule for fine jaw adjustment..

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф3)

• Simple push in design for connecting to the tube and provide secure connection, requires no extra sealing..
• This straight connector has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
• - Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems..
• Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
• Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..

Anderson Metals Brass Push-On Hose Fitting, Connector, 5/8\ x 5/8\ Barb

• These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

1.5\ Tri Clamp Ferrules, SS304 Long Weld Clamp Ferrule for Sanitary Fittings 2PCS

• Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
• Fit for all other homebrew stuff sanitary fittings..

Bysn 1/8 T316 Stainless Steel Cable Aircraft Cable for Deck Railing 7 x 7 Strands Construction Braided Steel Cable 500FT Wire Rope Cable for Railing

• This flexible Stainless Steel cable making it easy to work with, and has a low co-efficient of stretch. Its ease of use makes it excellent for use with Thimble and Ferrule fittings as well as hydraulically swaged fittings..
• Cable is stainless steel for maximum durability, strength and weather protection..
• 7x7 construction (7 groups of 7 strands braided together to form the cable), which is flexible. Good type of cable for handling bends and corners on cable railings..
• Cable Material: T316-Stainless Steel,Cable OD: 1/8 inch, Cable Breaking Strength: 1780 lb.
• This Wire Rope Cable Can Be Used For Indoor and Outdoor.