Categories

Best Filter Mono Block

American Bass PH-2500.1-MD-V2 Class D Digital Power Car Amplifier

  • 1 ohm stable D class mono-block amplifier, 2500 Watts RMS.
  • Variable subsonic filter: 10Hz to 50Hz at 24dB per octave.
  • Variable low pass filter: 35Hz to 250Hz at 24dB per octave.
  • Two amplifiers linkable connector and selector.
Check Stock

TOPSTRONGGEAR 1 Ohm 800 Watts Class D Full Range Mono Block Amplifier, 1/2/4 Ohm Stable, Remote Subwoofer Control

  • Class D MOSFET Mono Block Power Amplifier.
  • RMS Power at 1 Ohm:1500 Watts，RMS Power at 2 Ohms: 800 Watts，RMS Power at 4 Ohms: 510 Watts.
  • Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • Remote Subwoofer Level Control Included.Variable Bass Boost - Variable Bass Boost 0 to 12dB(50Hz) allows you to adjust the low bass within the boost range to just the way you like it..
  • Warranty -TopstrongGear provides a powerful 1 year Platinum Online Dealer Warranty.
Check Stock

Rockville RV10.2B 1000w Dual 10' Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV10. 2B 1000w Dual 10" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit.
  • Rockville RV10. 2B Dual 10” Bass Enclosure System With matching Mono Block Amplifier. 1000 Watts Peak Power / 350 Watts RMS CEA-2031 Rating. Dual 10” Bass Enclosure System with matching Mono Block Amplifier. Quasi Transmission Line Cabinet Design. Bonded, Stapled and Braced 3/5" MDF Cabinet. Computer Designed, Under-Side Bass Reflex, Aero-Port System..
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: High quality aviation grade tweed carpet. Oversize Rockville Shield Embroidery. Mono, gold-plated push style, speaker terminal. Dual, High-Power, High-Efficiency 10" Subwoofers. Injection Molded, Talc Filled, Brushed Polypropylene Cones.
  • 1200 Watts Peak Power. Power Output: 200 Watts RMS CEA-2006 Power @ 4-ohm and 97dBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20KHz (-3dB). RMS Power: 400 Watts @ 2 ohms. 4 Ohm Mono-Block Class A/B..
  • High Speed MosFET Power Supply with 50 Volt Rail. BiPolar Audio Transistor Output Section. RCA Line Input. RCA Line Output - Full Range. High Level Speaker Line Input. OEM Integration Auto-Start Turn On Circuitry. Dashboard Bass Remote Control with Cable.
Check Stock

American Bass XFL DC 2000 Monoblock 4 Channel Class D 2000 Watt Max Power 180Hz Low Pass Car Audio Amplifier with Bass Boosting Functionality, Black

  • American Bass PH1600MD, 1600 watts Phantom Series Mono Block Class D Car Amplifier Require Fuse.
  • 60 amp x 1 (Not Included) Channel Operation: Mono Installation Required 4 Gauge Power And Ground Wire.
  • Variable subsonic: 10Hz 50Hz variable low Pass filter: 40Hz 220Hz switchable bass Boost: 0Db, 6Db, 12Db input level: 5V 0.2V frequency response: 10Hz 220Hz Dimensions: 5.51"W x 7.24"L x 2.12"H.
  • Peak power handling @ 1 ohm: 1600 watts x 1 channel RMS power handling @ 1 ohms: 800 watts x 1 channel.
Check Stock

PRORECK PR-122M Complete 1500W Dual 12

  • Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit..
  • PRORECK PR-1500.1M Dual 12 Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms..
  • This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound..
  • Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire....
Check Stock

TOPSTRONGGEAR 1 Ohm 1500 Watts Class D Full Range Mono Block Amplifier 1/2/4 Ohm Stable Remote Subwoofer Control Subwoofer Amplifiers

  • Class D MOSFET Mono Block Power Amplifier.
  • Max Power at 1 Ohm:1500 Watts，Max Power at 2 Ohms: 800 Watts，Max Power at 4 Ohms: 510 Watts.
  • Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • Remote Subwoofer Level Control Included.Variable Bass Boost - Variable Bass Boost 0 to 12dB(50Hz) allows you to adjust the low bass within the boost range to just the way you like it..
  • Warranty -TopstrongGear provides a powerful 1 year Platinum Online Dealer Warranty.
Check Stock

Rockville RV12.2B 1200W Dual 12 Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit.
  • Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design..
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers..
  • 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B..
  • 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder.
Check Stock

JL Audio XD1000/1v2 Monoblock Class D 1000W Subwoofer Amplifier

  • 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms) variable low-pass filter (50-500 Hz, 12 or 24dB/octave) switchable subsonic filter (30 Hz, 24 dB/oct).
  • Class D amplifier design with NextD switching amp technology differential-balanced inputs eliminate noise coming from your vehicle's electrical system Advanced Rollback Protection System prevents thermal shut-down speaker- and preamp-level inputs (speaker-level input requires an.
  • preamp outputs auto turn-on via DC offset or signal sensing 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier.
  • no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended 14-3/4"W x 2"H x 7-1/8"D.
Check Stock

Rockville RV8.2A 800 Watt Dual 8\ Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV8.2A Single 8" Bass Enclosure System With matching Mono Block Amplifier.
  • 800 Watts Peak Power / 250 Watts RMS CEA-2031 Rating.
  • Dual 8" Bass Enclosure System with matching Mono Block Amplifier.
  • Quasi Transmission Line Cabinet Design. Fully adjustable low pass crossover: 50Hz - 250Hz.
  • Bonded, Stapled and Braced 3/5" MDF Cabinet.
Check Stock

Parts Express Cast Frame #10-32 Speaker Mounting Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound....
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16....
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
Check Stock

Memphis Audio MJP1222 12" 1500 Watt MOJO Pro Car Audio Subwoofer Bundle MJP1000.1 Car Amplifier Mojo Pro Amp & RWK4CU Complete Amp Installation Wire Kit OFC (3 Items)

  • ... Sub Vented: 4.6 cf, Port Dimensions: 7" x 6" x 23"L in, Tuning Frequency: 36.
  • Features of MJP1000.1: Extruded aluminum Heatsink, 12dB/octave butterworth crossovers, Variable crossovers, 3 EQ boost settings - 0,6,12dB (MJP800.4), Variable EQ bass boost (mono block amps), Strap-able (mono block amps), Bass knob included (mono block amps).
  • Features of RWK4CU: Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables, 4 Gauge Power Amplifier Installation Kit, Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts, Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal, The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems, Strand Count: 1862, BC-5W2 Compliant.
Check Stock

Radial J48 MK2 48V Phantom Power Active Direct Box

  • Active 48-Volt phantom powered direct box -15dB pad 180 degree polarity reverse Merge function to mix 2 signals to mono 80Hz high-pass rumble filter Ground lift Welded I-beam construction Minimal power draw with high rail voltage Will not choke when driven hard Low intermodulation distortion.
  • The J48 is capable of peak transients to 9 volts without choking.
  • The result is lower harmonic distortion, half the inter-modulation distortion and significantly improved dynamics over other DIs.
  • Features include a -15dB pad, 180° polarity reverse, a unique merge function to mix two signals to mono, an 80Hz high-pass rumble filter, and ground lift.
  • It's built to handle the abuse on the road and features a unique welded I-beam construction.
Check Stock

CERRXIAN 3.5mm TS Mono Male to 2 Pin Screw Terminal Female AUX Headphone Replacement Solderless Balum Converter Adapter (2-Pack)

  • One truth about working, you always need the cable or adapter when you don't have in your toolbox. That's why we choose these terminal-block audio connectors. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs..
  • Connecting single wires with open cable heads to your 3.5mm mono jack.With this adapter, you can convert 3.5mm audio interface signals into wires that connect audio signals from 3.5mm mono adapters. Corresponding to the channel terminal block, the wires fixed with screws are more useful, convenient and fast!.
  • Reliable connect, good performance with plastic construction and strain relief..
  • It is more convenient to use more quickly without welding..
Check Stock