Categories

Best Filtering Centrifugal

Centrifugal Blower Fan Air Mover 1354 CFM Centrifugal Extractor Fan Blower 300W 1450 RPM Industrial High Velocity Ventilation Fan Air Exhaust Vent Cooling Radial Centrifugal Flow Blower

  • 【HIGH QUALITY CENTRIFUGAL FAN】PP250 centrifugal blower fan, is made of high quality PP (Polypropylene) material, non-toxic and tasteless, environmentally friendly and healthy. Corrosion resistance, wear resistance, high temperature resistance, durable and long-lasting, very suitable for laboratory ventilation cabinets..
  • 【HIGH WORKING EFFICIENCY】Working method of centrifugal, 1354 CFM air flow, 260 Pa hydrostatic pressure, 40 db noise, with suction and low noise. Reliable and durable, suitable for long-term ventilation work..
  • 【LARGE SUCTION & LOW NOISE】With large suction and low noise, this ventilator exhaust fan is very suitable for chemical gas anti-corrosion fans such as laboratory fume hoods, ventilation medicine cabinets, medicine cabinets, and chemical cabinets..
  • 【HIGH-OUTPUT BLOWER FAN】High-output fan design, large suction, provides a large capacity of 134 cubic meters per minute. Constructed by sturdy shell, compact design, small size, easy to carry, easy to use and store..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 10 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 12 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
  • Go Kart Clutch kit：Clutch and bolt & hexagonal wrench.
Check Stock

Desktop Electric Lab Laboratory Centrifuge Machine Lab Medical Practice w/Timer and Speed Control,Low Speed,Capacity 20 ML x 6-110v,4000 RPMby CALU LUKY

  • Centrifuge Machine -Time Rang:0~60min or without limit. Maximum relative Centrifugal force: 1790×g. Electric current:AC110V 60 HZ. Capacity:20ml×6.
  • Maximum speed: 4000r/min.6 Tubes are provided in this lab centrifuge, the centrifugal capacity is 20ml per tube, benefitting your workflow efficiency.
  • Widely Used:Table-centrifugal machines are widely used in the laboratory or produce department for organisms、 medical、 chemistry etc. Our lower....
  • Lab Benchtop Centrifuges:Please insert the tubes into the machine symmetrically, or will not work properly in an asymmetric state.It has 3 adjustable....
  • Easy to Install:Centrifugal machine is easy to use with its clear control panel for controlling the speed and time. bench-top centrifuge is equipped....
Check Stock

Electric Centrifuge Machine Lab Centrifuge 8x20ml 4000rpm for Serum/Fat Separator PRP Extractor 110V US Plug

  • [PARAMETERS] Capacity: 8x20ml, speed: 0-4000rpm, relative centrifugal force: 1920xg, voltage: 110V, timing: 0-999min.The test tube capacity of this centrifuge is 20ml, and the actual centrifugal capacity should not exceed 80% of the test tube capacity. This is the best centrifugal effect..
  • [TIMING&SPEED CONTROL] 0-4000rpm speed is adjustable, 0-999min timing, please adjust the time and speed according to your needs..
  • [LCD DISPLAY] Real-time display of speed and time on the digital display screen, you can check the remaining time during work..
  • [TRANSPARENT COVER] The transparent cover is convenient for observing the centrifugal effect, and has the function of opening the cover. After the cover is opened, the machine will stop rotating immediately..
  • [Satisfactory service] We provide a one-year warranty period, if you have any questions after receiving the goods, please contact us directly. We will give you a satisfactory answer within 24h..
Check Stock

QWORK Centrifugal Casting Crucible, 2 Pack Zirconia Casting Cup Machine Crucible Hooded for Dental Lab, Over 200 Times of Use

  • High quality: QWORK Casting Cup made of fused silica and high-quality zirconia..
  • High efficiency: Can be used more than 200 times by centrifugal casting machine, can be used about 20 times by high-frequency casting machine..
  • Note: It is recommended that the melting temperature is not higher than 1371 degrees Celsius or 2500 degrees Fahrenheit..
  • Widely used: Suitable for replacing the ceramic crucible of the centrifugal casting machine..
  • Package include: 2 Pack Centrifugal Casting Crucible..
Check Stock

Fan Filter Unit Clean Room with HEPA-Filter Cleanliness Class 100 Laminar Flow Hood for Lab Phone Repair

  • ...absorbs the air from the top of it, and through the pre-filter and HEPA filter. The clean air after filtering will be send out by the whole air supply grille..
  • ♛--110V COPPER MOTOR-- This air flow clean workstation uses 110V copper motor, instead of using a transformer directly on a 220 V machine. Also. Multi-wing centrifugal fan can provide high air volume and high static pressure conditions, it ensures that it can be used in different environments..
  • ♛--ALUMINUM STAND-- The worktable bracket of the laminar flow hood is made of 40*40 high-strength aluminum material, which is firm and not easy to deform. With 40*40 connection angle code, it can be connected firmly and seamlessly..
  • ♛--WIDE APPLICATION-- This class 100 dust free worktable is widely used in factories, laboratories, mobile phone maintenance, mobile phone paste screen and various industries that need to achieve dust-free treatment in working areas..
Check Stock

L20-202Y 20mm Electric Motor Centrifugal Switch, Electric Clutch Controller Parts 3000RPM

  • Motor centrifugal switch: Shaft diameter 20mm, 3000RPM..
  • Advantages: Helps to start the motor safely and quickly. Easy to install and easy to use..
  • Model: The number behind the model L of the centrifugal switch is the size of the large round hole and the size of the motor shaft. For example, L20-202Y, the shaft diameter is 20mm..
  • The difference: The centrifugal switch is divided into a centrifuge and a bottom plate, and the bottom plate is mainly at a different contact position..
  • Friendly Tips: There are two levels and four levels. The two levels are 3000RPM, the numbers are 2.
  • the fourth level is 1500RPM, and the number ends with 4..
Check Stock

Electric Pto Clutch Repl Grasshopper 606242

  • Fitment:Grasshopper 388767, 388769, 606242, 388771, 388768, 604183, 71379, Kees 7058295, Prime 7-06270, 7-06279, Massey Ferguson 58925, 7058925, McCulloch 58925, 7058925, Craftsman 35520.
  • Fitment: Ariens 00574200, 574200, 09407700, 990003, 990004, 990300, 09049000, Gravely 09049000, Warner 5218-147, 5218-214, 5218-257, 5218-26, 5218-58, 5218-67, 5218-1, 5218-33, 5218-238,.
  • Fitment: Toro Z320 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z325 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z350 2000 (SN 200000001-200999999) 2001 (SN 210000001-210999999), Z355.
  • Its working is totally depends upon the centrifugal force created by the driving member (engine or motor). The centrifugal force is used to engage the clutch with driven shaft. As the engine starts rotating, it produces a centrifugal force which makes the sliding shoes to move outward. Since the drum is connected to the driven shaft, so the power is transmitted from the engine shaft to the transmission shaft and finally to the load..
  • To ensure this part goes with your machine you should always go by the model number and serial number, which is normally found under the seat of your riding mower..
Check Stock

Lightweight Hair Dryer with Diffuser, Professional Ionic Blow Dryer, Negative-Ion Fast Drying Damage Protection Hairdryer, 3 Heat / 3 Speed Settings, 2 Concentrator Nozzles, for Home & Travel

  • 【High Power and High Wind Speed】The hair dryer adopts centrifugal 18 fan blades design, super strong digital motor, filtering up to 1100W, speed up to 10WRPM, and produces a stable airflow, which can speed up drying by 50%, saving you more time..
  • 【Intelligent Temperature Control】Upgraded intelligent temperature control, with power-off memory function, built-in thermometer, records the temperature about 20 times per second, provides uniform heat and overheat protection, and will not damage hair due to overheating..
  • 【Negative Ionic Protects Hair】High penetration negative ions hair care, built-in advanced negative ions generator uses turbo acceleration to provide more than ten times more ions, helps remove static electricity on hair and reduces frizz.
  • natural ion output helps fight frizz, leaving Hair is left with a natural shine..
  • 【Meet Your Needs】 3 heat settings (hot/hot and cold cycle/cold) and 3 wind speeds (low/medium/high), equipped with 3 spotlight nozzles, precisely meet the needs of all hairstyles: curly hair, straight hair, Thin or thick hair. The perfect hair styling tool to create your favorite hairstyle easily at home..
  • 【High Performance And More Convenient】360°rotatable magnetic suction nozzle.
Check Stock

Ryobi One PLUS+ AC80RL3 OEM .080 Inch Twisted Line and Spool Replacement for Ryobi 18v 24v and 40v Cordless Trimmers Pack of 6

  • Cordless grass trimmer spool line diameter 0.080 inch to fits line hole perfectly. Spool line length 11ft provide a wider range of mowing..
  • Compatible with Ryobi cordless trimmers:18V,24V and 40V. Replacement spool model Ryobi ONE+ AC80RL3..
  • Auto feed system replacement trimmer spool eases the tedious work of hand-winding spools. Use centrifugal force and aerodynamics to reduce drag and....
  • Strong centrifugal force and cutting fast during using, recommend to wear eye protection and long pants to avoid unnecessary injury..
  • High-quality ABS spool & durable polyamide nylon thread, flexible and long service life. Use centrifugal force and aerodynamics to reduce drag and....
Check Stock

EMD Millipore UFC501024 Centrifugal Filter Units, 10k NMWL, 24/pk, Green

  • Membrane: Ultracel-um Regenerated Cellulose.
  • Description: EMD Millipore UFC501024 Centrifugal Filter Units, 10k NMWL, 24/pk, green.
Check Stock

TAKPART Electric Lawn Mower PTO Clutch for Warner Grasshopper Snapper Toro 5218-1 5218-67 388769 606242 7058925YP 105-1671

  • Fitment:Grasshopper 388767, 388769, 606242, 388771, 388768, 604183, 71379, Kees 7058295, Prime 7-06270, 7-06279, Massey Ferguson 58925, 7058925, McCulloch 58925, 7058925, Craftsman 35520.
  • Fitment: Ariens 00574200, 574200, 09407700, 990003, 990004, 990300, 09049000, Gravely 09049000, Warner 5218-147, 5218-214, 5218-257, 5218-26, 5218-58, 5218-67, 5218-1, 5218-33, 5218-238,.
  • Fitment: Toro Z320 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z325 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z350 2000 (SN 200000001-200999999) 2001 (SN 210000001-210999999), Z355.
  • Its working is totally depends upon the centrifugal force created by the driving member (engine or motor). The centrifugal force is used to engage the clutch with driven shaft. As the engine starts rotating, it produces a centrifugal force which makes the sliding shoes to move outward. Since the drum is connected to the driven shaft, so the power is transmitted from the engine shaft to the transmission shaft and finally to the load..
  • To ensure this part goes with your machine you should always go by the model number and serial number, which is normally found under the seat of your riding mower..
Check Stock