Categories

Best Fine Thread Lag Bolts For Lag Shields

Mounting Dream Lag Bolt Kit for TV Wall Mount Comes with M7 Lag Bolt for Wood Stud Fischer Anchors for Concrete Wall Includes Allen Key and Bubble Level for Easy Installation MD5752

  • NO CONCERN ON RE-MOUNTING - Need to re-mount your TV but no extra lag bolts or concrete anchors? This kit includes M7x55mm lag bolts, Allen Key, Level and Fischer UX10x60 R..
  • HEAVY DUTY - Our M7 lag bolts are made of durable steel material, capable of heavy duty. They can keep your TV secure on the TV wall mount..
  • CONCRETE/BRICK WALL INSTALLATION - Wall type of your house is concrete/brick wall and need anchors? No need to waste your time getting to the hardware store. This lag bolt kit includes 6 Fischer UX 10x60 R concrete wall anchors..
  • EXTRA TOOLS FOR EASY INSTALLATION - This lag bolt kit also comes with Allen key and bubble level. Make your job easier and save your time..
  • GREAT CUSTOMER SERVICE - Have any questions about the specification or installation? We are glad to provide help on pre-purchase or installation questions for our customers at any time..
Check Stock

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock

Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2 x 1-1/2 Qty 250

  • Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2".
  • Commonly referred to as a lag screw or lag bolt.
  • Features the sharp cutting threads of a wood screw.
  • Commonly used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices.
  • 316 stainless steel is highly corrosion and rust resistant.
Check Stock

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

  • Allows for lag screw bolts to be installed into concrete, brick and block.
  • Inserts into a hole by tapping with a hammer until flush.
  • Lag screw expands the lag shield against the walls of the hole.
  • Drill hole with masonry drill bit based on diameter on anchor.
Check Stock

#14 x 4\ Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 500 Screw Count

  • Manufactured from High Quality Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible.
  • Corrosion Resistant Exterior Coated Screws Passed 1200 Hour Salt Spray Test Without Coating Failures.
  • .24 (#14) Thread Diameter, .508 Head Diameter Modified Truss Head Screw for Better Compression Force.
  • These Construction Lag Screws Far Exceed Standard Lag Bolts in Shear Compression Forces.
  • Excellent Screw for Decking, Fencing, Roofing, Framing, Timber Frame or Post, and Beam.
Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

  • 【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
  • 【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
  • 【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
  • 【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
  • 【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Zinc Plated Steel Hanger Bolts #8-32 x 2

  • Zinc Plated Steel Hanger Bolts featuring a #8-32 Machine Screw Thread.
  • Feature a half unified threading and a half lag screw threading.
  • Commonly used for suspending electrical wire and sheet metal.
  • Also commonly used in applications where a hidden joint is required such as furniture making.
  • Zinc Plating offers an extra layer of corrosion resistance and a shiny finish.
Check Stock

The Hillman Group 491358 Hanger Bolt, 1/4-20 X 3-Inch , 2-Pack

  • Hanger bolts ideal for hanging materials from wooden structures, walls, or overhead.
  • Assembly is complete when the lag end is screwed into a pre-drilled hole.
  • Included variants range from 1/4"-20 to 3/8"-16 in coarse thread size.
  • Included variants range from 2" to 4" in length.
  • Stainless steel finish for best-in-class corrosion resistance.
Check Stock

Heavy Duty Bolts, Concrete Anchors TV Wall Mount Screws Kit for Mounting A TV Into Wood Or Concrete

  • Re-mounting, but lost your old hardware? This kit includes everything you’ll need for wood or concrete installs..
  • Our lag bolts are custom-hardened to prevent snapping or breaking..
  • Note: Concrete anchors are not compatible with wood and drywall.
  • If you have any question? contact us please..
Check Stock

1/2 x 6” 25-Piece Black Lag Bolts Rustproof 4-Layer Ceramic BLAKOTE 2X Protection of Galvanized Lag Screws for Decks Pergolas by Makers Bolt

  • Secure Exterior Structural Wood - Ideal for deck wood, exterior plywood, and other marine grade plywoods, our heavy-duty lag screws make wood-to-wood fastening a breeze. Each pack comes with 25pcs of ½” diameter hex screws..
  • 2x Corrosion Protection - These lag bolts for wood are made of an exterior grade 4-layer black ceramic coating called Blakote. With twice the protection of standard galvanized wood screws, they won’t tarnish after exposure to highly corrosive environments..
  • Better for Outdoor Applications - Our structural screws have a black matte finish. They’re tougher for outdoor wood projects than our black oxide finish..
  • Comes in Different Lengths - Use these construction wood screws on decks, gazebos, trusses, and other wood connections. Our lag bolts are available in 1/2" diameter and in lengths up to 8”..
  • Uniform Heads and Precise Threading - Makers Bolt screw sets are specially manufactured under tight tolerance, ensuring precision and uniformity in production..
Check Stock

3/8 x 3 Stainless Hex Head Lag Bolt Screws 25 Pack 304 18-8 Stainless Steel Coach Bolts/Large Screws for Wood with Plain Finish by Bolt Dropper

  • 【Dimensions】Diameter: 3/8" | Length: 3" | Thread Type: Coarse (standard) | Wrench Size for Hex Head: 9/16" | Quantity: 25 pcs | Material: 18-8 (304) Stainless Steel..
  • 【High Quality Stainless】No More Rust Stains! These Stainless Steel Lag Screws are 100% 304 Stainless Steel which is one of the highest forms of corrosion resistant steel, making it last longer than other hardware on the market today. Deep cut, coarse threads for superior holding and prevent stripping in the material..
  • 【Bolts That You Can Depend On】Our hardware is very strong and is great for both indoor and outdoor use. The 18-8 Stainless Steel is superior to regular steel and provides excellent rust resistance in both fresh and saltwater applications..
  • 【Lifetime Guarantee】We are so confident that our stainless steel lag screw products are the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

The Hillman Group The Hillman Group 731 Hanger Bolt 1/4 x 2 1/2 In. 20-Pack,Zinc

  • Hanger bolts ideal for hanging materials from wooden structures, walls, or overhead.
  • Assembly is complete when the lag end is screwed into a pre-drilled hole.
  • Included variants range from #10-24 to 3/8"-16 in coarse thread size.
  • Included variants range from 3-1/2" to 6" in length.
  • Zinc finish for improved corrosion resistance.
Check Stock