Categories

Best Filter Mount Adapter Plate

HumanCentric VESA Mount Adapter Plate for TV Mounts, Convert 75x75 and 100x100 to 200x200 mm VESA Patterns, Includes Hardware Kit, VESA Conversion Plate for 200x200 VESA Mount, VESA Adapter

  • VESA conversion plate kit: This VESA mount conversion adapter plate for TV and screen mounts allows you to convert from one VESA pattern to another to connect VESA mounts and TVs that are otherwise incompatible..
  • Converts common VESA patterns and sizes: The HumanCentric VESA mount adapter can convert to the following VESA pattern sizes: 50 x 50 mm, 75 x 75 mm, 100 x 100 mm, and 200 x 200 mm..
  • Easy installation: Includes a step by step instruction manual for quick installation of both flat and curved TVs and clear instructions on which hardware to use for different mounting scenarios..
  • Connect devices: If your mount, stand, or VESA arm does not have the correct hole patterns to match your device, this adapter plate will allow you to mount it by converting to the standard sizes. For example, you can mount a 200 x 200 mm VESA monitor to a 100 x 100 mm VESA stand with this adapter plate..
  • Hardware included: The kit includes extra hardware for different mounting requirements including M6 screws, M8 screws, nuts, plastic spacers, and the tv mounting adapter plate..
Check Stock

GlowShift Oil Filter Sandwich Adapter Compatible with GM Duramax Chevy Silverado GMC Sierra 2000-2013 - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs

  • GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
  • Compatible with 2000-2013 Chevrolet Silverado & GMC Sierra Duramax.
  • Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) 13/16-16 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

New Kamerar Digital Matte Box MAX-1.1 for Video and DSLR Camera Rigs and Cages

  • Removable / Adjustable Metal Top and Side Flags.
  • Requires 15mm Rails to mount (not included).
  • Some Cameras will need additional height adapter plate..
Check Stock

BGGTMO License Plate Bracket Holder- Front License Plate Mounting Kit, Universal Bumper Car Tag Frame Mount Adapter with Stainless Steel Screw Cap, Cable Ties

  • FOR FRONT LICENSE PLATE MOUNT- If you have 2 pre-drilled holes in your front bumper, no matter if the hole spacing or position is in line with standard license plate, you can use our front license plate adapter for license plate mount, if your car bumper has no hole, you can use our stainless steel cable ties to mount on the grille.
  • FIRM LICENSE PLATE TAG HOLDER - This front license plate bracket is made of black ABS plastic which resists corrosion and rust. The metal license plate does not directly contact the car paint, avoid scratches and noise, protect the license plate rustproof and rattle proof..
  • EASY TO INSTALL - Our front tag brackets have a unique design - 4 copper nuts with neat threads that hold the bolts tightly and hold the license plate on the bracket. The kit includes license plate mounting hardware: stainless steel license plate screws, black screw caps , stainless steel cable ties..
  • UNIVERSAL FRONT PLATE HOLDER- Designed to fit all standard 6x12 inch novelty/license plates. The black license plate holder is suitable for all vehicles with contoured bumper. The multiple mounting holes can be used as a good license plate adapter to install 4 holes or 2 holes or non-standard license plates..
  • WARRANTY - If you're unsatisfied with the durable ....
Check Stock

Flash Diffuser JJC Camera Flash Bounce Light Diffuser for Canon 580EX II Flash Speedlight-2 Packs

  • Use with MagDome Diffuser Kit to enhance your workflow creativity, increase the visual intensity of photos.
  • Universal Mount Adapter design suitable for all brand speedlight, such Godox, Canon, Nikon, Sony, YONGNUO, Neewer etc..
  • Magnetic Mount allows you easily install color filter diffuser and change accessories as needed.
  • The MagDome Diffuser Kit contains Dome Diffuser, Honeycomb Grid, Color Filter Gel and Universal Mount Adapter.
  • Lighweight, Portable, Compact size, No occupancy, Adapter Matte Pad for protecting your flash body and firmly installation.
Check Stock

DRRI V-Mount V-Lock to Anton Bauer Battery Adaptor Converter Plate Fit Sony HDV DSLR Rig Panasonic JVC Video (A-GP-S)

  • Sony V-Mount Lock Battery To Anton Bauer Plate Adapter Fit Sony Panasonic JVC Battery System, For Sony IDX ENG V-mount DV / HDV battery ,use for Sony v-lock battery..
  • Battery Adaptor Plate Anton to V mount /Sony V to Anton. Connect Sony V-Mount Battery..
  • Make sony V-Mount battery to Anton Bauer 3-stud mount plate or the same mount camcorder. Also can charge the sony V-Mount battery by Anton Bauer 3-stud mount power station..
  • Used for power converter plate A-GP-S. For Anton Bauer 3-stud mount plate to Sony V-Mount Lock. convert your RED I/O Vlock expander to accept gold mount batteries..
  • Packing including: 1 x sony V-Mount Battery.
Check Stock

SmallRig Hero7 / Hero6 / Hero5 Cage , Aluminum Video Cage with 52mm Filter Mount and Mic Adapter Holder for GoPro Hero7 / Hero6 / Hero5 Black CVG2320

  • 52mm Filter Adapter: SMALLRIG go pro cage comes with a 52mm filter adapter on the cage where you can mount filter lens or polarizing lens of diameter 52mm.
  • Install Way:1.put the Go Pro into the cage.
  • 2. lock it by knob screws(NOTE:Please rotate 2 screws at the same time until tightening).
  • Full Access to Buttons:SMALLRIG go pro 7 cage ensures full access to camera buttons, HDMI&USB-C ports and screen. Simply put the Go Pro into the cage and lock it by knob screws, which is very convenient to use without tools.
  • Compatible Go pro Tripods: On the bottom is a detachable Go Pro type mount so it’s compatible with Go pro tripods. A 1/4’’-20 threaded is left on the bottom after taking off the mount.
  • Features a Clamp: For people using original Go Pro Pro 3.5mm Mic Adapter, this cage features a clamp to mount the mic adapter on the right, which makes the camera rig compact and tidy.
Check Stock

SRS SATELLITE RADIO SUPERSTORE Satellite Radio Motorcycle Installation Kit with Sirius XM Commander Touch Receiver, Water Resistant Case, RAM Mount Adapter and Mounts

  • ... a rubber wrap that goes around the Commander Touch Touch-Screen display screen to keep out water and dust..
  • Package Includes: Commander Touch Display Controller, Sirius XM Radio Antenna, Water resistant rubber wrap, Hideaway Sirius XM Tuner, Power Harness (hardwired), FM Modulator FMDA25 (hardwired), RAM Mount Ball Adapter Plate, Clamp Mount, Adjustable Strap Mount, AMPS Adapter Plates (Male & Female), Metal L-bracket, AUX Audio Cable, Installation Instructions (English).
  • Mounting Options: There are three mounting options included in the installation kit. 1) RAM Mount Adapter – install the controller directly to a 25MM RAM mount with the included RAM Mount Adapter Plate. 2) Adjustable Strap Mount – adjust the strap to fit almost any size bar. perfect for large and square handlebars. 3) Clamp Mount – securly mount to standard size handlebars..
  • Audio Options: 1) Direct FM Integration – with the supplied FMDA25 Direct Wire Adapter you can connect the system to any AM/FM radio. When powered on the system will take over an FM station and play SiriusXM Radio programming via that FM station with no static. 2) AUX Cable – included in the package is an auxiliary cable that can connect to any stereo system with a 3.5mm aux input..
Check Stock

True Trac 105TPC Universal Track Saw Guide Pro-Series 8ft Combo Kit

  • Standard kit includes everything needed to mount virtually any circular saw 6.25" - 8.25" (Specialty plate for 10"+).
  • Universal Adapter Plate is machined to precisely fit the double-bevel design of the track.
  • Anti-Chip Strips prevent tear-out on the top surface of your cut, provide line-of-cut indication, and anti-slip capability.
  • Self-aligning dovetail connectors allow easy, hassle-free expansion for longer cuts.
  • CUSTOMER MUST MOUNT ADAPTER PLATE - REQUIRES DRILLING HOLES IN YOUR METAL SAW BASE.
Check Stock

5 Core 2PCS PA Speaker Stands Adjustable Height Professional Heavy Duty DJ Tripod with Mounting Bracket, Tie and Carrying Bag, Extend from 40 to 72 inches, White - Supports 132 lbs SS HD 2 PK WH

  • Adjustable height from 39" inches to 69" inches. Designed for maximum stability even at its top height of 69" inches. Includes 2 sets of scrims (black and white). Includes 2 travel bags for easy transporting. Includes 2 35mm pole mount speaker adapters for mounting speakers. Non-slip foam EVA pads can be attached to the top plate. Velcro cable ties included for neat cable management. Unique, spring loaded turn and lock mechanism for easy height adjustment..
  • Base and top plate have integrated transport handles. Includes frame support bars to assist with stability. Includes 8mm quick release thumb screws and bolts for easy assembly. Color: White. Steel Construction. Base plate (W x D x H): 24.6" x 24.6" x 0.19" inches. Top plate (W x D x H): 11.8" x 11.8" x 0.11" inches. Short Pole mount speaker adapter Length: 3.54”. Long Pole mount speaker adapter Length: 7.08”..
Check Stock

Microphone Stand for Blue Yeti, Snowball, Boom Arm Scissor Mic Stand with Shock Mount, Windscreen and Double layered Pop Filter, Heavy Duty Mic Boom Arm Stand, Broadcasting and Recording.Game

  • 【Blue Yeti Snowball Mic Stand with Metal Shock Mount】: Luling Arts microphone arm with shockmount desgined for Blue Yeti, Yeti Pro ,Blue Snowball or mount most standard 1/4'' to 5/8'' adapter microphones.also comes 3/8'' to 5/8''Screw adapter.the mic arm with shock mount Max Support Weight is 70 oz/2 kg (4.4pound)..
  • 【BLUE Snowball boom arm with shockmount】This Blue yeti boom arm Improved leg from hollow to solid ,no longer break or shake. more Stability Range of motion and stronger. Will not break the legs,the market will break the legs after 6 months of use..
  • 【BLUE SNOWBALL Yeti Mic Stand with Pop filter】:This adjustable blue snowball yeti microphone stand comes double layer Pop Filter,snowball mic foam cover,double reduce the plosive, wind interference, saliva spraying.free angle and height to show your perfect voice let you pick up any times..
  • 【Upgraded table mounting clamp for BLUE】:The microphone boom arm desk mount Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up ....
Check Stock

ULANZI G9-5 Housing Case for Gopro Hero 11 10 9, Aluminum Video Cage with 2 Cold Shoe Mount for Mic and Led Light, Protective Frame with 52mm Filter Adapter, Lens Cap, Compatible with Tripod

  • 【Designed for Gopro HERO 11 & 10 & 9】Ulanzi case is specially designed for Gopro Hero 11 10 9 Black sports cameras. Keeps your camera away from dust,scratches,knocks or dumps.
  • 【52mm Filter Adapter】Ulanzi gopro 9 10 11 cage comes with a 52mm filter adapter on the cage where you can mount filter lens or polarizing lens of diameter 52mm.
  • 【Two Cold Shoe Mount 】With Cold Shoe Mount on Top and Right Side, you can mount microphone or led video light on it, necessary for Gopro Video Shooting..
  • 【Battery Cover with Charge Interface】Sliding battery cover is designed on the left side, the battery can be replaced at any time, Interface on the left side charge Gopro 9 10 11 without taking off the cage..
  • 【Compatible Gopro Tripods】On the bottom is a detachable GoPro type mount so it’s compatible with Gopro tripods. A 1/4’’-20 threaded is left on the bottom after taking off the mount..
Check Stock

Dickies Men s Casual Leather Belt Black Ben 40

  • Compact in Size: these aluminium camera mount adapters are compatible with RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / Kangrinpoche /....
  • with Standard Anti-twist Locking Screw: the release plate camera mount locking screw has exquisite workmanship, compatible with 1/4''-20 camera screw.
  • Non-slip Design: the tripod adapter mount has special anti-slip rubber pads, which can enhance the grip between each plate and the mounted gear, and....
  • Easy to attach and detach: the universal quick release plate can be fixed to the camera base, which are convenient to use, help you save your time and....
  • Nice Workmanship: the quick release plate is made of aluminium alloy metal material and is processed by numerical control, the surface is finely....
Check Stock