Best Flange Shafts - TopShopReview.com

Martin 9JEM Quadraflex Sleeve, Thermoplastic Rubber, Inch, 6\ OD, 3\ Length

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).

The Pop-It tool flange spreader is used for both flange spreading and equipment lifting. Simply put, it’s the most versatile tool on the market for these applications..
The Pop-It flange spreader takes the place of a hammer and wedge and can spread or lift 10,000 pounds up to 5.5 inches with 120 pounds of force at the ratchet handle..
The Pop-it Tool flange spreader can be used in a multitude of industry applications such as gasket replacement, blinding, drive shimming, and valve service..
The Pop-It Tool also works well when lifting equipment for alignment work, removing gears or impellers from shafts..
Kit includes (2) P95-525 Pop-It Tools, (2) SMP Safety Chocks, and a hardened carrying case with custom foam inserts. The Pop-it Tool replaces wedges and pry bars to protect your workers. The Pop-it Tool replaces wedges and pry bars to protect your workers. The Pop-it Tool replaces wedges and pry bars to protect your workers..

This fan spacer extends the fan 2.5 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords. Fords.

Cast iron flange block housing increases life of the bearing.
UC207-22 chrome steel bearing for efficient operations at a wide range of speeds.
Dynamic (radial) load rating of 25.7 kN and static (axial) load rating of 15.4 kN.
1-3/8" inside diameter fits conventional cylindrical shafts.

Designed to repair damaged, grooved or worn shafts.
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications.
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed.
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading.
Easy to install with removable flange and installation tool.
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft.

Designed to repair damaged, grooved or worn shafts.
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications.
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed.
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading.
Easy to install with removable flange and installation tool.
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft.

This fan spacer extends the fan 3 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords.

This fan spacer extends the fan 2 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords.

For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately).
Thermoplastic rubber for resistance to oil and higher temperatures.
Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate.
Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C).