Categories

Best Flanged Bushings

The Drum That Beats Within Us

  • Bass drums include telescopic bass drum spurs and matching maple wood bass drum hoops. Toms and snare drums feature 2.3mm triple flanged hoops. All drums are fitted with Remo drum heads.
  • Mounting Hardware: Low profile GTS tom suspension system.
  • Low-profile tom and floor tom leg brackets.
  • Gretsch T-Wing nut/bolt & "Gas cap" bass drum mount plate with "G" memory lock.
  • Hoops - Snare: 2.3mm triple flanged, Toms: 2.3mm triple flanged & Bass: Maple with matching lacquer or wrap inlay.
Check Stock

JSM Bicycle Hub Flanged Axle Nut and Safety Washer Kit, 3 Size for Front and Back Bike Wheel

  • It is made of high strength steel with antirust treatment.
  • Includes 6 sets of 3-size flange nuts and safety washers(for both Metric and British System), suitable for most bicycle replacements.
  • Spec: NUT WM FRT 5/16x26 FLANGED(2 sets), NUT WM FRT 3/8x26FLANGED(2 sets), Metric NUT FLANGED M10*1(2 sets).Please refer to picture.
Check Stock

DW Performance Series 4-Piece Shell Pack with 22 Inches Bass Drum - Gold Sparkle FinishPly

  • 4-piece Maple Shell Pack with 10" and 12" Toms, 16" Floor Tom, and 22" Bass Drum - Gold Sparkle FinishPly.
  • Performance Series Bass Drum - 18 x 22 inch - Gold Sparkle FinishPly: 22" Maple Bass Drum with Maple Hoops - Gold Sparkle FinishPly.
  • Performance Series Floor Tom - 14 x 16 inch - Gold Sparkle FinishPly: 16" Maple Floor Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 9 x 12 inch - Gold Sparkle FinishPly: 12" Maple Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
  • Performance Series Mounted Tom - 8 x 10 inch - Gold Sparkle FinishPly: 10" Maple Tom with 1.6mm Triple-flanged Hoops - Gold Sparkle FinishPly.
Check Stock

Bushing Ford 2000 3000 4000 Tractors

  • Includes: 6 Pieces of Steering Shaft Bushings as pictured.If you have a loose steering wheel, you may need to use these bushing.if you have to replace your pinion gear and sector gear due to worn teeth then replace these bushings also, these bushings being worn is most likely the cause of the pinion and sector gears wearing out.
  • Steering Shaft Bushings Fits for John Deere lawn mower D100, D105, D110, D120, D130, D140, D150, D160..
  • Steering Shaft Bushings Fits for John Deere lawn mower L100, L102, L105, L108, L110, L111, L115, L118, L120, L125, L130, L135, L145 102, 105, 115, 125, 135, 145, 155C, 190C.
  • Steering Shaft Bushings Fits for John Deere lawn mower 90C X105, X110, X115, X120, X125, X135, X140, X145, X155R, X165.
  • Specification: Steering Shaft Bushings Replace for John deere OE Part Number GX21994.
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (96A Red)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

15 Amp Flanged Inlet, TOVEN 125V RV Shore Power Inlet NEMA 5-15 Plug RV Receptacle with Waterproof Integrated 18\ Extension Cord & Cover Marine Electrical Inlet ETL Approved

  • 【15 Amp Flanged Inlet】: The flanged inlet material is premium copper and black nylon plastic. None oxidation for the copper pole on the plug. It can avoid ultraviolet degradation and Rain erosion. It is very sturdy and durable, which can work perfectly both indoor and outdoor.
  • 【Weatherproof Design】: Our 15 amp inlet is ETL approved, which means it is the safest quality. The newest weatherproof design back cover will protect it from rainstorms, snow, dust and even works well without crack and leak in the coldest winters..
  • 【Widely Compatible】: This shore power inlet Is a generator or battery charger plug to energize your several electrical devices and electrical appliances at the same time. Widely used in the RV, trailer, camper, car, boat, marine, block heater, home, recessed outlet box, etc.
  • 【Easy Installation】: The flanged power inlet needs 1-3 / 4" hole size, use 4 stainless steel screws (package Include) to firmly fix the straight blade flange entrance on the wall. The male receptacle was equipped with 14AWG 18 inch extension cable. Just need to plug in to connect the power..
  • 【The Wire Up As You Wish】: Choose the length and diameter of the cord based on your need. The Flanged electrical inlet receptacle accommodates 12-18 AWG gauge....
Check Stock

Morris 22328 Snap Bushings, 1.50-Inch, Black, Pack of 10

  • Electrical Bushings Snap Bushings - Snap Bushings for Metal Panels keep wires safe..
  • Snap bushings Eliminate Sharp Edges and insulate your sharp-edged holes in metal panels.
  • Easily Locks into Hole firmly with fingertip pressure.
  • Snap Bushings Protect Electrical Cables, ropes, utility lines passing through metal chassis.
Check Stock

Orangatang Nipples Soft Longboard Skateboard Truck Bushings (Orange, Set of 4)

  • LIVELY LONGBOARD BUSHINGS – The Orangatang Nipples are big and lively bushings designed to help you bounce out of every carve with tons of energy and rebound..
  • LARGE BARREL SHAPE – Slightly wider and taller than most stock truck bushings, the Nipples provide your trucks with more support and more material to squish, making for a highly responsive ride..
  • RANDY THANE – The ideal urethane formula for energetic, high-rebound bushings. Make your trucks come alive!.
  • THE PERFECT SET – Each pack contains two taller bottom bushings (0.66"), two shorter top bushings (0.56"), and four thin and strong flat washers..
  • SOFT – Great for tight turns and maximum response..
Check Stock

Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (96A Red)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

WELLUCK 15 Amp Flanged Inlet 125V, NEMA 5-15 RV Shore Power Inlet Plug w/Waterproof and Back Cover, 2 Pole 3-Wire AC Port Plug, Generator Male Receptacle for Marine Boat RV Shed Electrical Extension

  • 【15 Amp Flanged Inlet】: No oxidation for the Nickel coated copper pole on the plug, made of premium copper and Nylon plastic to avoid the damage of UV degradation and chemicals, rugged and durable for indoor and outdoor..
  • 【Easy Reliable Installation】: 2" Hole size required, clear see-thru wiring block (Black-Hot, Green-Ground, Silver-Neutral), and 4 long Stainless Steel screws will fix straight blade flanged inlet on the hole or wall more tightly. No gap on the edge!.
  • 【 Weatherproof Cover】: ETL approved, and the flanged power inlet cap and back cover will protect it from the rain storm, snows, dust and even works well in Western Colorado winters, without crack and leak..
  • 【Wire Up As You Wish】 : Define the Length and Diameter of the cord based on actual need. Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires, suitable for No. 12-3 through No. 18-3 cords grip..
  • 【Widely Compatible】: As a generator or battery charger plug to energize your electrical devices. Widely used in trailer, camper, RV, car, boat, marine, block heater,home, bumper, recessed outlet box, etc.
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks 98A Black

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit....
Check Stock