Categories

Best Fine Thread U bolt

Prime-Line 9071931 U-Bolts, Round Bend, 1/4 inch-20 X 1-1/8 inch X 2-1/4 inch - (3/4 inch Pipe), Zinc Plated Steel, (10-pack)

  • STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
  • DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
  • U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 5- 5/16" Inside Height (Length).
  • Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
  • Threading: 1/2"-13 with a thread length of 2- 1/2"..
  • U-Bolts and hardware are made out of 304 Stainless Steel..
  • These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..
Check Stock

Square U-Bolt Stainless Steel Square Bend U Bolts with Nuts and Frame Plate for Automobiles Trailer Ski Boat or Sailboat Trailer 2 W x 4.3 L ,M10*50 * 120

  • 1.What You Get: 4 U-bolts, 8 hexagon nuts, 4 plates, these additional accessories are galvanized as well. You can spend less time doing your work with these handy tools!.
  • 2.Quality Material: Made of 304 Stainless Steel, with great performance in anti-rust and corrosion resistance, it can be used outside and withstand harsh weathers..
  • 3.Strong and Sturdy: Strong and durable, rust resistance, moisture resistance, and corrosion resistance. The surface without burr and thread good grip, u clamp still perform well in rainy and humid seaside environment..
  • 4.U-bolt Size: 2 " W x 4.3 L", thread length: 2 inches, suitable for 2" x 2" square beams and shafts, (Please check the size carefully before order).
  • 5.Widely Used: The M10 square U-bolts are great tools to fix or connect the locked parts to pipes, wood, etc. Suitable for boats, plumbing, and other home and industrial applications..
Check Stock

(4) Hot Dipped Galvanized Dipped Square U-Bolts (1/2\ D x 2 1/16\ W x 6 5/16\ L) for Boat Trailer

  • U-bolt Size: 1/2" D x 2-1/16" W x 6-5/16 L, thread length: 2-1/2" inches, suitable for 2" x 2" square beams and shafts, (order Please check the measurement size carefully before).
  • Hot Dipped Galvanized : U-bolts are made of Hot Dipped Galvanized，The white surface is a thick galvanized layer, which enhances the rust and corrosion resistance of the U-bolt..
  • You can get: (4) U-bolts, (8) hexagon nuts, (8) flat washers, (8) lock washers, these additional accessories are also Hot Dipped Galvanized. With these, you can spend less time repairing and more time boating.
  • Tips:Use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts..
  • After-sales service: Our U-bolts provide a one-year warranty service. Please rest assured, if you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours..
Check Stock

4 Sets 304 Stainless Steel Square U-Bolt Boat Trailer U-Bolts with Washers and Nuts L Heavy Duty U Bolts for Sailboat Trailer Automobiles Trailer Industrial Parts 1/2 D x 3 1/16 W x 4 5/16 Inch

  • Package includes: stainless steel u-bolt set include 4 pieces u-bolts, 8 pieces stainless steel flat washers, 8 pieces stainless steel nylon lock nuts, 8 pieces lock washers, all accessories are made of 304 stainless steel.
  • U-bolt size: 1/2 x 3-1/16 x 4-5/16 inch (D x W x L), thread length: 2-1/2 inches, suitable for 3 x 3 inch square beams and shafts.
  • Stainless steel material: u bolts for boat trailer are made of 304 stainless steel, strong and long-lasting.
  • These 304 stainless bolts prevent rust corrosion, acid corrosion and wear.
  • It's still perform well in rainy and humid seaside environment.
  • How to use: firstly choose the corresponding square U shaped bolt according to the size of the pipe, then drill holes in the connection, and finally lock nut and flat washer.
  • Use a hand wrench or socket ratchet when installing nuts.
  • Do not use an impact or a high speed socket driver.
  • Wide application: square u-bolt is applied to fix or connect the locked parts to rectangular wood and metal objects, such as cars, sailboat trailers, pipe, tube, plumbing and other industrial applications.
Check Stock

Aopin Round U-Bolts 1-1/2 inch 38mm M6 Inner Width 304 Stainless Steel 8pcs Self-Locking Nylon Insert Hex Nuts Flat Washers for Car/Motorhome/Sailing Trailer Replacement Part and Accessorie 4Pack

  • STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
  • DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
  • U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 4- 5/16" Inside Height (Length).
  • Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
  • Threading: 1/2"-13 with a thread length of 2- 1/2"..
  • U-Bolts and hardware are made out of 304 Stainless Steel..
  • These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..
Check Stock

Hardware Essentials 320898 Square U-Bolt-3/8X3Lx4W, Zinc

  • Square U-bolts are great for attachment to square shaped posts.
  • U bolt measurements are as follows – diameter (3’8”), thread count (16), inside length (3”), inside width (4”).
Check Stock

Powerbuilt 648906 4\ Gear Puller

  • Max reach: 3-3/8-in max spread: 4-in. Reversible two-jaw design for inside or outside pulls. Chrome vanadium steel yoke and jaws.
  • Fine thread center bolt for maximum torque and minimal effort.
  • Reversible two-jaw design for inside or outside pulls.
Check Stock

Universal Roof Box U-Bolt Clamps Cargo Carrier Roof Rack Bracket Kit Van Mounting Fitting Kit 85mm Internal Width 40mm Thick Luggage Rack Adjustable U Bolt Quick Release Latch for Roof Box Hardware

  • UNIVERSAL FIT - Universal roof box u-bolt clamps fit for car crossbars within 80mm, can accommodate luggage racks up to 40mm/1.57 inches thick, widely used in hatchbacks, sedans, SUVs, off-road vehicles, etc. NOTICE: Not fit for THULE Roof Box.
  • SIZE: Inner width 83mm/3.27 inches, outer width 90mm/3.54 inches, screw diameter 7mm/0.27 inches, 40mm/1.57 inches thick.
  • NOT EASILY DEFORMED - Roof rack mount u-bolt clamps has a rubber gasket and a plastic back plate, which can protect your car from scratches to the greatest extent, and can increase friction, which has a high hardness, good confinement effect, strong bearing capacity.
  • GALVANIZED STEEL MATERIAL - Universal roof box u-bolt clamps using galvanized steel material, durable, alkali resistance, and has a clear thread, uniform force and not easy to slip to improve overall stability.
  • PACKAGE INCLUDED - Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2pcs strap.
Check Stock

(4) Stainless Steel Square U-Bolt 1/2\ D x 3 1/16\ W x 4 5/16\ L Boat Trailer Ubolts with Washers and Nuts,Replacement Parts and Accessories for Automobiles Trailer, Ski Boat, or Sailboat Trailer

  • U-bolt Size: 1/2" D x 3-1/16" W x 4-5/16 L, thread length: 2-1/2" inches, suitable for 3" x 3" square beams and shafts, (order Please check the measurement size carefully before).
  • Tips: It is recommended to use lubricant during installation to prevent wear. Use a hand wrench or socket ratchet when installing the nut. Do not use a high-speed power tool or impact tool to tighten the nut..
  • 304 stainless steel material: U-bolts are made of 304 stainless steel, strong and durable, each bolt can withstand 100LBS.
  • You can get: (4) U-bolts, (8) heavy hex stainless steel nylon lock nuts, (8) flat washers, (8) lock washers. These are only half the price of the hardware store, with these you can spend less time repairing and more time boating.
  • 100 After-sales service: Our U-bolts provide a one-year warranty service. If you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours. Do not worry..
Check Stock

uxcell Round U-Bolts 4 Sets 0.63 16mm Inner Width 46mm Length Steel M6 with Nut Plate Washer

  • Hex Nut Size: 10 x 5mm / 0.39" x 0.2"(Hex Width*H).
  • Frame Plate Size: 50 x 18 x 2mm/ 1.97" x 0.71" x 0.08"(L*W*T).
  • Round Washers Size: 18 x 6 x 1mm / 0.71" x 0.24" x 0.04"(OD*ID*T).
  • Package Content: 4 x U-Bolt, 8 x Nuts, 8 x Round Washers, 4 x Plates.
  • Material: Steel construct u bolt, galvanized surface treatment, bending forming processing technology with great performance in antirust and corrosion resistance, high hardness and good tensile strength..
  • Application: U-bolt is used to fasten or attach locking components to pipes, wood, etc. Just insert and tighten the nuts at both ends. It is suitable for the connection of boats, pipelines, trailers, and industrial steel structure conduits..
Check Stock

National Hardware N222-463 2193BC U Bolt in Stainless Steel

  • Inside Width/Compatible Pipe Diameter: 1 inch.
  • Used to secure pipe, conduit, cable or other cylindrical objects.
  • Requires pre-drilled holes (hole should be the same diameter as the threaded post).
  • Thread Type: Coarse, Thread Class: UNC-2A, Point Style: Blunt.
Check Stock

ANLI TA-1UHF Antenna Trunk Mount For SO-239 Thread Antennas

  • UHF or SO-239 Thread Trunk mount accepts Optional Antennas having a PL-259 " UHF , M or PO " base thread..
  • For Standard Sedan type Trunks. Includes 15ft RG-58A/U Coax cable with PL-259 Connector..
  • Great for Amateur radio & Two way mobile antennas having an UHF base thread..
  • Fits ANLI WH-713 and WH-717 DualBand antennas, & other " UHF" ( SO-239 ) type base thread antennas..
  • Heavy Duty with 4 Allen bolt connecton and Ability for slight angle Adjustment.
Check Stock

Awclub Fully Threaded Rod, M6-1.0 Thread Pitch, 30mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 20pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 20Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock