Best Flanged Ball Bearing

(4 Pack) PGN 3/4\ x 1-3/8\ Flanged Ball Bearing - Replacement for Lawnmower, Carts & Hand Trucks Wheels, and Wheelbarrows - Chrome Steel - Lubricated

• 100% Chrome Steel for higher resistance and durability.
• Applicable for wheels on Lawn Mower, Garden Carts, Pressure Washers, Generators, Air compressors, and more..

SKF F4BM 207-TF Ball Bearing Flange Unit, 4 Bolts, Medium Duty, Set Screw Locking, Seals with Flingers, Cast Iron, 2-7/16" Bore, 5-5/8" Bolt Hole Spacing, 11840lbf Dynamic Capacity

• Cast iron flanged housing with a solid base for vibration damping and structural rigidity.
• Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads.
• Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
• Setscrew lock for a three-point contact hold on the shaft.
• Grease fitting on the housing for reapplying lubricant.

NTN ASPF205-100 Light Duty Flange Bearing, 3 Bolts, Setscrew Lock, Non-Relubricatable, Contact Seals, Pressed Steel, Inch, 1\ Bore, 2-63/64\ Bolt Hole Spacing Width, 3-3/4\ Height, 1770 Static Load Capacity, 3150 Dynamic Load Capacity

• Pressed steel flanged housing for light-duty applications with low to moderate speeds.
• Light-duty, double-sealed radial ball bearing insert with a narrow inner ring accepts moderate radial loads and light thrust or combination loads.
• Synthetic rubber lip contact seals on both sides of the bearing keep lubricant in and contaminants out.
• Setscrew lock for a three-point contact hold on the shaft.
• Extended inner ring for increased shaft support.

Sealmaster MFC-20 Medium Duty Piloted Flange Cartridge, 4 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 1-1/4\ Bore, 5\ Overall Length, 2.917\ Bolt Hole Spacing Width, 3/8\ Flange Height, ±2 Degrees Misalignment Angle

• Cast iron flanged housing with a pilot extension for accurate location and increased stability.
• Medium-duty, deep-groove ball bearing insert for applications with moderate to high radial loads and moderate thrust or combination loads.
• Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
• Setscrew lock for a three-point contact hold on the shaft.
• Grease fitting on the housing for reapplying lubricant.

Sealmaster SF-24 Standard Duty Flange Unit, 4 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 1-1/2" Bore, 5-1/8" Overall Length, 4" Bolt Hole Spacing Width, 9/16" Flange Height, ±2 Degrees Misalignment Angle

• Cast iron flanged housing with a solid base for vibration damping and structural rigidity.
• Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads.
• Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
• Setscrew lock for a three-point contact hold on the shaft.
• Grease fitting on the housing for reapplying lubricant.

Sealmaster MSF-35 Medium Duty Flange Unit, 4 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 2-3/16" Bore, 6-7/8" Overall Length, 5-5/8" Bolt Hole Spacing Width, 13/16" Flange Height, ±2 Degrees Misalignment Angle

• Cast iron flanged housing with a solid base for vibration damping and structural rigidity.
• Medium-duty, deep-groove ball bearing insert for applications with moderate to high radial loads and moderate thrust or combination loads.
• Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection.
• Setscrew lock for a three-point contact hold on the shaft.
• Grease fitting on the housing for reapplying lubricant.

Yukon Gear & Axle (CK D44) Carrier Installation Kit for Dana 44 Differential

• Yukon replacement axle bearing and seal kits are specially designed for each application and use all high quality bearings and seals.
• Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20.
• This axle bearing and seal kit services one side only.

WJB WS4250 Oil and Wheel Seal Replaces 4250

• The flanged design allows for an easier and secure installation. This ensures a longer service life for the bearing.
• Outside ridges of the seal offer a secure and proper fit within the bearing.
• Enhanced performance in a wide range of temperatures and fluid environments allows for increased reliability for wheel end performance.
• An extra dust lip Offers enhanced dirt exclusion, keeping the wheel bearing protected from contaminates that could damage/ruin it. This saves costs as it keeps the bearing from needing to be replaced.
• Machined rubber sealing Offers accuracy and consistency for a leak-proof seal, which retaining oil and grease and repelling water, preventing the bearing from rusting over..

Spicer Rear Axle Bearing and Seal Kit For 1997-2006 Jeep TJ With Dana 44

• Yukon replacement axle bearing and seal kits are specially designed for each application and use all high quality bearings and seals.
• Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20.
• This axle bearing and seal kit services one side only.

WJB WS9150S Oil and Wheel Seal Replaces 9150S

• The flanged design allows for an easier and secure installation. This ensures a longer service life for the bearing.
• Outside ridges of the seal offer a secure and proper fit within the bearing.
• Enhanced performance in a wide range of temperatures and fluid environments allows for increased reliability for wheel end performance.
• An extra dust lip Offers enhanced dirt exclusion, keeping the wheel bearing protected from contaminates that could damage/ruin it. This saves costs as it keeps the bearing from needing to be replaced.
• Machined rubber sealing Offers accuracy and consistency for a leak-proof seal, which retaining oil and grease and repelling water, preventing the bearing from rusting over..

UCF209SS Felstrom Housing and Bearing 45,00x137,00x52,20mm

Yukon Gear & Axle (SK 30214) Replacement Carrier Shim Kit for Dana Spicer 44 Differential with 30-Spline Axle

• Yukon replacement axle bearing and seal kits are specially designed for each application and use all high quality bearings and seals.
• Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20.
• This axle bearing and seal kit services one side only.

uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc Alloy Self Aligning Pillow Block Flange Bearing, Zinc (Pack of 4)

• SIZE:KFL08 8mm Bore Diameter, Pillow Block Bearing Flange.
• FEATURES:This Bearing is a self-aligning, pillow block bearing.
• MATERIAL: Zinc Alloy Flanged Base, rust-proof, durable, have long Life.
• APPLICATION:Pillow Block Bearing Flange Block Bearing is widely used in various of machinery.
• NOTE:Can be used in transportation, transmission system, feeding systems, processing system, processing machinery.