Categories

Best Fiber Optic Splice Case

Kicking Off San Diego

  • ...e front sight aperture to adjust sight elevation to get the best visual targeting effect.
  • rotating the rear sight knob to move the sight wintage aperture left or right.
  • when the sights are not needed, just flip down the folding sights. Convenient to use in outdoor sports and recreation activities.
  • 【Light & Durable Fiber Optics Sight】: Polymer fiber optic front and backup sights, light in weight and portable for you to carry.
  • solid and durable construction, designed to increase sight steadiness and accuracy as much as possible while sparing your problem of iron corrosion.
  • 【Notice & Guarantee】: Please be careful when install and use these flipup sights, avoid hurting your hands.
  • these sights are compatible with Picatinny rails in specs.
  • you will receive a case within the package includes 1*front sight with red dot,1*backup sight with green dots, and 1*Allen key wrench accessory.
  • any suggestions and problems with these fiber optic flip up sights, please let us know, we will provide you with satisfactory solutions.
Check Stock

Fiber Visual Fault Locator 30mW 30KM, VFL Fiber Optic Cable Tester Meter, Red Light Pen Tester Adapt LC/FC/SC/ST Interface, Fiber Network Cable Test Kit Fiber Light Source Testers(Aluminum)

  • 【Accurate Identification】This visual fault locator can easily and accurately detect and locate fiber optic breaks, poor connections, bending or cracking. It can operate either in CW or Pulsed mode. VFL will emit a 650nm red light for fiber tracing and locating, breaks or faults will refract the light in the fiber..
  • 【Excellent Functions】The fiber tester multiple functions include constant output power, lower battery warning, long battery life, and long-distance detection. Fiber routing and continuity checking efficiently, creating a bright glow around the faulty area..
  • 【Wide Application】Universal 2.5mm connector designed for LC, ST, SC, FC interferes both in the circle and square shape of different fiber optic cables, test for both single-mode and multi-mode cables. Apply To: Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
  • 【Detection Distance】This visual fault locator has a strong light source output power of 30mW, constant output power the strong red light goes 20-30 kilometers far in fiber optic cable, high effective power circuits provide stable power, continuous-wave and pulsed ....
Check Stock

Fiber Optic Wands (Box of 48) - Fiber Optic Wand with 3 Light Modes (White)

  • White Fiber Optic Wands - Bulk Box of 48 Fiber Optic Wands.
  • WHITE FIBER OPTICS: Elegant white glowing fiber optic strands make these fiber optic wands popular for wedding send-offs, anniversary celebrations and white dress events. These Fiber Optic Light Sticks are 13 1/2 Inches in length. This package includes 48 bright fiber optic light stick wands..
  • 3 LIGHT MODES: Each White Fiber Optic Wand has 3 different light modes that include Steady Light Mode, Fast Flashing Mode and a Slower Flashing Mode..
  • BATTERIES INCLUDED: White Glowing Fiber Optic Wands each come with pre-installed batteries and are ready to go right from the package. Simply remove the battery protection tab and press the button to turn the White Fiber Optic Wand on..
  • USES: Fiber optic wands for Wedding Send Off, LED Sparkle Sticks, Festivals, Christmas Party Light Wands, New Years Glow Wands, Concerts, Sporting Events, Glow Party Light Sticks and Entertainment. Fantastic for Glow Party Celebrations and as light up sparkler glow wands for wedding send off..
Check Stock

Fiber Optic Jacket Stripper Coaxial Cable Stripping Cutter Tool Cable Cutter Crimper 45-163 + 45-162

  • ADJUSTABLE BLADES - This fiber optic buffer tube stripper has adjustable blades that you can set for any depth to ensure nick-free jacket entry into fiber optic buffer tubes.
  • EASY TO USE - This fiber optic stripping tool provides a comfortable and secure grip that helps make the fiber optic stripping process easy and efficient.
  • FIBER OPTIC STRIPPER - CATV UTP/STP Fiber optic stripper used for stripping simplex fiber and a variety of fiber optic cable. 45-162: for (0-1/8") / (0-3.2mm) Coaxial Cable, 45-163: for (1/8-7/32") / (3.2mm - 5.6mm) Coaxial Cable..
  • WIDELY APPLICABLE - Fiber optic tools can also be used to screen twisted pair cable, Twisted stranded cable, CATV cable, CB cable, SO, SJ, SJT and other types of flexible power cord.
  • UNIQUE DESIGN - 45-162 / 163 coaxial stripper is easy to carry and use. It is very suitable for family or daily use..
Check Stock

RTMGOB Flip Up Sights - Fiber Optic Red Green Dot Sights Folding Polymer Sights for Picatinny Rail Adjustable Front and Backup Sights Set (Black)

  • ...e front sight aperture to adjust sight elevation to get the best visual targeting effect.
  • rotating the rear sight knob to move the sight wintage aperture left or right.
  • when the sights are not needed, just flip down the folding sights. Convenient to use in outdoor sports and recreation activities.
  • 【Light & Durable Fiber Optics Sight】: Polymer fiber optic front and backup sights, light in weight and portable for you to carry.
  • solid and durable construction, designed to increase sight steadiness and accuracy as much as possible while sparing your problem of iron corrosion.
  • 【Notice & Guarantee】: Please be careful when install and use these flipup sights, avoid hurting your hands.
  • these sights are compatible with Picatinny rails in specs.
  • you will receive a case within the package includes 1*front sight with red dot,1*backup sight with green dots, and 1*Allen key wrench accessory.
  • any suggestions and problems with these fiber optic flip up sights, please let us know, we will provide you with satisfactory solutions.
Check Stock

FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves for SUMITOMO with 36000 Cleaves and Coating Diameter: 250μm - 900μm 12 Position Blade Cold Connection Tools Fiber Equipment Used in FTTH

  • FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves Used in FTTH, Applicable fibers: Single-Mode or Multimode Silica optical fiber.★ Cold Connection Tool Equipment Bare fiber diameter:125um,Coating diameter:250-900um.
  • Cleaving angle: 0.5-0.8 degrees with single fiber..
  • Replicable Blade: Contained 16 Position Rotatable blades, Blade life: Provides approximately 48000 times (100*16*3) cleaves.★ Durability & Compact body: High hardness aluminum alloy materials, Lightweight and rugged design for longer life and increased durability..
  • Scientific Design: The fiber cleaver Built-In Fiber Holder can hold 250μm and 900μm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal..
  • High Precise Cleaving: Provides a cleave with a cutting angle of less than 0.5°for optimal fiber preparation for fusion splicing, Coating Diameter: 250um ~ 900um buffer fiber. Large & small adjustable knife, easy to operate. Non-slip bottom,easy to use..
  • Wide Application: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice..
Check Stock

Winzwon Car Led Lights Interior 4 Pcs 48 Led Strip Light for Car with USB Port APP Control for iPhone Android Smart Phone Infinite DIY Colors Music Microphone Control

  • ▸【10 Meters (32.81ft) Optic Fiber Band Car Ambient Lights Interior】 Sewing edge: 3.0mm. Led Power: 1W (DC 12V)..
  • ▸【Flexible & Cuttable Optic Fiber Cable】 With 0.5mm thickness fin easily fix the fiber optic into the gag of door panel. With 1mm clip makes the fiber optic coincide with the gap of door panel, firm, not easily fall off. The optic fiber pipe can be cut for your needs..
  • ▸【Simple Fiber Optic Installation】 Step 1: Using the scraper to fix the fiber optic into the gap of door panel. Step 2: When cutting, make sure that 12mm is fully inserted into the light source, and then cut the fin. Step 3: Fix it with a screwdriver, take care not to tighten it, otherwise it will not transmit light..
  • ▸【Usage】 For all kinds led fiber optic illumination engine and decoration such as optical fiber hanging lamps, ar interior decoration, Artistic adornment in graphical and 3D artistic design.
  • Interior fiber optic light decoration of KTV, pubs, coffee houses, hotels and restaurants and so on..
  • ▸【Safe to Use】 IP68 Waterproof, Environmental protection, low power consumption, high brightness, extremely low heat, touchable and safe for children. Package included: only 6mts optic fiber (not including the LED light sources)..
Check Stock

GESD Visual Fault Locator 30km Fiber Optic Cable Tester Meter Red Light VFL with 2.5mm Universal Connector for FC/SC/ST Adapter Pen for CATV Telecommunications Engineering Maintenance

  • Practical Design & Excellent FunctionPortable VFL Pen:Small size lightweight type is easy to field testCrash-proof & Dust-proof: Metal pen body With low battery detection indicator,This Visual Fault Locator Can Operates Either In CW Or Pulsed Mode,Fiber optic vfl lighting 2Hz glint or continuous output..
  • Accurate IdentificationEasily and accurately detect locate fiber breaks,poor connections,bending or crackingVisual Fault Locator will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
  • 30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output power Design with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
  • Wide ApplicationUniversal 2.5mm connector designed for ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
Check Stock

FTTH Fiber Optic Tool Kit 18 in 1 with Fiber Optical Power Meter and 1KMVisual Fault Locator and Cable Cutter Stripper Tool 6C Fiber Cleave Multi-Function Equipment Tool

  • aluminum alloy visual fault locator fiber optic cable tester meter for CATV test Universally connector for test different ST,SC,FC interfaces.
  • Handheld fiber optical power meter FC SC cable tester, Wavelength range: 800~1700,Power measurement range: -70~+10.
  • 6C High Precision Fiber Cleaver is an instrument for high precision fiber cutting.It is a multi-purpose optical fiber cutter, the product uses the 16 cutting points and has a longer service life ..
  • FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250 coating of 125 fiber optic coating of fiber optic coating of fiber optic.
Check Stock

Visual Fault Locator 30KM, VFL Fiber Optic Light Source Tester 30mW, Red Light Pen Equipment for 2.5mm Universal Connector, FC/SC/ST/LC Adapter for CATV Telecommunications, Fiber Network Cable Test

  • Practical Design & Excellent FunctionPortable VFL Pen:Small size lightweight type is easy to field testCrash-proof & Dust-proof:Metal pen body with low battery detection indicator,This VFL light Can Operates Either In CW Or Pulsed Mode,Fiber optic vfl lighting 2Hz glint or continuous output..
  • Accurate IdentificationAccurately detect and locate fiber breaks,poor connections,bending or crackingVisual Fault Locator will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
  • 30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output powerDesign with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
  • Wide ApplicationUniversal 2.5mm connector designed for LC,ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ...uilt-in 8G TF card memory, can store a large amount of curve data..
  • ✅【Network & Camera Test】WANLUTECH MT-8000 is not only an OTDR tester, but also a CCTV tester.It can measure the optical fiber length, transmission attenuation of optical fiber, attenuation of the splice, and failure location, etc. As well, built in camera tester for maintenance and installation of IP analog, HD coaxial cameras.It also comes with a digital cable tracer.Support searching for BNC cables, network cables and telephone cables from a mess of cables..
Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

Ethernet Cable Fiber Optic

  • The Residential Solution - Our SC APC fiber optic ethernet cable extender is the Fiber cable of choice for Fiber to the home Networks.
  • Compatible with - Verizon Fios, ATT internet cable, Google Fiber, Century link, UniFi Dream machine and more FTTH Fiber optic networks & hardware.
  • 50% Thicker Jacket - Our 3mm cable is more robust than the standard network fiber optic cable which is 2mm. This SC APC Singlemode fiberoptic cable meets all UL, cUL, IEC & RoHS.
  • Fiber Optic Connector Included - SCAPC Adapter included with each cable for easy extension or connection from incoming PON fiber cable.
  • Save Money - Don’t spend $100+ on expensive single mode sc replacement cable installations when you can DIY for a fraction of the cost.
Check Stock