CEM BX-500 Portable IR Dry-Well Infrared Temperature Calibrators 122 to 932℉(50-500℃

  • The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
  • External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
  • The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
  • The calibrations can be done over a range of 50℃ to 500℃..
  • Temperature display and stability resolution is 0.1 degree..
Check Stock

Hand Operated Pressure and Vacuum Pump Calibrator Only Hand Pump for Calibration Labs Field Calibration and Pressure Transmitter Calibration Model AI-DP1-2200

  • Model: AI-DP1-2200 | Measuring Parameters: Pressure and Vacuum | Model: Hand operated.
  • Vacuum Range: Ambient to -0.9 Kg/Cm² | Pressure Range: Ambient to 30 Kg/Cm² (30 Bar).
  • Weight Approx. 1.5 Kgs. | Material Of Construction: Aluminium and Stainless Steel |.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4").
  • Applications: Field Calibration, Calibration Labs, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Check Stock

Negative Pressure Gauge Calibrator for HVAC, Laboratories, Room Pressure Monitoring Model: ACE PSI-PP1 (Static Pressure Pump Only)

  • Calibrator: Static Pressure Pump Calibrator (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
  • | Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
  • Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
  • Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
  • Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Filter Monitoring, Room Pressure Monitoring, Laboratory..
Check Stock

Pressure and Vacuum Hand Pump Calibrator Pressure and Vacuum Gauges Alongwith Pump for Calibration Labs and Field Calibrations Model AI-DP1-2200

  • Measuring Parameters: Pressure and Vacuum.
  • Vacuum Range: Ambient to -0.9 Kg/Cm² | Pressure Range: Ambient to 30 Kg/Cm² (30 Bar) | Master Gauge ( Vacuum & Pressure) Range: -1 to 25 Bar.
  • Material Of Construction: Aluminium and Stainless Steel | Weight Approx. 1.5 Kgs..
  • Supply Scope: 1 Unit of Calibrator, 1 Unit of Master Gauge (Range: -1 to 25 Bar), 3 Nos Reducers (1/4", 1/2", 3/4"), Instruction Manual and....
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Check Stock

ennoLogic Volt mA Loop Process Calibrator eC380V - 0-20V and 4-20mA Signal Generator Simulator – Portable Precision Volt Millivolt and mA Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, PLC....
  • BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire....
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution) and 0-20V (1mV resolution) with....
  • GENERATE PRECISE TEST VOLTAGES AND CURRENTS for testing loops, transmitters, data logger, meters or any devices that measure 4-20mA currents or sensor....
  • The eC380V Volt/mA calibrator is powered by six AAA batteries (included). The package includes one eC380V calibrator, 6 AAA batteries, carrying case,....
Check Stock

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
  • NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).
Check Stock

PIE 525B Automated T/C & RTD Calibrator 12 RTD & 14 T/C types

  • Automated RTD and Thermocouple Calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert..
  • Easy to use With the PIE 525B you can check and calibrate all your thermocouple and RTD instruments and measure temperature sensors..
  • Take it into the shop, plant or field Carry it without worry - it comes protected with a rubber boot and rugged, low profile switches. Easy to operate even in the dark areas of the plant with the backlit display..
  • Calibrate thermocouple instruments to 0.1 & 0.01 degrees-F & degrees-C The PIE 525B works with the thermocouples you use including types J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Or calibrate from -13.0000 to +80.0000 mV..
  • Calibrate RTD instruments to 0.1 & 0.01 degrees-F & degrees-C Stop carrying around a decade box and RTD resistance tables. The 525B works with the RTDs you use including Platinum 10, 50, 100, 200, 500 & 1000 Ohm (alpha = 3850), Platinum 100 Ohm (alpha = 3902, 3916, 3926), Copper 10 & 50 Ohm, and Nickel 120 Ohm. Or calibrate from 0.000 to 400.000 and 0.00 to 4000.00 Ohms..
Check Stock

TSI Quest (Formerly 3M) eg4-D-AC3 Personal Noise Dosimeter, Dock, and Calibrator

  • Kit Includes: EDGE 4 Dosimeter with 1/4-Inch Microphone Two Windscreens, AC-300 Calibrator, Single Docking Station, Calibrator Adapter, USB Cable, Power Supply and Storage Case.
  • Displays SPL, dose, Lavg, Leq, TWA, maximum level, minimum level, peak level, exposure, and run time… all while in Run mode.
  • Independent selectable thresholds from 70 to 90dB or none, independent exchange rates for each dosimeter (3, 4, or 5 dB), and independent criterion levels from 70 to 90 dB in 1dB increments.
  • Rechargeable lithium polymer battery provides more than 60 hours of run time, and only needs to be replaced every three years.
Check Stock

Ace Instruments Static Pump, DP Pressure Gauge Calibrator for HVAC, Laboratories, Calibration Labs Model: ACE PSI-PP1 (Static Pressure Pump with Master Gauge)

  • Calibrator: Static Pressure Pump (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
  • Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
  • Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
  • Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
  • Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Laboratories, Calibration Labs..
Check Stock

Calibrite ColorChecker Display Pro with Datacolor SpyderCheckr 24 Color Calibrator Bundle (2 Items)

  • Bundle Includes: Calibrite ColorChecker Display Pro and Datacolor SpyderCheckr 24 Color Calibrator.
  • Intuitive All-in-One Design: The ultra-modern ergonomic design incorporates three functions – ambient light measurement, monitor profiling, and projector profiling – into a very sleek, compact and fully integrated device with no parts to misplace.
  • Features of ColorChecker Display Pro: Custom-designed RGB filter set provides accurate color measurements. Optical design allows for high repeatability on the same display and across different display types for more consistent color matching. Rotatable diffuser arm can be used as a stand for tabletop projector profiling, ambient light measurement, and as a cover for instrument optics. Conveniently integrated tripod mount for projector profiling in larger venues.
  • Calibrite ccProfiler Software: The color management software offers the ultimate flexibility and control. Basic mode offers a wizard-driven interface with predefined options for the quickest path to professional on-screen color. Advanced mode offers user-defined options for more sophisticated profiling workflows to deliver the highest quality color results on monitors and projectors, as well as display testing and quality assurance tools.
Check Stock

Portable Electronic Tension Calibrator ABS LCD Digital Display Shakeproof Tennis Badminton String Tool Black

  • High Performance: Electronic tension calibrator with high performance embedded microcomputer as the core, accurate weighing, stable performance, vibration resistance, high practicability..
  • Manufacturing Material: The case of hand held tension calibrator is made of ABS engineering plastic, which is strong and durable, which can effectively prolong its service life..
  • Exquisite Appearance and Portable: Appearance is exquisite and convenient to carry. LCD digital display design, which can know relevant data in a timely and effective manner..
  • Circuit Damage Prevention: If the sign of low power is displayed, please replace the battery in time. If the electronic weighing device is not used for a long time, take out the battery to avoid damage to the circuit due to battery leakage..
  • Unit Conversion: Press the "UNIT" key, and the weighing instrument will perform cycle conversion among the four units of KG, lb, catty, and oz..
Check Stock

Sedremm Gray White Balance Card Tri-Fold Light Reflector, 37x37cm 3 in 1 Focus Board Double Face Foldable 18% Grey/Black/White Balance Reference Card with Carry Pouch for Canon Nikon Sony DSLR

  • This gray white balance card is double sided. One side includes gray, white and black balance cards for digital photography. The 18% gray side works for the exposure correction and white side for white balance setting and the black side is used for "dithered black card" exposure. The other side is Tri-fold silver reflector for instant fill light..
  • This versatile 3-in-1 gray white balance card can be used as a white balance calibrator, light meter calibrator, or a reflector for fill light..
  • This white balance card size is 37x37cm,It can be folded and placed in the carry pouch. Easy to carry. Suitable for studio and location photography. Such as portrait shooting, product shooting, travel video shooting, wedding photo photography etc..
  • Includes 3 in 1 gray/black/white Balance card x 1 and carry bag x 1..
  • We offer one year warranty and life-time after-service, If you meet any problem, Please don't hesitate to contact us..
Check Stock

Sugon T3602 Soldering Station ,240W 2 in 1 Digital Solder Iron Station with 2 JBC Soldering Iron Tips ,212℉-842℉ Adjustable Temperature C/F,Auto Sleep and Calibration Support,Rapid Heating 110V

  • ...cs, small parts, large chips, mobile phone motherboards, and electronic components..
  • 240W soldering station with LCD display, with multiple functions, precise temperature adjustment range 212℉-842℉, ℃/℉, automatic sleep, temperature storage, buzzer, temperature lock, quick-change tip holder, with temperature calibrator and supports temperature calibration..
  • Buy a JBC soldering station to get 1 calibrator, 1 JBC C115 soldering iron tips, 1 JBC C210 soldering iron tips, 1 soldering mat, 1 cleaning ball seat, 1 soldering iron tip repair powder, 1 cleaning copper wire, 1 cleaning sponge..
  • The soldering station has passed FCC, CE, and RoHS certification, and we improve the 12-month warranty service for the soldering station, if you have any questions about our products, please contact us, and we will reply as soon as possible..
Check Stock