Categories

Best Fitting Tool

VANICE Bike Freewheel Removal Repair Lockring Tool, Compatible with Shimano, Sunrace and Other 12 Spline Freewheels

  • Good Compatibility - Compatible with Shimano, Sun Race, Saches and other similar 12 spline freewheels. Not compatible with cassette lock rings.
  • High Quality - Heat treated alloy tool steel construction for a lifetime of use.
  • Easy To Use - Use any ½” drive ratchet or 21mm spanner wrench to rotate the tool (open end wrench, crescent wrench etc).
  • VANICE Professional and pratical bike bicycle freewheel remover tool. Thin wall construction allows use without removal of cones and locknuts.
  • CASSETTE OR FREEWHEEL? To determine the type of rear sprocket system you have, find the tool fitting on the sprocket set. Spin the sprockets backwards. If the fitting spins with the cogs, it is a cassette system. If the tool fitting does not spin with the cogs, it is a freewheel system.
Check Stock

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

  • 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
  • 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
  • 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
  • 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
  • 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....
Check Stock

Apollo Stainless Steel Crimp Clamp Tool - 1 Each

  • ICP-PC01 Pinch Clamp Removal Tool is specifically designed to remove Stainless Steel Pinch Clamps (not included) in the event of a mistake or need for a modification..
  • Compatible with any brand of stainless steel pinch clamps designed for use with PEX. Also ideal for removal ear clamps with Max. ear width 13mm..
  • Compound action cutting tool: maximum mechanical advantage for easier and safer use. High mechanical advantage makes clamp removal easier and reduces the risk of strain injury..
  • Designed to deliver many cutting cycles without loss of performance, using the lowest practical cutting force. Constructed of solid metal for long tool life, with textured grips for a more secure hold. Cinch clamp removal tool to be used in conjunction with the cinch rings to remove PEX cinch clamp rings. The tool provides a fast and quiet solution to removing PEX fittings and can be used in both home and commercial settings. Safely cuts PEX stainless steel clamps for quick fitting salvage..
  • A fitting that has been removed and is in good shape can be used in another system saving money. Avoid clamping on the insert ribs or barbed area, which will damage the fitting making it unusable. Ideal for stainless steel and steel clamps from Apollo, Oetiker, Watts, etc..
Check Stock

Kalolary 2Pcs Drip Irrigation Tubing Hole Punch, Drip Tube Hole Punch Tool Outdoor Drip Irrigation Pipe Hand Punch for 16/20mm PE Pipe Opening Hole Punch

  • Sturdy and Durable - Made of high quality plastic, this punch is durable, stable and rust. And the puncher has been polished so it will not become dull and can be used for a long time..
  • Size - Suitable for PE pipes with a diameter of 16/20/25mm, punches holes measuring 3 mm (0.118 Inches), proper size can make sure that sprinklers can snug fit on the tubing for minimizing waste..
  • 2-In-1 Punch and Fitting Insert - Our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use,ergonomic design, easy to operate..
  • How to use - Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole.
  • Package - You will receive1 professional punch tool, 1 2 in 1 punch and accessory inserts. Good tools for gardening and irrigation,sufficient quantity for your daily using..
Check Stock

DEWHEL Replacement for IPR Valve Air Test Fitting Tool Ford 6.0L Powerstroke Diesel High Pressure Oil System

  • 6.0L Powerstroke Diesel High Pressure Oil Pump IPR Valve Air Test Fitting Tool --6.0L Powerstroke IPR Air Test Fitting Tool.
  • NO Scan tool or IPR driver tool is required - potentially lower tool investment.
  • Fit for 2003-2010 F-250 / F-350 / F-450 / F-550 - - - Super Duty 6.0L V8 Diesel Turbocharged.
  • Fit for 2004-2010 E-350 / E-450 - - - 6.0L V8 Diesel Turbocharged.
  • Firt for 2003-2010 Excursion - - - 6.0L V8 Diesel Turbocharged.
Check Stock

Freeman PSTHSWV 1\ Aluminum Pneumatic Tool Hook with 1/4\ Industrial Swivel Fitting

  • 6" long l-shaped tool hanger provides 1" clearance so you can easily hook it on belt loops, pockets, tool belts, or rafters to free up your hands on the jobsite.
  • Includes a 1/4" industrial 360º swivel fitting for easy installation.
  • Compatible with any brand or type of pneumatic air tool with a 1/4" NPT fitting.
  • Lightweight and durable aluminum construction.
  • Adjustable hook rotates so you can hang your tool anywhere whether you are right or left handed.
Check Stock

SKYFOOST 4 Pcs PVC Bulkhead Fitting, 3/4 Inch Male 1/2 Inch Female Water Tank Connector with Plugs, Bulkhead Tank Fitting with 2 Rubber Ring Stablizing for Rain Barrels, Aquariums, Water Tanks (4)

  • PROFESSIONAL WATER TANK CONNECTOR: It's difficult to find a bulkhead fitting kit that works consistently well with a wide range of water tanks. Thankfully, this new 3/4 Inch Male 1/2 Inch Female bulkhead fitting with a thick silicone seal gasket will create a better tight seal. Quality bulkhead water fitting can be very convenient for your daily life..
  • MORE EFFICIENT THAN OTHER WATER TANK CONNECTOR: Looking for the best bulkhead fitting? Our bulkhead fitting 3/4 inch is a must-have tool for breezy, rustic Irrigation work. This professional bulkhead fitting is robust, durable, and It even comes with a plug to help you seal the water tank. Each bulkhead fitting barbed quality PVC material, which is colorfast and durable, and lasts longer than ordinary plastic fittings, and comes with two thick silicone gaskets for better sealing performance..
  • EASY INSTALLATION WATER TANK FITTINGS: Get outstanding results with our PVC bulkhead fittings. Each PVC bulkhead fittings tool takes the hassle out of the rain barrels, water tanks installation, and renovation. First, you need to drill a 25-26mm hole for installation and then assemble the Water Tank Connector and plug connector, ....
Check Stock

10 Foot Long Dust Collection Power Tool Hose Kit for Multiple Types/Brands of Power Tools and Work Shop Vacuums with Threaded Fittings

  • The smaller diameter 1-3/16" O.D. (Outside diameter) flexible dust collection power tool hose moves freely when connected to your power tools and vacuum. This gives you the ability to plug into different tools to add dust collection at a moments notice. The hose and its specialized fittings work with multiple power tools, workshop vacuums, jigs and other tools around your woodworking shop or work shop..
  • The small rubber fitting threads on to the end of the hose and is ideal for connecting random orbital sanders, palm sanders, biscuit joiners or any other power tool with smaller dust collection ports. The small thread-on rubber fitting has a 1 inch I.D. with a 1-3/16 inch taper up to 1-1/4 inch O.D. This kit will also work with popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
  • The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!....
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

10 Foot Long Dust Collection Power Tool Hose Kit with 6 Threaded Fittings/Attachments for Multiple Types/Brands of Power Tools and Work Shop Vacuums

  • The smaller diameter 1-3/16" O.D. (Outside diameter) flexible dust collection power tool hose moves freely when connected to your power tools and vacuum. This gives you the ability to plug into different tools to add dust collection at a moments notice. The hose and its specialized fittings work with multiple power tools, workshop vacuums, jigs and other tools around your woodworking shop or work shop..
  • The small rubber fitting threads on to the end of the hose and is ideal for connecting random orbital sanders, palm sanders, biscuit joiners or any other power tool with smaller dust collection ports. The small thread-on rubber fitting has a 1 inch I.D. with a 1-3/16 inch taper up to 1-1/4 inch O.D. This kit will also work with popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
  • The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!....
Check Stock

Makita 565056-5 Power Supply Cord

  • ...and external connections for dust collection.
  • The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting.
  • Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, and bayonet fittings with ¾”, 1”, 1-1/4”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool.
  • Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric.
  • The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2 ½" vacuum connection.
Check Stock

Mudder 3 Pieces 2-in-1 Drip Irrigation Hole Punch Tool Drip Tube Hole Punch Fitting Insertion Tools for 1/4 Inch Fitting Emitter Insertion Drip Sprinkler Systems

  • What you get: you will receive 3 pieces of drip irrigation tubing hole punches in total, come with bright blue colors, sufficient quantity for your daily using.
  • Durable to use: the drip tube hole punch is mainly made of quality plastic material with material which is not easy to get corroded, sturdy and long lasting use, will bring you a nice using experience.
  • 2-In-1 punch and fitting insert: our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use, it can help to punch the proper hole for easier operation.
  • About size: the punch hole measures approx. 3 mm/ 0.118 Inches, proper size can make sure that the pressure in the drip system is suitable and won't waste your materials.
  • Please confirm whether it meets your needs before buying.
  • How to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole, very convenient and easy to use.
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • [Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
  • [Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
  • [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
  • [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....
Check Stock