Categories

Best Fitting Screw Thread

Artiwell Trip Lever Tub Trim Kit Set With Trip Lever Overflow Face Plate, Trip Lever Bathtub Drain with Strainer, Overflow and Matching Screws (BRUSHED GOLD)

  • ...your faucet and the rest of your bathroom décor..
  • HIGH QUALITY MATERIAL: Durable brass drain construction provides strength and durability to this bath tub drain trip lever trim kit with overflow plate, Corrosion-Resistant Finish..
  • STANDARD DESIGN: Designed to fit most tub and baths with the threaded adapter bushing fitting 1-1/2 inch ,1-3/8” inch and 1-7/8” in bath shoe sizes. This Drain can fit both 1-1/2" coarse thread and 1-3/8" fine thread Drain Shoe Sizes. Screw the brass adapter bushing on the Bath drain , the diameter is 1-13/16" , can be fit 1-1/2" coarse thread. Screw the brass adapter bushing off the Bath drain ,the diameter is 1-5/8" , can be fit 1-3/8" Fine thread..
  • FULL ACCESSORIES PROVIDED: Trip lever faceplate with 2 screws , Beehive strainer with screw, 1-3/8 in. Npsm (1-5/8 in. - 16 UNC) fine thread strainer body, 1-1/2 in. -11. 5 in. Npsm coarse thread adapter bushing, strainer washer and Brass Pin for connect the overflow faceplate and linkage(not included)..
  • TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all of our products are produced to regional, national industry standards. We are proud of the products we sell, you will be too..
Check Stock

HANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines

  • You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
  • Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
  • The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
  • Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
  • Convenient to Use: the thread seal tapes are convenient to use.
  • Just clean the 2 threaded connections that need to be sealed.
  • Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
  • And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
  • Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
  • If the thread sealing is not good, you can increase the thickness of the tape.
Check Stock

M MINGLE Pressure Washer Coupler, Metric M22 15mm Male Thread to M22 14mm Male Fitting, 4500 PSI

  • Convert metric M22 15mm male thread to M22 14mm male fitting. M22 15mm is not standard screw fitting and fit electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz..
  • Universal pressure washer coupler connects power washer gun to hose. Fits many brands of pressure washer gun and hose with M22 15mm fitting..
  • Made of high quality brass, resistance to corrosion..
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

1/4\ -20 x 1-1/2\ Hanger Bolts, 8 pack

  • Machine Screw Thread Length: 17mm / 0.67".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

Seymour STR-662 1\ STA-LOK Repair Kit

  • Easy to use,convenient to operate,saves effort and time in use..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiator, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
Check Stock

Rectorseal 23710 1-3/4-Ounce Tube T Plus  Pipe Thread Sealant , White

  • HIGH QUALITY:Thread seal tapes are made of PTFE which has a good sealing capability and can resistant corrosion. Plumbing pipe tape also has a good performance towards moisture and acids, they will not crack easily..
  • PACKAGE CONTENT:Each package include 30 rolls of thread seal tapes, size :1/2" in width, 393" long(10m ) each roll, 984ft in total. Enough for you to use a long time. You needn't have to buy again and again..
  • GOOD PACKAGE:Each roll of teflon tape has a plastic cover which can protect the tape from dust, when you finished your work, just place them back to the plastic cover, it is a better way to collect them compared to normal thread tape without plastic cover..
  • EASY TO USE:When you want to use them, just take out the tape from the plastic package, and wrap it around the tape or air head or some other thing that need this sealant tape, and then screw it in. As it is not sticky, so it is also easy fro you to remove them..
  • WIDE APPLICATION:Plumbers thread tape can be widely used not only in our home but also in industrial and commercial. They are suitable for leak water, plumbers, air head, air fitting, air compressor, thread pipe and other kind of things..
Check Stock

The Hillman Group 491410 Hanger Bolt, 8-32 X 1-1/2-Inch , 8-Pack

  • Machine Screw Thread Length: 22mm / 0.87".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

Aluminum Metal Fiber Optic 3 Dot Sights Front and Rear Red Green Dot for Taurus G3C New G3 G3X GX4 Toro Tool

  • Fiber Optic Front and Rear sights Customized For Taurus G3C New G3 G3X GX4.
  • The sights comes with 2 fiber optic rods in green, red so you can use any combination of color that you prefe.
  • They are machined from tough Aluminum Alloy and hard anodized and provide outstanding contrast in daylight..
  • The sight set comes with a new screw for the front sight.
  • The front sight is held in with a screw and thread locker and no sight pusher is used in the installation. The tools needed include a flat blade screwdriver, a Torx T-8 driver, thread locker, nail clippers or a side cutter, and a lighter or matches to install the fibers into the sight. Minor fitting of the front sight is usually required (For example- filing using needle files or similar).
Check Stock

50pcs Helical Threaded Inserts Stainless Steel Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 1.5D Length

  • WIDELY USED:Stainless steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • USED FOR PARTS:Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • A CERTAIN ELASTICITY:Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resista.
  • ADVANTAGE :It can prevent screw from getting loose, especially used for products requiring high coefficient of insurance..
  • EASY TO MAINTENANCE:Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
Check Stock

E-Z LOK 319-4 Insert 1/4-20 Int. Coarse Thd., 3/8-16 Ext. Thd., .375 Lg., Thinwall, Steel

  • Important Parameters: Size: M6(inner diameter) x 1.0(installed pitch) x 3D(installed length=3*6mm=18mm), outer diameter: 7.6mm(Min.).
  • 7.9mm(Max.), suitable drill bit diameter is 6.3mm..
  • Function: Steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • Easy to Maintenance: Install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • Excellent Performance: Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance..
  • Usage Scenario: These threaded inserts are Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread. It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
Check Stock

Thread Repair Tool Stainless Steel 20Pcs Rethreading Tap Set for Female Thread Repairing Insert Sleeve

  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
  • Easy to use,convenient to operate,saves effort and time in use..
Check Stock

100pcs Stainless Steel SS304 Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 2D Length for Helical Repair

  • Helicoil thread repair kit is easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • The steel thread inserts can effectively improve screw connection, greatly improving the reliability..
  • M8 helicoil is suitable for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • Helicoil m8x1.25 can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
  • Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage..
Check Stock

Antrader Universal M6 Thread Decorative License Plate Frame Bolts Screws Aluminum Alloy for Car Motorcycle Orange, 24pcs

  • Screw Thread Dia: 6mm/ 0.24inch, 24Pcs License Plate Bolt Screws. Fits all vehicles cars, biker trailers, etc. Universal fitting set..
  • Can be used as Windscreen Bolts, license Plate Bolts etc. High quality and easy to install..
  • The screws and lock-nuts made of high quality Stainless Steel for license plates and frames. Rust Resistant, will never rust..
  • Not just for cars but also can decor your motorcycle , trucks or any 6mm thread diameter bolts on your auto..
  • It will make your car different from other cars, catching everybody's eye on the road..
Check Stock