Categories

Best Finite Element Analysis Book

AGV Unisex-Adult Full Face K-5S Hurricane 2.0 Motorcycle Helmet Green Medium/Small

  • Fiberglass and carbon fiber composite outer shell.
  • Two outer shells and four EPS sizes for the most accurate fit.
  • Dimensions of outer shell and EPS optimized using FEM (Finite Element Method) analysis.
  • IVS (Integrated Ventilation System) with wide ducts hollowed into the EPS shell optimized in wind tunnel testing.
  • Central front air intake recessed in outer shell profile with a high-capacity direct duct.
Check Stock

AGV Unisex-Adult Full Face K-5S Tornado Motorcycle Helmet (Fluo Yellow, XX-Large)

  • Fiberglass and carbon fiber composite outer shell.
  • Two outer shells and four EPS sizes for the most accurate fit.
  • Dimensions of outer shell and EPS optimized using FEM (Finite Element Method) analysis.
  • IVS (Integrated Ventilation System) with wide ducts hollowed into the EPS shell optimized in wind tunnel testing.
  • Central front air intake recessed in outer shell profile with a high-capacity direct duct.
Check Stock

R1 Concepts Front Rear Brake Rotor Kit |Brake Rotors| Brake Disc |Drilled and Slotted|fits 2018-2022 Genesis G70; Kia Stinger

  • Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks..
Check Stock

Factor 55 00016 Hawse Fairlead 1.0 Gunmetal

  • All Factor 55 products are designed in house using the latest 3D CAD software and optimized using Cosmos FEA (Finite Element Analysis).
  • Before we release any products to the public, we also perform a destructive test on each design with the assistance of a test facility equipped with test measurement and data recording equipment.
  • From 6000 and 7000 series aluminums, to 6AL-4V titanium double shear pins, Factor 55 offers the very best designs made from the very best materials.
  • Factor 55 wants to make sure we are producing the highest quality, best value products for our customers.
  • Factor 55 parts are conducted at a test and measurement facility that is also certified for National Defense Department rigging and hoist testing.
Check Stock

Factor 55 00071-2 Strap Wraps (Pkg Of 2)

  • All Factor 55 products are designed in house using the latest 3D CAD software and optimized using Cosmos FEA (Finite Element Analysis).
  • Before we release any products to the public, we also perform a destructive test on each design with the assistance of a test facility equipped with test measurement and data recording equipment.
  • From 6000 and 7000 series aluminums, to 6AL-4V titanium double shear pins, Factor 55 offers the very best designs made from the very best materials.
  • Factor 55 wants to make sure we are producing the highest quality, best value products for our customers.
  • Factor 55 parts are conducted at a test and measurement facility that is also certified for National Defense Department rigging and hoist testing.
Check Stock

Factor 55 ULTRAHOOK Winch Hook with Shackle Mount - Gray

  • All Factor 55 products are designed in house using the latest 3D CAD software and optimized using Cosmos FEA (Finite Element Analysis).
  • Before we release any products to the public, we also perform a destructive test on each design with the assistance of a test facility equipped with test measurement and data recording equipment.
  • From 6000 and 7000 series aluminums, to 6AL-4V titanium double shear pins, Factor 55 offers the very best designs made from the very best materials.
  • Factor 55 wants to make sure we are producing the highest quality, best value products for our customers.
  • Factor 55 parts are conducted at a test and measurement facility that is also certified for National Defense Department rigging and hoist testing.
Check Stock

Factor 55 ULTRAHOOK XTV Winch Hook with Shackle Mount - Gray

  • All Factor 55 products are designed in house using the latest 3D CAD software and optimized using Cosmos FEA (Finite Element Analysis).
  • Before we release any products to the public, we also perform a destructive test on each design with the assistance of a test facility equipped with test measurement and data recording equipment.
  • From 6000 and 7000 series aluminums, to 6AL-4V titanium double shear pins, Factor 55 offers the very best designs made from the very best materials.
  • Factor 55 wants to make sure we are producing the highest quality, best value products for our customers.
  • Factor 55 parts are conducted at a test and measurement facility that is also certified for National Defense Department rigging and hoist testing.
Check Stock

Dorman 751-739 Front Driver Side Power Window Regulator And Motor Assembly Compatible with Select Chevrolet Models (OE FIX)

  • Improved replacement - this motor and regulator assembly features enhancements over the original design for greater reliability.
  • Failure-resistant design - incorporates redesigned window slide block for significantly greater durability than the original equipment design.
  • Simple replacement - no special tools are required to install this regulator assembly.
  • Quality engineering - this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

KLH Albany II 2-Way Bookshelf Speakers for Premium Studio Music |High Performance Home Theater|Hi-Res Surround Sound |Deep Bass Port | Detachable Magnetic Grille | Black (Pair)

  • 2-Way bass-reflex loudspeaker system with 1 x 5.25” Woven Kevlar mid/bass driver, and a high performance 1” Anodized Aluminum tweeter with a linear response faceplate..
  • Butyl rubber surrounds and braided tinsel leads on all drivers..
  • ¾” MDF construction featuring custom designed internal low resonance driver chambers and bracing optimized through finite element analysis..
  • Threaded mounting insert (¼”-20) on back panel.
  • Stamped steel driver baskets, featuring oversized magnets for superior control and output..
Check Stock

PAC RP5-GM31 Radio Replacement Interface with Built-In OnStar Package for 2007-2012 Yukon/XL/Denali Vehicles

  • All Factor 55 products are designed in house using the latest 3D CAD software and optimized using Cosmos FEA (Finite Element Analysis).
  • Before we release any products to the public, we also perform a destructive test on each design with the assistance of a test facility equipped with test measurement and data recording equipment.
  • From 6000 and 7000 series aluminums, to 6AL-4V titanium double shear pins, Factor 55 offers the very best designs made from the very best materials.
  • Factor 55 wants to make sure we are producing the highest quality, best value products for our customers.
  • Factor 55 parts are conducted at a test and measurement facility that is also certified for National Defense Department rigging and hoist testing.
Check Stock

KLH Albany II 2-Way Bookshelf Speakers for Premium Studio Music |High Performance Home Theater|Hi-Res Surround Sound |Deep Bass Port | Detachable Magnetic Grille | European Walnut Pair

  • 2x KLH Albany ll 2-Way Bass-Reflex Bookshelf Loudspeaker (European Walnut) - 2x Grilles - 8x Self-Adhesive Rubber Feet - Manual - KLH 10 Year Limited....
  • 2-Way bass-reflex loudspeaker system with 1 x 5.25" Woven Kevlar mid/bass driver, and a high performance 1" Anodized Aluminum tweeter with a linear....
  • Butyl rubber surrounds and braided tinsel leads on all drivers.
  • 3/4" MDF construction featuring custom designed internal low resonance driver chambers and bracing optimized through finite element analysis.
  • Threaded mounting insert (1/4"-20) on back panel.
Check Stock

HiGear 4 Way Winch Roller Fairlead - 10” Universal Mount -Cable Guide Heavy Duty Nut Disassembly 10in SUV Truck F150 8000 1000 12000lbs 14000 16000

  • All Factor 55 products are designed in house using the latest 3D CAD software and optimized using Cosmos FEA (Finite Element Analysis).
  • Before we release any products to the public, we also perform a destructive test on each design with the assistance of a test facility equipped with test measurement and data recording equipment.
  • From 6000 and 7000 series aluminums, to 6AL-4V titanium double shear pins, Factor 55 offers the very best designs made from the very best materials.
  • Factor 55 wants to make sure we are producing the highest quality, best value products for our customers.
  • Factor 55 parts are conducted at a test and measurement facility that is also certified for National Defense Department rigging and hoist testing.
Check Stock

ACDelco Gold 6K960 Standard V-Ribbed Serpentine Belt

  • ...erances to reduce vibration and therefore prolong belt life. Lubricated bearings and high temperature seals assure peak performance, the most critical element of a pulleys service life.
  • EXTEND SERVICE LIFE: Developed and designed using state-of-the-art three dimensional computer aided design (CAD) and finite element analysis (FEA) to ensure the optimal design and maximum structural integrity. Built to last, the Idler Pulley has superior resistance to dirt, salt, chemicals, and other under-the-hood contaminants.
  • RELY ON QUALITY AUTO PARTS: Dayco's essential engine parts and drive system solutions offer engine economy, efficiency, and exceptional performance while minimizing noise, vibration, and harshness. They strive to be first-to-market with built-to-last products such as high-quality engine timing belts, serpentine belts, drive belts, belt tensioners, and more.
  • TRUST IN DAYCO: Dayco is a global leader in the automotive parts manufacturing industry and has built a reputation for high-quality Dayco belts since 1905. The supplier is guided by their primary business strategy to anticipate and satisfy the needs of their customers through reliable products and services.
Check Stock