Best Fixed Optical Attenuator

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (40DB)

• Useful in a wide variety of applications including impedance matching and level control..
• With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
• Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
• Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (20DB)

• Useful in a wide variety of applications including impedance matching and level control..
• With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
• Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
• Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (30DB)

• Useful in a wide variety of applications including impedance matching and level control..
• With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
• Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
• Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..

5 Pcs Fiber Optic attenuator, Fiber Signal Attenuation Converter Inserts Connector (FC-APC, 20dB)

• 【Connector Type】 20dB attenuation amount, FC-APC Female to FC-APC male attenuator, adopting high performance attenuated fiber.
• 【Operation Wavelength】This attenuator is suitable for both 1310nm and 1550 nm single mode fiber connection.
• 【High Attenuation Precision】 Attenuation precision: ±10%, when connector attenuation amount003e5dB.
• 【Transmission Stability】 Reflectance: dB≥50, which ensures the optical power stay in a stable level on its original transmission wave..
• 【Easy Installation】 The simple and compact structure make it very user friendly, just need plug and play for installation.
• 【Product Application】 Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation etc..

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (Only 1 Pcs of 3DB)

• Useful in a wide variety of applications including impedance matching and level control..
• With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
• Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
• Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..

LC/UPC Fiber Optic Attenuator 5dB, in-Line Attenuator, Male/Female, Single-mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB, 10 Pack

• Connector/Connection Polish: LC/UPC Male to LC/UPC Female, 10 Pack.
• Low Insert-loss & High Return-loss: Optical fibers are connected by adapters through internal open sleeves. Provide LC adapters to ensure the connection between fiber patch cable..
• Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
• Feature: Light weight, small volume, high accuracy, good stability and convenient operation..

XLBH Optical Fiber Accessories 5PCS/Bag FC UPC Female to Male 15dB Fiber Optic Attenuator FC UPC 15db Female Male Fiber Optic Attenuator Adapter Connector

• FAST CONNECTION: Quick assembly SC connector can provide quick and easy termination of fibers in the field.
• EXCELLENT PERFORMANCE: fiber optic adapter has good repeatability, stable performance, high success rate and high reliability.
• AUXILIARY EQUIPMENT: The attenuator can effectively suppress loop noise, eliminate interference, and prevent accidental damage to the main control terminal.
• WIDE APPLICATION: optic fiber quick connectors can be widely Used for fiber optical communication system,optical distribution frame (ODF), FTTH, CATV, etc.
• CERAMIC FERRULE: optic fiber connector built in ceramic ferrule, low insertion loss, wear resistance and long service life.

Fairfield Circuitry The Accountant

• No integrated circuits in the signal path Transformer-balanced input and output Selectable output transformer loading resistors by an internal T4-style electro-optical attenuator Very simple to operate with only two main controls, Gain and Peak Reduction A big meter shows gain reduction or output level at two different reference levels Hardwire bypass switch for easy comparisons XLR and TRS input and output jacks for flexible connections Link jack and switch for conne.
• The COMP-3A is a single-channel vintage-style Compressor/Leveler.
• The signal path uses only discrete components like resistors, capacitors and transistors, and the input and output is transformer balanced using two different transformers, each one optimized for its purpose.
• This is the way audio components were built before integrated circuits became available.
• Integrated circuits are small and cheap and widely used in most modern designs.

Passive Attenuator, 1.053M Input Res HT201 Converter Passive Attenuator 20:1 Passive Oscilloscope Signal Attenuator for Inductive Signal Primary Ignition, Automotive Diagnostics Use

• 20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
• PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
• MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
• PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
• AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.

MST VC Low Pass Filter Eurorack Module

MDS-200A Amp 1600V Three-Phase Diode Module Bridge Rectifier Power Module Provide for Single Phase Rectification

• Measuring power range -75 ~ +16 dBm (external RF attenuator can be extended to 100dBm).

USDR/USDX HF QRP SDR Transceiver SSB/CW Transceiver 8-Band 5W Ham Radio & Handhel Mic

• 【IRF Tube】Using IRF series transmitting tube to ensure its being durable & can be used to connect to an antenna (instrument base)..
• 【Lightweight&Cost-saving】The original QCX circuit is greatly simplified, and the installed components are reduced by 50 percent to save you the trouble of complicated transformer windings and wiring procedures..
• 【Less Power Consumption】Thanks to the EER transmitter E-level, it boasts high power efficiency and no bulky heat sink is required..
• 【DSP Function】Automatic gain control (AGC), noise reduction (NR), voice trigger, voice trigger Xmit (VOX), RX attenuator attenuator (ATT), TX noise gate, TX driver control, volume control, dBm/S-meter..
• 【Quality Material Handling】Laser marking aluminum laser, aluminum knobs with translucent silicone buttons..

HMC472 Digital RF Attenuator Module DC-3.8GHz Parallel 0.5dB Step 31.5dB Attenuation Value

• Attenuation Factor and Step Size :The HMC472 is a wideband 6-bit digital attenuator with an attenuation range of 0 to 31.5 dB and a typical step error of ± 0.25 dB..
• Operating Frequency Range :Adopt QFN surface mount package, uses single power supply 5V, working frequency range from DC to 3.8 GHz..
• Insertion Loss :Insertion loss is less than 2.0 dB (typical) and IIP3 is +54 dBm..
• Objects Used :Suitable for a variety of RF and IF applications..
• Attenuation Control Interface :Manually adjust the control through the 6-position pin header on the board..