Categories

Best Ffs Machines

CONFAST 3/8\ Lag Shield Anchor Long (12 per Box)

  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
  • Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Ducati Red Line Full Face Helmet Large 981040225

  • Hyper Ridge is a reinforcement band that circles the bottom of the shell adding strength and lowering the helmet’s centre of gravity. Flares out for....
  • Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad....
  • Holders. Covers the visor mechanism, while ensuring maximum shell strength and a smooth dispersal of impact energy without deep recesses in the shell....
  • Racing closure with D-ring fastening, with button to secure the strap Dual Intake. Designed for increased airflow and lower noise level, guiding....
  • FFS (Free Flow System). Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air Front Duct,....
Check Stock

uxcell 10Pcs 9mm-15mm Grip Range Toggle Hollow-Wall Anchor Screw Eye Assortment

  • Wedge anchor provides a secure hold in solid masonry and uncracked concrete.
  • Anchor consists of a 304 stainless steel body, washer, nut, and clip to provide more corrosion resistance than galvanized or zinc-plated steel anchors.
  • Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code.
  • Ultimate tensile strength is 2,000 lb. at 1-1/4" embedment depth in 4,000-psi concrete with a static load.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

iFJF Fuel Filter Water Separator set for Dodge Ram 6.7L 2500 3500 4500 5500 6.7L Turbo Diesel Engines 68197867AA 68157291AA

  • Fitment:2013-2017 Dodge Ram 2500, 3500, 4500, 5500 6.7L Turbo Diesel Engines.
  • Part Number:68157291AA,68065608AA,680616344AA,68197867AA,68197867AB,MO608,DF99085 WF10112 FF1279 BF46031,MO867,L6806F,33255,DF401-AD.
  • Interchange # WF10255NP FF1199 PF9870 FS53000 FFS20089 PTC GF401EX Fram, FS43255, CS11037 , 4947561.
  • Protecting the fuel system and the engine from harmful particles, helps to prolong the life of your vehicle. Ensure dependable and trouble-free performance with a Fuel Filter.
Check Stock

Ducati Corse SBK 3 Helmet - Black - Size Large

  • Exterior : SFL (Super fiber Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard fiber’ although it actually is Super fiber. Super fiber provides more comfort than other shell materials, yet is still strong and lightweight. / Ergonomic shape. The natural shape of the outer shell lends the Arai helmets a more homogeneous look, ensures greater sealing and better fit on the head, for improved comfort and wearability and minimized turbulence..
  • Interior : Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure. / Central liner is thinner.
  • Visor : VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model.
  • Features : FFS (Free Flow System). Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. / Spaces for speakers / Front Duct, Rear Ducts, side ducts, Browvents, Chinvent.
Check Stock

Ducati Corse SBK 3 Helmet - Red - Size Medium

  • Exterior : SFL (Super fiber Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard fiber’ although it actually is Super fiber. Super fiber provides more comfort than other shell materials, yet is still strong and lightweight. / Ergonomic shape. The natural shape of the outer shell lends the Arai helmets a more homogeneous look, ensures greater sealing and better fit on the head, for improved comfort and wearability and minimized turbulence..
  • Interior : Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure. / Central liner is thinner.
  • Visor : VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model.
  • Features : FFS (Free Flow System). Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. / Spaces for speakers / Front Duct, Rear Ducts, side ducts, Browvents, Chinvent.
Check Stock

Wej-It Nail-It DN1412 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 1/4 Diameter 1-1/2 Length Pack Of 100

  • Drive anchor provides a secure hold in concrete, block, brick, and stone.
  • Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material.
  • Meets Fed. Spec. GSA FFS-325 Group V, Type 2, Class 2 specifications.
  • Ultimate tensile strength for a static load is 800 lb. in 3,000-psi unreinforced stone aggregate concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

GeChic 1102H 11.6 inch FHD 1080p Built-in Battery Portable Monitor with HDMI & VGA Video inputs, USB Powered, Plug&Play, Ultralight and Slim, Built-in Speakers, Rear Docking

  • FHD MINI PORTABLE MONITOR 11 6” full HD 1920x1080 (16 7M colors) with HDMI VGA video inputs USB powered.
  • BUILT-IN BATTERY LASTING 5 HOURS equipped with a 6900mah lithium polymer battery which can last the use up to 5 hours.
  • REAR DOCK PORT EXPANSION provides you the connectivity on the back side of monitor and keep your total solution simpler.
  • PHOTOGRAPHER’S BEST WORKMATE light-weighted 590g extra-slim 11mm with high-end FFS panel for wide viewing angles.
  • PLUG & PLAY / SMART COVER STAND with unique cover lock.
Check Stock

Kasa Smart Bulb Dimmable Color Changing Light Bulb Work with Alexa and Google Home 1000 Lumens CRI 88+ A19 11W Amazon CFH&FFS 2.4Ghz WiFi only No Hub Required 2-Year Warranty 1-Pack KL135

  • 【Multicolor & Auto White】Dimmable 16 million colors and 1000 lumens warm to cool whites(2500K-6500K). Set your bulb to automatically adjust its....
  • 【Voice & App Control】Get hands-free control of your lights with your voice via Amazon Alexa or Google Assistant. Perfect for times when your hands....
  • 【Energy Monitoring & Scheduling】Monitor real-time energy usage. Drive down energy consumption without losing quality (60 W equivalent). Use timer....
  • 【Trusted & Reliable】Kasa is trusted by over 7 Million users. UL certified for safety use. 2-year warranty. Require 2.4GHz Wi-Fi network....
  • 【FFS Support】With Alexa‘s Frustration-Free Setup, setting up TP-Link’s smart home devices is as Simple as Plugging Them In.  You can power on....
Check Stock

Ducati Red Line Full Face Helmet (X-Large) 981040226

  • ...eplacing the shield is easier than ever.
  • Racing closure with D-ring fastening, with button to secure the strap Dual Intake. Designed for increased airflow and lower noise level, guiding fresh, cool air into the interior One-piece rear exhaust. Extracts more hot air from the helmets interior and improves aerodynamics.
  • FFS (Free Flow System). Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air Front Duct, Rear Ducts, side ducts, Browvents, Chinvent Large operating knobs. Large buttons for convenient operation, even with gloves on.
Check Stock

Ballscrew Nut Mount, 1 pcs DSG25H Ballscrew Nut Housing Seat Mount Bracket Holder for SFU2505 / SFU2510 Bolt Ballscrew Nut Holder

  • This ballscrew nut bracket is adopted of high quality aluminum material, sturdy and durable.
  • This ballscrew nut housing seat fits for SFU2505 / SFU2510 ball nut.
  • Wide application scope, suitable for lathes, grinding machines, milling machines, drilling machines, integrated processing machines, EDM machines, boring machines, wire cutting machines, precision measuring instruments, woodworking machines, handling mac.
  • As mechanical ballscrew parts, convenient to replace the broken one.
Check Stock

OEM Steaming Whisk for Aerrocino Plus Milk Frother

  • Highly Effective at an Excellent Value: Powerful and effective yet gentle on the machine, our descaler is safe for you and the environment and will restore the performance of your machine. We meet or exceed the efficacy of other similar descalers!.
  • Custom-formulated, Universal Formula: Not just an ideal Keurig descaling solution - it's also compatible with all single-use coffee & espresso machines, incl. Nespresso, Delonghi, Hamilton Beach, Braun, Bunn, Cuisinart, Tassimo, Krups, Saeco & more!.
  • Improves Taste & Preserves Your Machine: Regularly using a coffee descaler / Keurig descaler eliminates limescale / other hard water mineral deposits and prevents corrosion, significantly extending your machine's lifespan and enhancing taste.
  • Suitable for All Types of Machines: Suitable for cleaning automatic machines, manual machines, pod / capsule / K cup machines, filter machines, commercial machines, cappucino machines, kettles and electric water heaters.
  • Proudly Made in the USA! Two bottles per pack, two uses per bottle (4 Total Uses). Descale every 2-3 months for best results.
Check Stock

Led Holder, Reliable LightEmitting Diode Holder, Fire‑Proof Led Light For Protecting Led Light

  • Meanwhile, Such Ball Screw Nut Bracket Is Suitable For Sfu2005 / Sfu2010 Ball Nut..
  • The Ball Screw Nut Bracket Is Made Of HighQuality Aluminum Alloy Material, Which Is Durable And Securely Locked..
  • Wide Range Of Application Helps Ball Nut Bracket Suitable For Lathes, Grinders, Milling Machines, Drilling Machines, Comprehensive Processing Machines And Edm Machines..
  • Also, Such Cnc Ball Parts Can Be Fit For Boring Machines, Wire Cutting Machines, Accuracy Measuring Instruments, Woodworking Machinery, Loading And Unloading Machines And Transportation Equipment..
  • Entitled With Practical Adoptability, Screw Nut Bracket'S High Quality Can Keep Its High Performance For A Long Time..
Check Stock