Categories

Best Fitting Of Copper

Pure Copper Pitcher 70 oz 2 Liter Handcrafted Water Jug & Copper/Brass Lid Raw Interior for For Ayurveda Health

  • HANDCRAFTED BY EXPERT ARTISANS: Our elegant PURE copper pitchers and tumblers are all hand made by skilled artisans using time-tested techniques that....
  • 100% PURE COPPER: Made for true enthusiasts, we don't use any nickel, tin or other metals in the construction of our copper pitchers and tumblers.....
  • COPPER LID WITH BRASS KNOB INCLUDED: Keep your drinks fresh and pests away with our perfect fitting copper lid. Great for both outdoors and indoors.....
  • INTERIOR TARNISH IS NORMAL!: Our copper products are constructed with no inside liner / coating, our pitchers and cups promote the ayurvedic health....
  • LIFETIME WARRANTY: We stand behind everything we sell! If our product every lets you down, and we will replace it or provide a refund. We couldn't do....
Check Stock

Amici Home Collection Ashby Copper Metal Storage Canister 70 oz Large Black/Gold

  • Food storage - safely stores your Large food items thanks to durable construction and a tight-fitting lid with a silicone gasket. This food safe metal....
  • Vintage design - the Ashby copper collection features a contemporary look with a hammered, black matte metal surface on a round body with copper....
  • Great capacity - measuring 5. 25” D x 8” H, this metal Canister can hold up to 70 ounces..
  • Function and fashion - the copper colored finish on the lids adds to the sleek design of each Canister in this collection with matching copper knobs..
  • Care Instructions - it is recommended that this Canister be hand washed with care..
Check Stock

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

  • Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
  • Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
  • T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
  • Sil-flo is not recommended for ferrous metals such as iron or steel.
Check Stock

UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting

  • Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...ssion sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nu....
Check Stock

Cole-Parmer-3121270 Compression Ferrule and Nut Assembly, for 1/4\ OD, Brass

  • This Joywayus compression fitting is made of brass..
  • Connects to 4mm copper,brass,aluminum,or plastic tubing..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Check Stock

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • ...ater compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule....
Check Stock

Water Cooling Block 50x50mm Copper Base for Liquid Water Cooler Heat Sink System for GPU Heatsink

  • 2 holes on the side of the cover, the water flows from the side..
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • ...e puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fa....
Check Stock

WeldingStop 9-8215 9-8210 SL60 SL100 Plasma Torch Electrode Nozzle 60A Tip for Thermal Dynamics Cutmaster 52 SL60 Consumables PKG/10 [Hafnium & Copper Electrode 9-8215]

  • ✓Use Hafnium wire and Copper to make 9-8215 electrodes——The electrode uses hafnium wire and copper as the main materials. Unlike other products on the market that use cheap Pickaxe wire. the service life of the electrode using hafnium wire is longer than other electrodes using pick wire.
  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 / 102 / 152 Cutter SL60 / SL100 Torch；These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 5pcs 9-8215 electrodes and 5pcs 9-8210 standoff tips WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 60A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

Brace for Impact

  • Back support with high-quality, copper-infused fabric designed for maximum comfort and mobility.
  • Provides lower back support and targeted relief.
  • Adjustable straps for form-fitting compression.
  • Contoured, slim and lightweight design fits discreetly under clothes.
  • Copper ions bound to the fiber level during manufacturing help reduce odors.
Check Stock

Parker A-Lok 4NU4-B Brass Compression Tube Fitting, Nut, 1/4\ Tube OD

  • Nut tightens and provides compression on the ferrule of a flareless fitting.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • For use with a twin ferrule compression fitting set for a leak-resistant seal in high-pressure applications.
Check Stock

Legris 0105 08 17 Brass Compression Tube Fitting, Connector, 8 mm Tube OD x 3/8\ BSPT Male

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to tubing on one end and has a BSPT male connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Ferrule compression fitting for a leak-resistant seal.
  • For use with copper, nylon, or plastic tubing.
Check Stock