Categories

Best Fiber Sfp Modules Lc

1.25G/2.5Gbps Two Ports SFP OEO Mode Converter, SFP Repeater (without Transceiver)

  • [How to Use] Singlemode and Multimode converted by transceivers, Dual Fiber and Single Fiber converted by transceivers, SFP to CWDM SFP converter..
  • [Multirate] Support for SFP transceivers with data rates from 100Mbps to 2.5Gbps through two SFP slots. (Important: Use matching speed modules in SFP1 and SFP2 only.).
  • [Protocol Transparent] Compliant with all protocols, as long as the data rate is correct..
  • [Easy Installation and Use] Modulization configuration design, support hot-swappable, plug and play. LED indicators for P1, P2, POWER can dynamic feedback link connection state and fault detection to easily monitor network status..
  • [Warranty] 3-year warranty and lifetime technical support..
Check Stock

StarTech.com Singlemode (SM) LC Fiber Media Converter for 1Gbe Network - 10km - Gigabit Ethernet - 1310nm - with SFP Transceiver (ET91000SM10)

  • ETHERNET OVER FIBER EXTENSION: Use this full / half duplex fiber media converter to convert and extend a Gigabit Ethernet connection up to 10km (6.2mi) using singlemode LC fiber cable..
  • INCLUDES SFP: For added convenience, this IT-grade network fiber media converter includes an SFP transceiver (mini gbic), enabling an 1310nm LC single mode Gigabit fiber connection..
  • MAXIMUM DURABILITY: Built to withstand harsh environments, this rugged media converter has a durable steel housing, and has an operating temperature range of 0°C-50°C (32°F-122°F)..
Check Stock

MikroTik Cloud Core Router CCR1009-7G-1C-1S+

  • CCR1009-7G-1C-1S+ Supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
  • A SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you.
  • The unit is equipped with dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically).
  • Unit comes with the 1U rackmount case and supports a Smart card, to store your private key for use in all features that support Certificate based authentication.
  • Comes with 1U rackmount, 7x Gigabit Ethernet, 1x Combo port (SFP or Gigabit Ethernet), 1xSFP+ cage, 9 cores x 1.2GHz CPU, 2GB RAM, LCD panel, Dual Power supplies, SmartCard slot, RouterOS L6.
Check Stock

StarTech.com PCI Express Gigabit Ethernet Fiber Network Card w/Open SFP - PCIe GbE SFP Network Card Adapter NIC - Fiber Optic SFP Adapter (PEX1000SFP2)

  • Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice.
  • PCIe GbE Fiber Network Card with Open SFP Slot.
  • Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.
  • No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.
  • Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design.
  • Compatible with most Gigabit SFP modules.
  • Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX.
  • Includes low-profile/half-height installation bracket.
  • Compliant with IEEE802.3z 1000Base-SX/LX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control, RFC 1157 SNMP v1.
Check Stock

Parts Express Cable Pants 10mm 2-Conductor, Black (Pack of 10)

  • 【OM3 LC-LC Multimode Duplex Fiber Patch Cable】 RamboCables 3m/10ft OM3 LC to LC Multimode Duplex Fiber Patch Cord is constructed wtih 50/125μm high rated fiber cladding, 850/1300nm Wavelength, 2.0mm fiber cable diameter and environmentally friendly LSZH fiber jacket. This international industry standard OM3 lc/ lc duplex multimode fiber optic cable ensures a more stable and efficient transmission for your network..
  • 【Wide Usage】OM3 MMF is the preferred fiber specification for 10G Ethernet connections. OM3 LC to LC Multimode Duplex Fiber patch cords is specially designed for connecting 10G SR, 40G BIDI SR, QSFP+, SFP+ transceivers etc, ideal for 10G/40G/100G Ethernet connections and RamboCables OM3 LC-LC optic fiber patch cables help saving more space for your high density cabling in data centers, enterprise networks, telecom room, server farms, cloud storage networks, and any places patch cables are needed..
  • 【Transmission Distance】OM3 Multimode LC to LC Fiber Patch Cables has a 2000 MHz·km @850nm bandwidth, allows for 10Gb Ethernet transmission distance of 300Meters at 850nm wavelength.
  • 40Gb Ethernet transmission distance of 240Meters at 850nm wavelength.
  • 100Gb Ethernet transmission distance of 100Meters at 850nm wavelength..
Check Stock

CableRack 1 Meter LC to LC Single Mode Fiber 9/125 Fiber Patch Cable (5-Pack)

  • Premium quality LC to LC single mode fiber patch cable for connecting singlemode optical networking devices in datacenter applications. Fiber patch cable single mode is immune to electrical interference and provides Ethernet connectivity up to 10GB. Single mode fiber cable is commonly used between LX and LH SFP optics for both 1GB and 10GB interconnects..
  • Only Corning glass is used in CableRack brand singlemode fiber LC to LC fiber jumpers. You’ll find other sellers mistakenly referring to this cable at OS2, however this cable is actually OS1. OS2 is reserved for loose tube applications over bridges and between buildings. OS1 is for shorter lengths between network devices. The glass fiber insde OS1 and OS2, however is identical..
  • All CableRack fiber optic patch cable LC to LC are fully tested and each package includes the output test results including insertion and DB loss, so you be sure your LC singlemode patch cable meets the highest quality standards. We carry LC single mode patch cables in a varienty of lengths and connector options in our Amazon store. Simply click on our brand name above to view all available products..
  • Single mode LC to LC fiber patch cable solutions are critical to high speed network solutions in the datacenter. These ....
Check Stock

MokerLink 8 Port 10Gbps SFP+ Switch, Support 1G SFP and 10G SFP+, 160Gbps Bandwidth, Fanless Unmanaged Plug and Play Ethernet Switch

  • 10 Gigabit SFP+: 8 x 10Gbps SFP+ ports, enable high-bandwidth connected, auto-adaptive 1G/2.5G/10G optical fiber module, wider rate range.
  • 160Gbps Bandwidth: switching capacity is 160Gbps, all ports can achieve non-blocking 10G line speed forwarding.
  • Open SFP: Support standard SFP interface optical module, no encryption, such as multi mode, single mode, SFP to RJ45 Modules.***No include SFP module***.
  • Plug and Play: Unmanaged simple setup, with no software to install or configuration needed. LED indicators can clearly show the status and rate of the port.
  • Widely Used: Metal case, fanless design, quiet and stable operation, suitable for high-speed and long-distance fiber transmission.
Check Stock

Mikrotik RB951G-2HND 5-Port Gigabit Wireless AP 1000mW

  • No switch-chip - the device features only fully independent Ethernet ports each with a direct connection to the CPU.
  • Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you.
  • 100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
  • More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
  • This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent.
Check Stock

KH Industries CPCR-16/5-25FT Pendant Cable with Internal Strain Relief, PVC Jacket, 5 Conductor, 16 AWG, 25' Length, Yellow

  • 【OM3 LC-LC Multimode Duplex Fiber Patch Cable】 RamboCables 0.5m/1.6ft OM3 LC to LC Multimode Duplex Fiber Patch Cord is constructed wtih 50/125μm high rated fiber cladding, 850/1300nm Wavelength, 2.0mm fiber cable diameter and environmentally friendly LSZH fiber jacket. This international industry standard OM3 lc/ lc duplex multimode fiber optic cable ensures a more stable and efficient transmission for your network..
  • 【Wide Usage】OM3 MMF is the preferred fiber specification for 10G Ethernet connections. OM3 LC to LC Multimode Duplex Fiber patch cords is specially designed for connecting 10G SR, 40G BIDI SR, QSFP+, SFP+ transceivers etc, ideal for 10G/40G/100G Ethernet connections and RamboCables OM3 LC-LC optic fiber patch cables help saving more space for your high density cabling in data centers, enterprise networks, telecom room, server farms, cloud storage networks, and any places patch cables are needed..
  • 【Transmission Distance】OM3 Multimode LC to LC Fiber Patch Cables has a 2000 MHz·km @850nm bandwidth, allows for 10Gb Ethernet transmission distance of 300Meters at 850nm wavelength.
  • 40Gb Ethernet transmission distance of 240Meters at 850nm wavelength.
  • 100Gb Ethernet transmission distance of 100Meters at 850nm wavelength..
Check Stock

StarTech.com Gigabit Ethernet Fiber Media Converter with Open SFP Slot - Fiber to Ethernet Converter - Gigabit Ethernet Media Converter (ET91000SFP2)

  • Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis.
  • Open SFP slot supports MSA-Compliant Single / Multi-Mode Gigabit SFPs at varying distances.
  • Advanced features include Link-loss forwarding, remote monitor status, two frame lengths.
  • Convert and extend a Gigabit Ethernet connection over fiber using the Gigabit SFP of your choice.
  • Compatible with NETGEAR ProSAFE JGS524NA / Comparable to ET91000LC2.
  • Fiber to Ethernet Converter w/ Open SFP Slot / Multi / Single-Mode Fiber Converter.
  • 1000 Mbps Gigabit Ethernet Media Converter / Fiber Optic Converter / Ethernet Over Fiber-1000Base-SX.
  • Extend/Bridge networks over to fiber another building.
Check Stock

RamboCables 2m(6ft) OM4 LC LC Fiber Patch Cables MMF Multimode, Options 0.2m~122m, LC to LC Fiber Optic Cable Duplex, 50/125μm 40G/100G LSZH

  • 【2m/6ft OM4 LC-LC Fiber Patch Cable】 RamboCables OM4 2m/6ft LC to LC fiber patch cable multimode duplex has a 50/125μm high rated fiber cladding, 850/1300nm Wavelength, 2.0mm fiber cable diameter and environmentally friendly LSZH fiber jacket. This high quality 50/125μm OM4 multimode LC to LC fiber patch cables ensure a more stable and efficient network for you..
  • 【Wide Usage】OM4 MMF is the preferred fiber specification for 40G Ethernet connections. OM4 LC to LC Multimode Duplex Fiber patch cords is specially designed for connecting 10G SR, 40G BIDI SR, QSFP+, SFP+ transceivers etc, ideal for 10G/40G/100G Ethernet connections. RamboCables OM4 LC-LC optic fiber patch cables help saving more space for your high density cabling in data centers, enterprise networks, telecom room and any places patch cables are needed..
  • 【Transmission Distance】OM4 LC to LC fiber patch cables have a 4700 MHz·km @850nm bandwidth, allow for 10Gb Ethernet transmission distance of 400Meters at 850nm wavelength.
  • 40Gb Ethernet transmission distance of 350Meters at 850nm wavelength.
  • 100Gb Ethernet transmission distance of 125Meters at 850nm wavelength..
  • 【Why to Choose】OM4 LC to LC multimode fiber optic patch cables are Constructed with LSZH environmentally friendly ....
Check Stock

4Pack 10GBase-SR SFP+ Transceiver SFP Multi-Mode LC Module 10G 850nm MMF up to 300 Meters Compatible with Cisco SFP-10G-SR,Meraki MA-SFP-10GB-SR,Ubiquiti UF-MM-10G,Mikrotik,Netgear,D-Link and More

  • 4 Pack 10GBase-SR SFP to LC Multi Mode Data Rate:10G.
  • Compatible with MSA compliant equipment from Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UF-MM-10G, Mikrotik, D-Link, Huawei, Netgear,....
  • Widely Used: Work with multi-mode fiber connection Connects a network switch, server, or NIC with SFP to a Gigabit fiber channel network with....
  • Durable & Low Power Consumption: Less power usage and low EMI emission design, heat-conducting increases the life of the product, Hot-pluggable with....
  • EASY TO USE: Easy installation, plug and play, fully hot-swapple, Always keep the protective dust plug on the SFP’s optical bores until you are....
Check Stock

TP-Link MC220L | Gigabit SFP to RJ45 Fiber Media Converter | Fiber to Ethernet Converter | Plug and Play | Durable Metal Casing | Versatile Compatibility | Auto-Negotiation | UL Certified

  • 【Convert Fiber to Ethernet】Designed to convert 1000BASE-SX/LX fiber to 1000Base-T copper media or vice versa..
  • 【Versatile Compatibility】Works with both single-mode and multi-mode fiber SFP modules and is fully compatible with 10/100/1000 Base-T Ethernet connections..
  • 【Easy to Use】Plug and play with no software installation or configuration needed..
  • 【Auto-Negotiation Gigabit Connection】Auto-negotiation RJ45 port supports Half-Duplex/Full-Duplex transfer mode and auto-MDI/MDIX..
  • 【Long-Range Transmission】When used with different types of SFP modules, the Hot-Swappable FX Port extends fiber distance up to 12.4miles (20km) for Single-Mode transmission and 1,800 feet (550m) for Multi-Mode transmission..
Check Stock