High-Temp Vinyl Fine Line Fineline Masking Tape Automotive Curves Car Auto Paint 5mm x 33m/Roll 3pcs

  • High Temperature 150 ℃ , 30 Min No Adhesive transfer.
  • Highly Conformable and Suitable for narrow curves being masked..
  • Low tack adhesive is resistant up to 132℃ and wil remove cleanly without residue transfer.
Check Stock

Pacon Printable Adhesive Paper (PAC2005), Blue

  • Provide instant borders to your display boards.
  • Simply customize presentation materials, print on an inkjet printer and stick.
  • Adhesive is permanent for a secure hold and easy mounting.
  • Each sheet is white with a border that has a fine white line inset to add more dimension.
Check Stock

Mix 6Rolls High Temperature Vinyl Fine Line Fineline Masking Tape Car Auto Paint 2mm 2.5mm 3mm 4mm 5mm 6mm

  • Fine Line Masking Tape 6Rolls 2mm 2.5mm 3mm 4mm 5mm 6mm Mixed.
  • Length: 33meter (110ft) Wide by choice Thickness: 0.11mm.
  • Material: vinyl High Temperature 150 ℃ , 30 Min No Adhesive transfer.
  • Highly Conformable and Suitable for narrow curves being masked..
  • Low tack adhesive is resistant up to 132℃ and wil remove cleanly without residue transfer.
Check Stock

JINBING Mix 6Rolls High Temperature Vinyl Fine Line Fineline Masking Tape Automotive Car Auto Paint 1mm 1.5mm 2mm 2.5mm 3mm 4mm

  • Fine Line Masking Tape 6Rolls 1mm 1.5mm 2mm 2.5mm 3mm 4mm Mixed.
  • Length: 33meter (110ft) Wide by choice Thickness: 0.11mm.
  • Material: Vinyl High Temperature 150 ℃ , 30 Min No Adhesive transfer.
  • Highly Conformable and Suitable for narrow curves being masked..
  • Low tack adhesive is resistant up to 132℃ and wil remove cleanly without residue transfer.
Check Stock

Healifty 4 Pcs Hard Denture Brush Double Sided Toothbrush Multi- Layered Bristles Fake Teeth Cleaning Brush Denture Care (Green)

  • HOW TO USE: Step 1. Gently use the fingernail like ridge located around the perimeter on the back to scrap adhesive off your upper palette and upper inner and outer gum line. Step 2. Use the HARD non-flexible bristles to snag and remove the collected adhesive. Clean adhesive off the DART with a stiff toothbrush. Step 3. Use the same procedure for the lower, inner and out bottom gum line. Use the spanning legs or HARD bristles to remove collected adhesive..
  • GLUE REMOVER: Featuring a patent pending bristle design, the Denture Dart is rigid with various textures to collect and remove powder denture adhesive powder. It works in those hard to reach areas where adhesive is difficult to remove. Denture brushes and toothbrushes smear the glue on the roof of your mouth and make a mess. Please Note: The Denture Dart is not intended for use to remove denture glue or adhesive from dentures. It should not replace your actual denture brush..
  • EASY ADHESIVE REMOVAL: Instead of using basic denture brushes for dentures, the Denture Dart makes removing stubborn powder adhesive a breeze! Use the Denture Dart from the back of your mouth to the front, dislodging adhesive from inner and outer, upper and lower, gum line, and remove with the bristled head..
Check Stock

Ardell Deluxe Pack Lash, 110 Black

  • Check Fit: Lay Lash On Top Of Your Natural Lash. If It Extends Beyond Your Lash Line, Trim The Excess With Small Scissors.
  • Apply Adhesive: Squeeze A Thin Line Of Lashgrip Adhesive Along The Lash Band. A Toothpick Can Be Used To Spread It Evenly. Wait About 30 Seconds For Adhesive To Set..
  • Apply Lash: Place The Lash As Close To Your Natural Lash Line As Possible. Use Your Fingertip To Gently Press Along The Band To Secure In Place..
  • Soft Tip Helps To Gently Secure And Place Lashes.
Check Stock

Dura-Gold Premium 5\ Green Film PSA Sanding Discs - 800 Grit (Box of 50) - Film Back Self Adhesive Stickyback Sandpaper Discs for DA Sanders, Fast Cut Abrasive - Sand Automotive Paint Woodworking Wood

  • Box of 50 Dura-Gold Premium 5" 800 Grit Green Film PSA Sanding Discs. High-performance extra fine-cut 5" finishing film back sandpaper discs that have an easy-to-pull tab for peeling off the backing cover of the discs PSA pressure-sensitive adhesive. The sticky adhesive backing enables the discs to be quickly and securely attached to a DA sanders PSA backing plate..
  • Superior quality sanding discs made with super coated aluminum oxide corundum that's fused with zirconia alumina. Discs have an extra-tough polyester film backing. It delivers a fast, exceptionally long-lasting sharp cut with a consistent scratch pattern. It has maximum resistance to clogging and loading, increasing your productivity and reducing material consumption..
  • These extra fine-cut sandpaper discs are ideal for sanding on all types of surfaces. Use them to finish sand automotive paint, primers, and putties before painting or for removing scratches and extra fine finish sanding on wood and paint..
  • Our sandpaper discs are suitable for use in auto body and paint shops, woodworking wood furniture making, metalworking metal sanding, crafting, household, drywall, industrial, fiberglass, plastics, or any other surface that needs sanding..
  • Dura-Gold offers a complete vast product line of prof....
Check Stock

IDL Packaging 1-inch x 60-Yard Blue Painter's Tape, Natural Rubber (Pack of 9 Rolls) – Sharp Lines and Surfaces Protection – Easy-to-Remove Tape Leaving no Residue – Perfect for Painting Works

  • Fine Line Masking Tape 6Rolls: 1/20" 1/16" 1/12" 1/10" 1/8" 1/6" Mixed.
  • Length: 33meter (110ft) Thickness: 0.11mm Material: Vinyl.
  • High Temperature 150 ℃ , 30 Min No Adhesive transfer.
  • Highly Conformable and Suitable for narrow curves being masked..
  • Low tack adhesive is resistant up to 150℃ and wil remove cleanly without residue transfer.
Check Stock

Denture Dart V2 Hard Plastic Denture Gel Adhesive Remover - Remove Denture Gel Adhesive from Mouth & Gums, Denture Glue Removal Tool, Oral Hygiene, Scraper w/Textured Grip and Rigid Bristles

  • HOW TO USE: Step 1. Gently use the fingernail like ridge located around the perimeter on the back to scrap adhesive off your upper palette and upper inner and outer gum line. Step 2. Use the HARD non-flexible bristles to snag and remove the collected adhesive. Clean adhesive off the DART with a stiff toothbrush. Step 3. Use the same procedure for the lower, inner and out bottom gum line. Use the spanning legs or HARD bristles to remove collected adhesive..
  • GLUE REMOVER: Featuring a patent pending bristle design, the Denture Dart is rigid with various textures to collect and remove denture glue. The cleaner works in those hard to reach areas where adhesive is difficult to remove. Denture brushes and toothbrushes smear the adhesive on the roof of your mouth and make a mess. Please Note: The Denture Dart is not intended for use to remove denture glue or adhesive from dentures. It should not replace your actual denture brush..
  • EASY ADHESIVE REMOVAL: Instead of using basic denture brushes for dentures, the Denture Dart makes removing stubborn adhesive a breeze! Use the Denture Dart from the back of your mouth to the front, dislodging adhesive from inner and outer, upper and lower, gum line, and remove with the bristled head..
Check Stock

Denture Dart V4 Hard Plastic Denture Brush - Denture Gel Adhesive Remover - Remove Denture Gel Adhesive from Mouth & Gums, Oral Hygiene Products, Scraper w/Textured Grip and Rigid Bristles

  • HOW TO USE: Step 1. Gently use the fingernail like ridge located around the perimeter on the back to scrap adhesive off your upper palette and upper inner and outer gum line. Step 2. Use the HARD non-flexible bristles to snag and remove the collected adhesive. Clean adhesive off the DART with a stiff toothbrush. Step 3. Use the same procedure for the lower, inner and out bottom gum line. Use the spanning legs or HARD bristles to remove collected adhesive..
  • GLUE REMOVER: Featuring a patent pending bristle design, the Denture Dart is rigid with various textures to collect and remove powder denture adhesive powder. It works in those hard to reach areas where adhesive is difficult to remove. Denture brushes and toothbrushes smear the glue on the roof of your mouth and make a mess. Please Note: The Denture Dart is not intended for use to remove denture glue or adhesive from dentures. It should not replace your actual denture brush..
  • EASY ADHESIVE REMOVAL: Instead of using basic denture brushes for dentures, the Denture Dart makes removing stubborn powder adhesive a breeze! Use the Denture Dart from the back of your mouth to the front, dislodging adhesive from i....
Check Stock

2.5' H x 6' W, Custom Elegant Engraved Plate, Personalized Memorial Plaque, Brushed Stainless Steel or Brass Laser Engraved Name Plates with Adhesive Backing or Screws, Notched Corner (Silver, Gold)

  • ✅【Unique Design】The notched corner plate design with a simple line border, and the square corner plate design with an elegant wreath border. The personalized plate with up to five lines of free engraving (50 characters per line max)..
  • ✅【Premium Material】2.5" H x 6" W plaques are made of brushed stainless steel or brass, which very durable. The laser engraved for super fine texts. The texts are clear, easy to read, will stay on engraved plate forever.
  • ✅【Wide Application】Adhesive or screw installation, we will give you free screws. Simply to peel off the adhesive backing and stick on any straight surface, such as frames, trophy, urn, walls, etc. The engraved plate can be stuck on the objects firmly, don’t worry about falling off..
  • ✅【How to Customize】Firstly, click the “Customize Now” button, then choose the plate color and font name to input texts. Please confirm your texts are correct, we will copy your texts for production without any modification..
  • ✅【What You Get】If you are not satisfied with your order, please tell us, you will get resend or refund. If you have any problems, please contact our customer service on Amazon..
Check Stock

D-Line 18\ One-Piece TV Cord Cover White, Half Round Cable Raceway, Desk Cable Management Solution, Decorative Cable Concealer - 2\ (W) x 1\ (H) x 18\ Length

  • All D-Line cord organizer solutions have been designed easy-to-install, no prior DIY or electrical know-how is required to install. D-Line Raceway is produced from high grade pvc, cable hider lengths can be easily cut to size (if required). Each D-Line cord cover length is supplied with strong self-adhesive backing, simply peel and stick D-Line cable raceway to a smooth clean surface, open hinged hid & snap shut utilizing patented click-lock lid..
  • D-Line TV Wire Hiders are available in a range of colors, however for the perfect finish D-Line Cable Raceway is fully paintable. To paint.
  • simply key the cable cover with a fine sandpaper & apply two coats of paint!.
  • To cover cords around a variety of popular angles, compatible D-Line wire cover accessory multipacks are also available. Design of D-Line Clip-Over bends & tees forgives any imprecise cuts or measurements, while Smooth-Fit connectors & end caps internal shoulders fit securely under lengths, leaving a smooth-flush finish. One-piece design of D-Line half round cable raceway, avoids need to cut lid & base separately..
  • Each pack includes: 1x D-Line 2" (W) x 1" (H) x 18" Half Round White Cord Hider Length. 18" length sufficient for common TV wall mount installations, however longer 39....
Check Stock

Fishing Vault High Output Ultra Violet UV Black Light LED Light Strip for Bass Boats & Night Fishing - Pack of 2

  • ... Your Fishing Vault night strips will come with extra long 6' wires that are both black. The background of the light strip is also black which will match your boat exterior or rub rail. Curved Edges to blend into the contour of your boat!.
  • DURABLE IP68 RATED WATERPROOF SILICONE ENCASED CONSTRUCTION & SUPER STRONG 3M ADHESIVE - These light strips can be submerged completely in water and still operate just fine. The strips will firmly attach to your boat due to the super strong 3M adhesive backing tape and will fully withstand the elements under the most extreme conditions..
Check Stock