Best Fish Tank Seachem Prime
Seachem 437 Prime Fresh and Saltwater Conditioner - Chemical Remover and Detoxifier 1 L
- POWERFUL TREATMENT: Seachem Prime is a complete and concentrated conditioner for both freshwater and saltwater fish tanks, working hard to remove chlorine and chloramine..
- REMOVER: Seachem Prime immediately and permanently removes chlorine and chloramine, successfully allowing the bio filter to remove ammonia, nitrite, and nitrate while they are detoxified for 48 hours..
- DETOXIFIER: Seachem Prime effectively detoxifies ammonia, nitrite, and heavy metals found in the tap water at typical concentration levels, providing a safe environment for your betta, tetra, or other fish..
- USE: Use 1 capful (5 mL) of Seachem Prime for each 200 L (50 US gallons) of new or replacement water. For best results, add Seachem Prime to new water first. For exceptionally high chloramine concentrations, a double dose may be used safely. For smaller volumes, use 2 drops per gallon..
- SAFETY: In case of an emergency, the 5x dose of Seachem Prime may be used for both ammonia and nitrite. Use a ½ dose if the water temperature is > 30°C (86°F) and chlorine or ammonia levels are low..
Check StockSeachem Prime Fresh and Saltwater Conditioner - Chemical Remover and Detoxifier 16.9 fl. oz
- POWERFUL TREATMENT: Seachem Prime is a complete and concentrated conditioner for both freshwater and saltwater fish tanks, working hard to remove chlorine and chloramine..
- REMOVER: Seachem Prime immediately and permanently removes chlorine and chloramine, successfully allowing the biofilter to remove ammonia, nitrite, and nitrate while they are detoxified for 48 hours..
- DETOXIFIER: Seachem Prime effectively detoxifies ammonia, nitrite, and heavy metals found in the tap water at typical concentration levels, providing a safe environment for your betta, tetra, or other fish..
- USE: Use 1 capful (5 mL) of Seachem Prime for each 200 L (50 US gallons) of new or replacement water (each cap thread is approximately 1ml). For best results, add Seachem Prime to new water first. For exceptionally high chloramine concentrations, a double dose may be used safely. For smaller volumes, use 2 drops per gallon..
- SAFETY: In case of an emergency, the 5x dose of Seachem Prime may be used for both ammonia and nitrite. Use a ½ dose if the water temperature is > 30°C (86°F) and chlorine or ammonia levels are low..
Check StockSeachem Pond Prime Water Conditioner - Chemical Remover and Detoxifier 2 L
- CONDITIONER: Seachem Pond Prime is a complete conditioner that works to provide essential ions and stimulates natural slime coat in any pond..
- REMOVER: Use 1/8 cup (2 tablespoons) of Seachem Pond Prime for each 600-700 US gallons to successfully remove chlorine or chloramine from your fish’s environment..
- DETOXIFIER: Seachem Pond Prime will detoxify any ammonia or nitrite produced by fish that live in your pond. To detoxify high concentrations of ammonia or nitrite, use 1/4 to 1/2 cup for each 600 gallons..
- USE: If you are setting up a new pond, adding, or changing water, then Seachem Pond Prime should be the first choice conditioner to create and control a safe pond environment..
- SAFETY: To detoxify nitrite in an emergency, up to 5 times the normal dose of Seachem Pond Prime may be used. If the water temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose..
Check StockCarhartt Men s Lightweight Hiker SteelToe Industrial Boot Black Mesh and Synthetic 12 W US
- POWERFUL TREATMENT: Seachem Prime is a complete and concentrated conditioner for both freshwater and saltwater fish tanks, working hard to remove....
- REMOVER: Seachem Prime immediately and permanently removes chlorine and chloramine, successfully allowing the bio filter to remove ammonia, nitrite,....
- DETOXIFIER: Seachem Prime effectively detoxifies ammonia, nitrite, and heavy metals found in the tap water at typical concentration levels, providing....
- USE: Use 1 capful (5 mL) of Seachem Prime for each 200 L (50 US gallons) of new or replacement water. For best results, add Seachem Prime to new water....
- SAFETY: In case of an emergency, the 5x dose of Seachem Prime may be used for both ammonia and nitrite. Use a ½ dose if the water temperature is >....
Check StockSeachem Pond Prime Water Conditioner - Chemical Remover and Detoxifier 20 L
- CONDITIONER: Seachem Pond Prime is a complete conditioner that works to provide essential ions and stimulates natural slime coat in any pond..
- REMOVER: Use 1/8 cup (2 tablespoons) of Seachem Pond Prime for each 600-700 US gallons to successfully remove chlorine or chloramine from your fish’s environment..
- DETOXIFIER: Seachem Pond Prime will detoxify any ammonia or nitrite that live in your pond without causing a pH drop. To detoxify high concentrations of ammonia or nitrite, use 1/4 to 1/2 cup for every 600 gallons..
- USE: If you are setting up a new pond, adding, or changing water, then Seachem Pond Prime should be the first choice conditioner to create and control a safe pond environment..
- SAFETY: To detoxify nitrite in an emergency, up to 5 times the normal dose of Seachem Pond Prime may be used. If the water temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose..
Check StockSeachem Prime Water Conditioner, 2 Liter
- The Kaytee Water Bottle Holder is the universal-fit bottle bracket that attaches to any type of cage. The Water Bottle Holder slides onto wire cages, hangs on any aquarium, or attaches to wooden walls with a screw..
- It also detoxifies ammonia by converting ammonia into a safe, non-toxic form to be removed by the tank?s biofilter. It also detoxifies nitrite, nitrate and heavy metals found in tap water..
- Use non-acidic Seachem Prime at start-up, tank cycling, or when adding or replacing water. Ingredients: Proprietary aqueous solution of complexed hydrosulfite salts..
- May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal..
- Prime your aquarium with Seachem Prime. This complete, highly concentrated conditioner for fresh and saltwater removes chlorine and chloramine..
Check StockSeachem Stability - For Freshwater and Marine Aquariums 250ml
- TANK STABILIZATION: Seachem Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome"..
- TREATMENT: Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate..
- BACTERIA GROWTH: The necessary conditions for the growth of Stability's bacterial strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the unknown death of an organism), Stability simply becomes more effective..
- USE: Shake Seachem Stability well before use and turn off UV/ozone filter. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as the dosage is maintained for 7 days..
- SAFE: The bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of overuse..
Check StockSeachem Stability Fish Tank Stabilizer - For Freshwater and Marine Aquariums, 16.9 Fl Oz (Pack of 1)
- TANK STABILIZATION: Seachem Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome"..
- TREATMENT: Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate..
- BACTERIA GROWTH: The necessary conditions for the growth of Stability's bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the unknown death of an organism), Stability simply becomes more effective..
- USE: Shake Seachem Stability well before use and turn off UV/ozone filter. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as dosage is maintained for 7 days..
- SAFE: The bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of overuse..
Check StockSeachem ParaGuard 500 mL / 16.9 fl oz - 603
- TREATMENT: ParaGuard contains a proprietary blend of aldehydes, malachite green, and fish protective polymers destroys parasites,external fungal,....
- SAFE: ParaGuard is the only fish and filter safe aldehyde based parasite control product available (for parasites on fish)..
- EFFECTIVE: Seachem's ParaGuard effectively and efficiently eradicates many ectoparasites including ich and external fungal, bacterial, and viral....
- USE: ParaGuard is used for treating a variety of parasitic infections of exotic fish. It is particularly useful in hospital and receiving tanks for....
- DIRECTIONS: Remove all invertebrates from the tank as well as any chemical filtration. Use 5 mL (1 capful) of ParaGuard for every 40 L (10 US....
Check StockSeachem Purigen 4 Liters Model 169
- FILTRATION: Purigen ranges in color from almost white (cream) to light yellow. Seachem Purigen is not a mixture of ion exchangers or adsorbents, but a....
- SELECTIVITY: Seachem Purigen is an organic filtration resin that works hard to remove nitrogenous compounds and waste produced by fish, corals, and....
- CAPACITY: Being both spherical and macroreticular, Seachem Purigen has microscopic pores that increase its usable surface area to many times that of a....
- REGENERATION: Once Seachem’s Purigen is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn....
- SAFETY: Some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of bleach/chlorine is....
Check StockSeachem Purigen 2 Liters Model 168
- FILTRATION: Purigen ranges in color from almost white (cream) to light yellow. Seachem Purigen is not a mixture of ion exchangers or adsorbents, but a....
- SELECTIVITY: Seachem Purigen is an organic filtration resin that works hard to remove nitrogenous compounds and waste produced by fish, corals, and....
- CAPACITY: Being both spherical and macroreticular, Seachem Purigen has microscopic pores that increase its usable surface area to many times that of a....
- REGENERATION: Once Seachem’s Purigen is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn....
- SAFETY: Some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of bleach/chlorine is....
Check StockSeachem Purigen Organic Filtration Resin - Fresh and Saltwater 1L 167
- FILTRATION: Purigen ranges in color from almost white (cream) to light yellow. Seachem Purigen is not a mixture of ion exchangers or adsorbents, but a....
- SELECTIVITY: Seachem Purigen is an organic filtration resin that works hard to remove nitrogenous compounds and waste produced by fish, corals, and....
- CAPACITY: Being both spherical and macroreticular, Seachem Purigen has microscopic pores that increase its usable surface area to many times that of a....
- REGENERATION: Once Seachem’s Purigen is exhausted, it can be regenerated with a solution of bleach and water. The bleach will literally “burn....
- SAFETY: Some slime coat products may permanently foul Purigen and render regeneration difficult. Do not reuse if odor of bleach/chlorine is....
Check StockSeachem Flourish Advance Growth Supplement - Aquatic Plant Aid 500 ml
- ENHANCER: Seachem Flourish Advance is an advanced formula that contains phytohormones, minerals, and nutrients that dramatically stimulate the growth....
- GROWTH: The phytohormones play crucial roles in regulating plant growth in a wide range of developmental processes, including cell division, formation....
- ADVANCED FORMULA: With regular use, Seachem Flourish Advance enhances mineral absorption and improves disease resistance. During the first ten to....
- USE: Shake well before using Seachem Flourish Advance. Use 1 capful (5 mL) for every 80 L (20 US gallons) and be sure to dose daily or as required to....
- SAFETY: Seachem Flourish Advance is non-toxic and completely safe for all plant varieties as well as for fish, shrimp, and other aquatic organisms..
Check Stock