Categories

Best Fire Internal Hose Box

NOVINO Fire Hose Nozzle,2 inch NPSH Heavy-Duty Industrial Fire Hose Constant Flow Fog Nozzle with 2pcs 2" Aluminum Camlock Fitting Coupling Fire Equipment

  • Premium Quality Thermoplastic 2 inch NPSH thread fire hose nozzle attached to 2 x 2 inch NPSH threads female / male camlock. The stem of fire nozzle is made by brass and the camlock fittings is made by aluminum to make sure corrosion resistance and durable.
  • Fit for:The 2 inch NPSH fire hose nozzle is only for standard 2"inch NPSH/NPT thread hose ,NOT for NH/NST thread. Female 2" NPSH will only connect to a male 2" NPSH/NPT.
  • Use for: The 2 inch fire hose nozzle works great for fire hose and fire hose racks for lined&unlined fire hose. Spraying large consistent volumes water on fire fighter fireman station for extinguishing fires , also green house applications to put out fires,evaporate cooling,dust suppression,watering for green house,garden,yard,orchard when you need high volume water output.
  • Adjustable spray size: By rotating the industrial constant flow fog nozzle to control on and off and adjust spray size (straight stream and conical fog).
  • Maximum 100 psi water operating pressure,≈60 GPM gallons per minute(about), ≈70 feet distance,NPSH:National Pipe Str....
Check Stock

SpringSpray 1-1/2\ NST/ NH Fire Hose Nozzle Brass Fire Equipment Heavy Duty Industrial Fog Nozzle

  • ✅ EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. IDM of 1.5" NST/NH nozzle is 1.8585" and conforms to NFPA 1963 Standard for Fire Hose Connections 2014 Edition. If you need 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before order.
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Brass housing and brass stem, brass material for resistance to high temperature and impact, and for resistance to corrosion. Excellent watering equipment. 1-1/2" cast brass adjustable fog nozzle.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 85. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any d....
Check Stock

SpringSpray 1-1/2\ NST/NH Fire Hose Nozzle Spray Polycarbonate Jet Fog Industrial Fireman 1.5\ Nozzle 75 gpm Fire Equipment

  • ✅ EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. IDM of 1.5" NST/NH nozzle is 1.8585" and conforms to NFPA 1963 Standard for Fire Hose Connections 2014 Edition. If you need 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before order.
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Polycarbonate housing for resistance to high temperature and impact. Brass stem for resistance to corrosion.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 75. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any degree of conical fog.
  • 100% SATISFACTION SERVICE - We have a professional fire nozzles de....
Check Stock

SpringSpray 1-1/2\ NST/NH Fire Hose Nozzle Brass Fire Equipment Heavy Duty Industrial Jet Fog Spray Nozzle

  • ✅ EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. IDM of 1.5" NST/NH nozzle is 1.8585" and conforms to NFPA 1963 Standard for Fire Hose Connections 2014 Edition. If you need 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before order.
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Brass housing and brass stem, brass material for resistance to high temperature and impact, and for resistance to corrosion. Excellent watering equipment. 1-1/2" cast brass adjustable fog nozzle.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 85. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any d....
Check Stock

Fire Hydrant Adapter, 2-1/2\ NST (NH) Female x 2\ NPT Male Brass Fire Hose Hydrant Adapter with Pin Lug Fire Equipment Fitting Nipple for Fire Hydrants, Hoses, Pipes

  • 【Size】Brass fire hydrant adapters with 2-1/2" National Standard Thread (NST) female on one end for connecting to the hydrant and a 2’’ NPT male on the other end for connecting to a hose. Perfect for attaching to fire hydrant..
  • 【Material】Brass fire hydrant fitting is made of brass for corrosion resistance, ductility at high temperature and low magnetic permeability, they are more heat-resistant than aluminum rigid fire hose and hydrant adapters..
  • 【Easy Operation】Brass fire hose adapter with pin type lugs for quick connect and disconnect, easy to use. These fittings will not rotate as a hose is moved, making them less likely to loosen or break than swivel adapters..
  • 【Application】Brass fire adapter fittings used for connecting fire hose, pvc pipe and other low pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military and civil protection..
  • 【Quality Warranty】We did 100% inspection before these brass fire hydrant adapter leave our factory, if you have any problem with these products after you receive them, please feel free to contact us, we will give you a solution..
Check Stock

Happy Tree 2" NPSH Fire Hose Nozzle Brass Fire Equipment Heavy Duty Industrial Fog Nozzle

  • ...es consistent volume at any spray angle. Constant flow fog nozzle capable of complete shutoff, straight stream or any degree of conical fog. Maximum 100 psi pressure (water only) at ambient temperature (70 degree F). Flow Rate 108 gpm.
  • 【Multipurpose Use】Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • 【Premium Material】Brass stem for resistance to corrosion. Excellent watering equipment. 2" cast brass adjustable fog nozzle.
  • 【Quality Warranty】We did 100% inspection before these brass fire equipment leave our factory. if you have any problem with these products after you receive them, please feel free to contact us, we will give you a solution immediately.
Check Stock

DOZYANT 2 Feet Y Splitter Two Hose Low Pressure Propane Regulator Connection Kit for Most LP LPG Gas Grill, Heater and Fire Pit Table, Fit Type 1 (QCC-1), 3/8' Flare Swivel Fitting

  • With DozyAnt hoses you can hook up to Two Propane Appliacnes in the DozyAnt Regulator /Maximum 80000BTU per hour – low pressure propane regulator with TWO 2 feet fiber reinforced hoses for propane grill and fire pit table..
  • The hose measures 2 feet. PER HOSE long and fits type-1 (QCC-1) tank connections.
  • Hassle Free – Regulator and hose ready to use out of box.
  • Long Lasting High Quality Material – Provides secure, air-tight connection between grill or fire pit and tank.
  • 3/8-inch flare fitting has an outside diameter of 5/8 inches in order to accommodate for the flare seat..
Check Stock

EXCELFU LP Propane Gas Fire Pit Stainless Steel Burner Ring Installation Kit, 12 inch

  • Fire Pit Burner Ring: 12 inch round fire ring with 1/2 inch female gas inlet, rated for up to 150,000 BTUs. Made of durable #304 stainless steel for maximum rust resistance and long lifespan..
  • Stylish Design: New cross-bar design for better gas distribution and made your fire pit enjoyable..
  • Safety&Secure Connection: Fiber reinforced propane hose with solid brass fittings for corrosion resistance, ductility at high temperatures and prodive airtight sealing..
  • Easy Installation: CSA Certified 5 feet connect hose and 5 feet propane hose with type-1 (QCC-1) propane tank connections. Long extension hose meet your needs for fire pit installation..
  • Buy with Confidence: Every propane fire pit kit is backed by 18-month warranty. If you are not satisfied with your purchase, just contact with us and our Customer Service Team will help you..
Check Stock

Vent Systems 4\ inch Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate For Cooling Heating Ventilation System HVAC 4\ inch - Pack of (1)

  • ...ICATIONS - The 3 inch flexible hose is designed aluminum and PVC thermoplastic constructed flexible ventilation ducting according to your HVAC, dryer, grow rooms or tents.
  • 4-LAYER DEISGN: Our 3 inch vent hose features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant, the outer layer adopts black dual PVC thermoplastic that protects the aluminum from cuts and tears while preventing leakage.
  • EASY INSTALL & CUSTOMIZE YOUR USE LENGTH - The aluminum 3 inch dryer vent hose could be easily cut by wire cutters, and cut any length according to your needs. Two 3-inch clamps make the installation a breeze.
  • WIDELY APPLICATIONS - The 3 flexible duct usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other installations. it also can be as ac exhaust hose and dryer vent hose.
Check Stock

Sharawy Hookah Africano w/ice Chamber

  • Copper return pipe preventing any internal corrosion.
  • All hookahs come in a portable box containing all accessories including tongs, Tray, bowl, glass base, WASHABLE Silicone hose, all gromits, and....
Check Stock

MSR Lowdown Remote Camping and Backpacking Stove Adapter

  • Sizes: Each "one cubic foot" box will contain approximately 150 to 160 pieces of our hand cut 11 1/2" long kindling, will light approximately 25 to 30 fires. We recommend using 5 to 7 sticks and your favorite tinder to start your fire, then add dry firewood..
  • All Natural: Our Incense-Cedar Fire Starter Kindling is 100% all-natural, sun dried fire-starter kindling, harvested from dead standing or downed cedar trees. Internal resin allows it to light easily and is a great fire starter. Enjoy the wonderful aroma of 100% all-natural incense cedar!.
  • Uses: Our incense-cedar fire starter Kindling will arrive to you bone-dry for fast and easy lighting! Perfect for campfires, indoor fireplaces, beachside fire pits, outdoor stoves, and more - just add our incense cedar kindling as the "base" to your logs, charcoal, or firewood..
  • Safety: Avoid injury from using an axe to cut your own kindling..
Check Stock

3Inch Flexible Ducting Hose 16.5 feet Black Aluminum Ducting Dryer Vent Hose with 2 Screw Clamps for Heating Ventilation Air Conditioning (HVAC), Boat Blower, Exhaust Grow Tents

  • ...ICATIONS - The 3 inch flexible hose is designed aluminum and PVC thermoplastic constructed flexible ventilation ducting according to your HVAC, dryer, grow rooms or tents.
  • 4-LAYER DEISGN: Our 3 inch vent hose features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant, the outer layer adopts black dual PVC thermoplastic that protects the aluminum from cuts and tears while preventing leakage.
  • EASY INSTALL & CUSTOMIZE YOUR USE LENGTH - The aluminum 3 inch dryer vent hose could be easily cut by wire cutters, and cut any length according to your needs. Two 3-inch clamps make the installation a breeze.
  • WIDELY APPLICATIONS - The 3 flexible duct usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other installations. it also can be as ac exhaust hose and dryer vent hose.
Check Stock

Gas One 2106 3 ft Regulator Fire Pit Grill Heater Propane Hose, 3 feet

  • ✓ A TOP QUALITY PROPANE REGULATOR AND HOSE - maxing out at 80, 000 BTU, this 3Ft low pressure propane regulator is fiber reinforced to ensure quality performance. The hose is the perfect fit for a wide variety of grills, fire pit tables, and other propane appliances.
  • ✓ LONG LASTING AND DURABLE - Gas One’s 2106 Low Pressure Propane Regulator provides an air-tight connection for your propane appliances. Made with high quality rubber and brass connections, the 2106 ensures a stable connection and a leak-free experience.
  • ✓ MEASUREMENTS- The 2106 Propane Hose measures at 3ft long (91. 4cm) and is made to have a secure fitting with type-1 (QCC-1) propane tank connections. The hose has an inside ⅜-inch flare fitting and has an outside diameter of ⅝ inches.
  • ✓ READY FOR US - The low pressure hose is ready to use right out of the box and requires no additional tools to set up. Simply connect the regulator to the tank and appliance when ready to use.
Check Stock