Categories

Best Finish Machining

Carbide Rough Milling Insert Carbide Inserts for Steel, Stainless Iron and Cast Iron PVD (AlTiN) Coating Carbide Milling Insert/Carbide Inserts APMT1604PDER-H2 APKT1604 for BAP400R Milling Holder

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

GAR S-22 22 Speciman Surface Roughness Comparator AS9000 Compliant

  • Pocket size gage with 22 precision surfaces for specifying and controlling surface finishes.
  • There are twenty two replicated machined surface finish specimens with examples of six different machining processes: lapped, ground, blanchard ground, shape-turned, milled and profiled - ranging from 2 to 500 microinches.
  • The S-22 conventional machining microfinish comparator is rectangular in shape (2" x 5 3/8") and is a corrosion resistant electroformed nickel duplicate of actual machined surfaces.
  • Supplied in a leatherette case with engineering data and instructions.
Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

TE-CO 30502 Serrated End Clamp, For 1/4\

  • For workholding during machining applications.
  • Made from case hardened 1018 steel with a black-oxide finish.
  • Serrated teeth match all TE-CO Step Blocks.
  • Bridgeport type milling machines use Part No. 20402.
Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

  • Machining Range: precision machining, rough machining, plane processing and step processing..
  • High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
  • Made of cemented carbide, which has high hardness with good impact resistance..
  • New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

Persei Sling Mount Adapter Attachment 2PCS for Picatinny Weaver Rail

  • The adapter provides a sling attachment loop for any sling with or without a hook..
  • Durable Construction.Made of Aluminium with Black Finish..
  • Fits any 20mm Weaver/Picatinny rail system.Allen Wrench is Included..
  • Precision machining easy installation with less effort. Black matte finish..
  • Package List：2x Sling Mounts；2x Allen Wrench. Great For Rifles, Paintball, Shotguns & Airsoft With A Weaver/Picatinny Rail System..
Check Stock

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
  • This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
  • Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.
Check Stock