Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board
- Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
- Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
- Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
- This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..
Check StockHasbro Family Game Night 4: The Game Show Edition (PS3)
- Plug and play. Multi-console support: Compatible with PS3/PS4/PC.
- No timeout issue: No annoying 8-minute timeout issue on PS4. Turbo function support.
- Upgrade firmware via USB. SOCD cleaner support.
- PS4 controller touchpad click emulation: LS, RS, DP Emulate.
- XInput support. NOTE: NOTE: PS4 firmware update to 3.11 disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using..
Check Stock
Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 5
- 【Super Quiet】The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (.
- 【Widely Application】Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 5,Ender 5 Pro 3D printer. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website..
- 【Driver】TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled..
- 【Update Firmware Method】Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process..
- 【After Sale Service】Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours..
Check StockBrook PC PS3 PS4 Fight Board Fighting DIY Kit Turbo Rapid Fire Function
- Plug and play. Multi-console support: Compatible with PS3/PS4/PC.
- No timeout issue: No annoying 8-minute timeout issue on PS4. Turbo function support.
- Upgrade firmware via USB. SOCD cleaner support.
- PS4 controller touchpad click emulation: LS, RS, DP Emulate.
- XInput support. NOTE: NOTE: PS4 firmware update to 3.11 disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using..
Check Stock
BIGTREETECH SKR PICO V1.0 Control Board: Mini Controller Board with TMC2209 UART Stepper Motor and Raspberry Pi Online Printing for Voron V0 V0.1 3D Printer Parts
- 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
- 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
- And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V..
- 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing..
- 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion.
- at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer..
- 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port..
Check StockSniper Elite III - PlayStation 3 Standard Edition
- Fast, accurate and stable. Designed by pro FPS gamers.
- Exquisite UI design. Super easy to use. Online storage..
- No original controller need for revification.Please check the compatibility of the product at the brook official web site before you place the order because NOT all the brand or models of the controllers / wheel / Joystick are compatible with the brook adapter..
- Hot swapping. Firmware upgradable. NOTE: The latest PS4 firmware update disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using. With Gam3Gear Keychain..
- BrookSniper App: available in App Store/Google Play. Exquisite UI design. Super easy to use. Real-time applying with blue-tooth devices. Optimized config for popular games. Online storage..
Check StockCreality Ender 3 V2 Upgrades V4.2.7 Silent Board 32 Bit Silent Mainboard with TMC2225 Drivers Compatible for Creality Ender 3 Ender 3 Pro Ender 5 Ender 5 Pro 3D Printer
- NOTE: If you want to install this V4.2.7 silent motherboard on the printer, you need to flash the motherboard firmware to work properly. You can....
- Firmware Pre-Installed Only for Ender3 V2 - Marlin 2.0.1 and firmware(not BLTouch version) for Ender-3 V2 comes pre-installed on this board. If your....
- Update the Motherboard Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the....
- Noiseless - TMC ultra-slience chip, effectively eliminates noise. Low-decibel operation keeps the motherboard running. Using high-quality MOS tube,....
- High Performance - Equipped with STMicroelectronics 32-bit MCU, which brings a new experience. Connect to temperature sensor via smart fanEnable....
Check StockJabra Evolve 65 Ms Mono
- Jabra Headset Made For Voice & Music, Optimized for MS Lync, Teams with Bluetooth connectivity. Upgrade and update software firmware using the Jabra Direct app on you PC or Mac.
Check StockChiTu L V3 Control Board for Creality LD-002R/Anycubic Photon with 32-bit ChiTu Motherboard 3D Printer Integrated Controller Only Board sharp04 firmware
- ✔ Meaning of Material Options: FIRMWARE LCD PANEL(6.08 mono firmware/5.5 mono firmware/sharp04 firmware), you need to update the corresponding....
- ✔ Better Integration: ChiTu motherboards have better integration and are more convenient and simple to use..
- ✔ Offline System + 2K Resolution: Making printing more efficient. STM32fF407 + FPGA, completely independent design. Support image HD outpot..
- ✔ Perfect with CHITUBOX: A free-processing software with powerful tools and the biggest user volume for resin printer..
- ✔ Customer Support: Please note that this product usually takes 7-12 days to be delivered by free delivery. We provide 24-hour customer service,your....
Check StockGESD 8 Channel Video Data Fiber Optic Media Converter FC Singlemode Transmission Distance 20Km for Analog CCTV Surveillance Security System (1Pair Interface BNC coaxial Conversion Transmitter)
- ...ls of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire CCTV Cameras monitoring system with a security fence..
- 【100% Satisfaction Guarantee】30-day Money-Back Guarantee with 1 Year Warranty, Lifetime Tech Support and hardware warranty, Free firmware upgrade support and free technical support for long-term assurance..
Check Stock
Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer
- ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
- ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
- ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
- ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
- ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check StockIoT-Turbo Data SIM Card 3-in-1 Kit | Nationwide 4G LTE Coverage Based on AT&T Backbone Network |No Contract or Activation Fee Compatible with IoT Devices, GPS Tracker, 4G Hunting Camera, 4G LTE Router
- Plug and play. Multi-console support: Compatible with PS3/PS4/PC.
- No timeout issue: No annoying 8-minute timeout issue on PS4. Turbo function support.
- Upgrade firmware via USB. SOCD cleaner support.
- PS4 controller touchpad click emulation: LS, RS, DP Emulate.
- XInput support. NOTE: NOTE: PS4 firmware update to 3.11 disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using..
Check StockSEGA Dreamcast Vibration Pack
- Note: please don't upgrade the firmware, it is the latest firmware version, and it will be permanently bricked if you upgrade the firmware.(Don't operate with power during installation.Please read the product instructions carefully before use.Didn't with standoffs.Thanks).
- Replace your faulty GDROM Drive with a Solid State Optical Drive Emulation Board.(Now we have customized box to packaging products to increase quality demand).
- Easy to install, the original optical drive seat can be removed and replaced with GDEMU, no welding, no modification to the machine board..
- Only suitable for VA1 motherboard DC Game machine, otherwise will damage GDEMU and do not plug in or pull with electricity.
- 100% compatible with game, perfect running original GDI image, and compatible with CDI image..
Check Stock
