2 Pairs Rockville RV68.2C 6x8/5x7 Component Car Speakers 1800 Watts/340w RMS CEA

  • Includes: (4) 6x8 speakers. (4) tweeters. (4) Crossovers. (4) Grills. Flush and surface Mounting accessories. Speaker wire. Features: Rockville....
  • Flex Motion Butyl Rubber Surround. 1.2 PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned....
  • Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers. Sensitivity: 91 dB @ 1w/1m. Mount depth: 2.52". Impedance: 4....
  • Magnet dimensions: 90mm x 15mm. Fs: 65.102 hz. Re: 3.6 OHM. Qes: 1.663. Qts: 1.173. Qms: 3.977. Fits 6x8 and 5x7 openings. Top mounting depth of....
Check Stock

Rockville Pair RV68.2C 6×8 / 5×7 Component Speakers+6×8 Coaxial 3-Way Speakers

  • ...vilIe RV68.2C 6×8 and 5×7 Component car speakers (pair). Peak Power Rating: 900 Watts per Pair / 450 Watts Each.
  • CEA Compliant RMS Rating: 170 Watts per Pair / 85 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids. Flex Motion Butyl Rubber Surround. 1.2 PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover. Frequency response: 32-22,000 Hz.
  • Crossover will cut anything lower than 3.5 Khz @ 12 dB / octave slope from the tweeters. Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers. Sensitivity: 91 dB @ 1w/1m. Mount depth: 2.52″. Impedance: 4 Ohm. Grilles included. Aluminum voice coils. 100% oxygen free copper voice coil windings. Black electro-plated T-yoke and washers. Cotton spider material. Copper terminals. Cutout diameter: 7.36 x 5.12. Magnet: 13.5 Oz Y25 magnet.
  • Magnet dimensions: 90mm x 15mm. Fs: 65.102 hz. Re: 3.6 OHM. Qes: 1.663. Qts: 1.173. Qms: 3.977. Fits 6×8 and 5×7 openings. Top mounting depth of woofer: 2.52 Inch (95% of installs use the top mounting depth). Bottom mounting depth of woof....
Check Stock

BNTECHGO 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0122\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 4 ounces(527 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0122"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315\ Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0157' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 4 ounces(323 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0157"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 24 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0221\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 24AWG magnet wire is 1.0 pounds(823 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 24 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0221"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0126\ Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 1.0 lb(2120 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0126"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0315' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 1.0 pounds(321 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0315"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0157' Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 1.0 lb(1300 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0157"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0157' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 1.0 pounds(1300 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0157"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock