Categories

Best Fixed Scope Mount

*RWS 2300596 Lock Down Scope Mount 1

  • The ultimate in scope mount design for today's magnum spring guns.
  • Utilizes a generous quantity of 4 mounting lug screws to ensure an extremely rigid fit.
  • Designed with 2 recoil pins to provide extreme holding power.
  • Has been tested on the fixed-barrel side cocking RWS rifles with great success.
Check Stock

SVBONY SV185 Scope Rings, 1-inch Scope Rings, Fits All Dovetail 2-piece 1-inch Scope Mounts

  • 0.89 inches in height, from the center of the rifle scope tube to the bottom plane of the rail mount.
  • built-in tape inside per rings to prevent from marring the scope.
  • also prevent sliding and fixed position accurately.
  • with only 1 rail clamp screw and 1 scope clamp screw per side.
Check Stock

Sks, Aks, Ak-47 Owner's Manual

  • 【Light-weight & Metal Side Rail Mount】：RTMGOB side rail mount, made of premium aluminum alloy, CNC-machined, finished and anodized, solid and durable to mount on 47 model.
  • 【Quick Detach Side Scope Mount】:The side scope mount can be quick detached from side plate receiver. Desiged with a quick-detach lever and spring-loaded adjustment part. Press on the lever button lower part for quick unlocking the mount while move the lever to another side. Then press the spring-loaded part and roll out the screw to detach the scope mount, no tools needed.
  • 【Side Picatinny Rail Mount】: The side mounted rail is standard picatinny rail for mounting red dot, sights, optic scope, flashlight, and other tactical optic accessories. The side rail mount has 17 rail slots and 8 drilled holes, covenient for mounting red dot scope, and allows sight cowitness.
  • 【Easy-to-mount Side Mount】: The scope mount can be easily mounted on 47 model. Before mounting, pull the lever upward, slide onto the side plate, tighten the scope mount by pressing the spring-loaded part and rotating the screw to adjust tightness, and finally push the lever to the right to lock the mount. The mount once settled stably and tightly, would not slipping off and shaking.
Check Stock

Thorn 30mm / 1 inch Quick Release Cantilever Picatinny Scope Mount QD Lock

  • Quick release scope mount ,allow up to 2 inches of forward scope positioning.
  • QD scope mount,quick release design allow for fast mounting.
  • Quick replease scope mount ,Lightweight 6061 grade aluminum construction.
  • QD scope mount ,mounts to any flat top Picatinny rail equipped rifle.
  • Thorn cantilever scope mount ,package include 1 pair adapter.
Check Stock

Monstrum Marksman 2X Ultracompakt Micro Prism Scope | Black

  • Next generation prism scope optic with a fixed 2x magnification and a more compact prism optic design.
  • Offers similar functionality to red dot sights for rapid short range target acquisition, but uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produces less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Built atop our all-new Ultracompakt prism optic assembly – 27% shorter and 3% lighter than previous generation prism scopes.
  • 10 ounces in weight and 4 inches in length with an integrated 1.5 inch riser mount for true cowitnessing with your front sight.
Check Stock

Air Venturi 4x15 Air Rifle Scope and Lasso Mount, BB Gun Scope Attachment

  • AIR GUN SCOPE: The 4x15 Air Rifle Scope and LASSO Mount is a perfect scope attachment that helps any air gun user have better range and optics on their air rifles. Use this scope to instruct beginners, or buy it for a veteran air rifle master..
  • AIR GUN COMPATIBILITY: This high-powered Air Rifle Scope and LASSO Mount is compatible with Red Ryder, Lil Duke, and Lil Sure Shot air rifles. The scope mount attachment gives you better control and precision and more powerful shots..
  • HIGH-QUALITY MATERIALS: The 3/8-inch dovetail mount has an aluminum construction and weighs 0.37 lbs, making this a lightweight rifle scope that's easy to carry around. The included adjustable scope rings help you find the right fit on your air rifle..
  • INSTALLATION: Remove the elevation ramp from the rear sight and use a screwdriver to remove the rear stock screw. Slide the mount base forward into the top of the air gun and replace the rear stock screw. Attach the air gun scope on top of the mount..
  • AIR VENTURI: Since 2010, we've been an innovator in the airsoft guns and accessories industry. Our quality airsoft equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check Stock

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles | 0 MOA

  • Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Hiram Red Green Blue Dot Sight with Cantilever Mount for 20mm Picatinny and Weaver Rails, 1x35 3MOA Tactical Reflex Scope Hunting Rifles and More, (Black)

  • ...A scope offers not one but three reticle colors—red, green, and blue—with 3 brightness levels to help speed up your target acquisition in any lighting condition.
  • CANTILEVER SCOPE MOUNT: The 1.2 inch QD mount easily hooks onto your 20mm Picatinny or Weaver rail, giving just the right amount of clearance over your fixed front sights for optimal positioning.
  • RUGGED CONSTRUCTION: Aircraft-grade 6061 aluminum ensures light weight and durability, with its natural corrosion resistance improved by the anodized finish.
  • the tightly sealed housing keeps your scope water, fog, and shock proof.
  • and the lenses are carefully ground and fully multicoated with premium platinum to remain scratch resistant and crystal clear.
  • EASY OPERATION: Intuitive design and clear instructions guide easy adjustment of windage, elevation, and brightness.
  • the included mesh lens cover reduces reflection and glare for better concealment during hunting or games.
  • and you can enjoy immediate use with the included CR2032 lithium batteries that will power you through 220 hours of shooting fun.
  • SATISFACTION GUARANTEED: Hiram backs this firearm accessory with strong warranty and our usual friendly 24/7 customer service, ensuring that you'll enjoy its use for years to come!.
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
  • Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
  • 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
  • ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe p....
Check Stock

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles |20 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the old Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the new Post 9/2021 compatible mount..
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock