Categories

Best Ferrule Needle Valve

DERNORD Butterfly Valve with Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 Inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

1pc 2inch Sampling Valve Ferrule Sanitary Stainless Steel Valve Quick Sampling Rubber Diaphragm

  • 【High Quality Material】The sampling valve is made of high-quality SUS304 stainless steel, chemically stable, durable and anti-rust.
  • 【Food Grade】During the sampling process, our food grade hygienic sealing rubber ring and smooth inner wall can ensure that the medium is pollution-free and the sampling is convenient.
  • 【Precision Construction】The sampling valve consists of a simple valve, a handle and a diaphragm. The rubber diaphragm on the valve stem is used as a tension plug when obtaining a sample of the medium in the pipeline or equipment, which is convenient to use.
  • 【Widely Used】Our grab valve is suitable for industrial fields of dairy products, cosmetics, food, pharmacy, beer, chemical, petroleum, metallurgy, water heating, food, pharmaceutical, etc..
  • 【Specifications】Surface Finishing: Mirror polish--Pressure: Normal pressure--Connection Type: Fast clamp connection--Ferrule Size: 50.5mm/2in.
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ... relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule..
  • 【Great Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if the....
Check Stock

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

Baomain AWG 4 / 25mm² Long: 20mm/0.79'' Wire Copper Crimp Connector Non Insulated Ferrule Pin Cord End Terminal EN25-20 Pack of 50

  • [ What You Get ]: 100pcs high-quality nylon ferrule connectors copper cord pin end terminals connectors.
  • [ Wire Range ]: 25mm², 4 AWG, Needle length: 16 mm (0.63in), Brown wire ferrules terminals.
  • [ Material ]: Premium Copper (not brass), Tin Plated + Nylon Insulation.
  • [ Security ]: ROHS,ISO9001:2008,SGS,CE,and UL Approved. Our wire ferrule terminals are used molding process to strengthen the adhesive of copper parts and insulation.
  • [ Widely Applications ]: These wire ferrule connectors are widely used in car audio equipment, power distribution cabinets, speakers, and household appliances, other electronic equipment, etc..
Check Stock

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover ( 4' Tube OD )

  • Tube OD: 4 Inch, Ferrule Size: 102MM, Fits 4 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover (1.5\ Tube OD)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

DERNORD 2 Pack 1.5 Inch Tri Clamp Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover 1.5 Tri Clamp Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

Rhinox Stainless Steel Needle Valve, Accurate CO2 Regulation in Solenoid Fish Tanks, Co2 Adjustment Valve, Used with Rhinox C02 Diffuser Set

  • Required To Regulate Co2 Flow Accurately — In order to properly monitor and adjust the flow of CO2 in your fish tank or aquatic plant environment, a CO2 diffuser set is necessary. An essential part of any functioning diffuser setup is a dependable adjustment valve. The Rhinox CO2 Needle Valve regulates the amount of CO2 that should be released into your aquarium water..
  • For Optimal Development Of Inhabitants — All plants undergo a photosynthesis process that requires CO2 which they convert into oxygen. Your fish, shrimp, and other aquatic pets need to inhale this oxygen in order to survive and also exhale the carbon dioxide. Monitoring and regulating the amount of CO2 in your aquarium is essential to growing happy aquatic plants and pets..
  • Durable Stainless Steel Interior With Aluminum Alloy — this valve is constructed with high-quality, reliable stainless steel and aluminum alloy. The Aquarium C02 Regulator Needle Valve is lightweight and easy to operate. The precise structure of the needle valve features a special metal grinded surface and finely detailed threading for secure closure..
  • Quick & Easy To Setup And Install — Ergonomically designed, the CO2 regulator valve quickly and easily installs into your CO2 diffuser set without the use of an....
Check Stock

DC 24V 1.5\/Φ38 Port Motorized Butterfly Valve, 304 Stainless Steel Tri Clamp GDAE10 for Food, Pharmaceutical, Beverage, Cosmetics, Sanitary 8W

  • ...y to rotate 90° from fully open to fully closed. Control mode: single-acting, automatic return, You can perform local control and remote control, saving human resources and time to a large extent..
  • 【ACCURATE PRODUCT PARAMETER】 - The outer diameter of the sanitary pneumatic valve is 2 in / 51 mm, the size of the ferrule is 2.5 in / 64 mm. Our butterfly valve adopts a disc-shaped butterfly plate, which can better control the flow of liquid..
  • 【EXCELLENT & STABLE PERFORMANCE】 - Applicable temperature: ≤176 °F.
  • Environment temperature: 14 °F to 176 °F.
  • Sterilization temperature can reach to 392 °F. Air supply pressure: 5bar-8bar. Maximum pressure 1.6Mp. Our pneumatic butterfly valve is more adaptable than other models on the market..
  • 【APPLICABLE MEDIUM】 - Our tri-clamp butterfly valve is simple in structure, compact in body, light in weight, and made into a large diameter. Applicable media: water, oil, air.
  • widely used in food, pharmacy, beer beverage, biological engineering, mechanical equipment, and other fields..
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator Mini DC Solenid and Diffuser for Aquarium Plants Tanks

  • PROFESSIONAL FULL CO2 DIY KIT! A complete system in 2.5L size bottle, that includes SUS304 stainless bottle, regulator, Mini DC solenoid, precision needle valve, CO2 Tubing, CO2 Diffuser and easy adjustable bubble counter.
  • SAFE! The bottle body is made of 1.5mm thick SUS304 stainless steel (25% thicker than normal 1.2mm bottle). It can sustain pressure up to 80kg/cm2(or 1137 PSI). Safety valve will open automatically when the inside pressure exceeds the safety threshold.
  • NEEDLE VALVE WITH BUBBLE COUNTER! High precision, aquarium specific needle valve provides accurate fine-tuning. Steady 1 bps is achievable. Bubble counter with check valve built-in. It stops water from back flowing into your CO2 tank (protects your CO2 tanks from rust and corrosion).
  • 12V DC SOLENOID INCLUDED! Having the solenoid on a timer, you can specify when you want CO2 injection ON and for how long.
  • ATTENTIONS: Citric acid and sodium bicarbonate NOT included.
Check Stock

YASI Bicycle Presta Schrader Valve Adaptor, 16PCS Brass Bike Pump Adapters, Ball Pump Needle, Balloon Inflatable Toys Nozzle Inflator Adapter, Air Pump Accessories for Standard Pump or Air Compressor

  • 【Complete Bike Valve Adapter】A complete bike tire presta and scharder valve adaptors, suitable for Dunlop valve, Presta valve, Schrader valve. Make your bicycles, motorcycles or automobiles pumping much easier..
  • 【16PCS Valve Adaptor Kit】YASI brass valve pump adapter kit included: 4 x DV/SV valve adapters, 2 x AV valve adapters, 2 x SV valve adapters, 2 x Ball pump needle, 2 x solid brass tapered inflatable nozzles and 4 x premium ABS tapered inflatable nozzles..
  • 【Ball Needle & Inflatable Nozzle】2 ball needles and 3 kinds of tapered inflatable nozzles, great for most kinds of sport balls likes basketball, football, volleyball, rugby, yoga ball and swim ring, balloon or other inflatable toys..
  • 【Premium Materials】All of these valve adapters are made of pure solid brass & premium ABS plastic, corrosion resistant with standard screw threads, strong and durable for more long time of use..
  • 【Daily Tool for Family】Easy to use and eco-friendly, kids also can easy to use the plastic tapered nozzle for inflatable toys and balloon. It’s a best choice for bike pumping, sport balls and other inflatable equipment..
Check Stock