Marinco 5278 15 Amp 125 Volt 2 Pole-3 Wire Straight Blade Flanged Inlet
- Eliminates assembly screws from the front of inlets and outlets, creating a cleaner design.
- Tempered brass, lug style, Perma-Lock design with terminals visible through clear end cap.
- Mounted in a flanged nylon housing that allows mounting in a panel without access from the rear.
Check StockRIDGID - 41608 RIDGID PTEC 30000 Tubular Tailpiece Extension Cutter, 1-1/4\
- Executes clean, fast and straight cuts on polyethylene (PE), polypropylene (PP), and thin-wall PVC tubes.
- This cutter automatically deburrs in parallel to the cutting action so there's no need for a second tool to deburr.
- Automatic beveling allows for immediate, easy joining to other sink drain pieces.
- The open bore design allows cutting of double-flanged plastic drain pipe.
- Tubing cutter has a 1-1/4-inch single-flanged or 1-1/2-inch double-flanged outer diameter capacity.
Check StockThe Drum That Beats Within Us
- Bass drums include telescopic bass drum spurs and matching maple wood bass drum hoops. Toms and snare drums feature 2.3mm triple flanged hoops. All drums are fitted with Remo drum heads.
- Mounting Hardware: Low profile GTS tom suspension system.
- Low-profile tom and floor tom leg brackets.
- Gretsch T-Wing nut/bolt & "Gas cap" bass drum mount plate with "G" memory lock.
- Hoops - Snare: 2.3mm triple flanged, Toms: 2.3mm triple flanged & Bass: Maple with matching lacquer or wrap inlay.
Check StockDASBET 17PCS Auto Bearing Race Seal Driver Disc Tool Master Set Wheel Axle Bushing
- 【Direct use of】：Pneumatic bushing driver set removes and installs truck and trailer 1-3/8" anchor pin bushings and stuck anchor pins. Includes an 11-1/2" long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Use flanged end to install and tapered end to remove. Also removes truck leaf spring bushings..
- 【High quality】 : The use of high quality reinforced materials, wear and corrosion resistance, long service life, so that it has a longer peak work rate, I believe it can make your work more relaxed.
- [Scope of application] : Truck bushing removal, which also includes removing pins and inserting bushings.
- 【Buy With Confidence】: Lifetime warranty service, once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems.
Check StockJSM Bicycle Hub Flanged Axle Nut and Safety Washer Kit, 3 Size for Front and Back Bike Wheel
- It is made of high strength steel with antirust treatment.
- Includes 6 sets of 3-size flange nuts and safety washers(for both Metric and British System), suitable for most bicycle replacements.
- Spec: NUT WM FRT 5/16x26 FLANGED(2 sets), NUT WM FRT 3/8x26FLANGED(2 sets), Metric NUT FLANGED M10*1(2 sets).Please refer to picture.
Check StockWJB WS4250 Oil and Wheel Seal Replaces 4250
- The flanged design allows for an easier and secure installation. This ensures a longer service life for the bearing.
- Outside ridges of the seal offer a secure and proper fit within the bearing.
- Enhanced performance in a wide range of temperatures and fluid environments allows for increased reliability for wheel end performance.
- An extra dust lip Offers enhanced dirt exclusion, keeping the wheel bearing protected from contaminates that could damage/ruin it. This saves costs as it keeps the bearing from needing to be replaced.
- Machined rubber sealing Offers accuracy and consistency for a leak-proof seal, which retaining oil and grease and repelling water, preventing the bearing from rusting over..
Check StockDW Performance Series 4-Piece Shell Pack with 22 Inches Bass Drum - Gold Sparkle FinishPly
- 4-piece Maple Shell Pack with 10" and 12" Toms, 16" Floor Tom, and 22" Bass Drum - Gold Sparkle FinishPly.
- Performance Series Bass Drum - 18 x 22 inch - Gold Sparkle FinishPly: 22" Maple Bass Drum with Maple Hoops - Gold Sparkle FinishPly.
- Performance Series Floor Tom - 14 x 16 inch - Gold Sparkle FinishPly: 16" Maple Floor Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
- Performance Series Mounted Tom - 9 x 12 inch - Gold Sparkle FinishPly: 12" Maple Tom with 2.3mm Triple-flanged Hoops - Gold Sparkle FinishPly.
- Performance Series Mounted Tom - 8 x 10 inch - Gold Sparkle FinishPly: 10" Maple Tom with 1.6mm Triple-flanged Hoops - Gold Sparkle FinishPly.
Check StockWJB WS9150S Oil and Wheel Seal Replaces 9150S
- The flanged design allows for an easier and secure installation. This ensures a longer service life for the bearing.
- Outside ridges of the seal offer a secure and proper fit within the bearing.
- Enhanced performance in a wide range of temperatures and fluid environments allows for increased reliability for wheel end performance.
- An extra dust lip Offers enhanced dirt exclusion, keeping the wheel bearing protected from contaminates that could damage/ruin it. This saves costs as it keeps the bearing from needing to be replaced.
- Machined rubber sealing Offers accuracy and consistency for a leak-proof seal, which retaining oil and grease and repelling water, preventing the bearing from rusting over..
Check StockMJR Tumblers 12 LB Rock Tumbler Awarded Best High End, Most Versatile Run 5 Dif Barrel Combinations
- Award winning BEST HIGH END TUMBLER for 2019. MOST VERSATILE on the market with 5 different barrel combinations possible!.
- Heavy duty 16 gauge welded steel frame, powder coated to be scratch and corrosion resistant. Rubber coated 3/8" diameter steel rollers.
- Industrial duty flanged STAINLESS STEEL BALL BEARINGS (no plastic sleeve bearings to wear out).
- Heavy duty motor with automatic thermo overload protection - intended for continuous use.
- Commercial grade barrel that seals to be water and air tight, tapered neck for easy loading and unloading.
Check StockMOSNAI Golf Cart Front End King Pin Repair Kit for Club Car DS 1981-Up Gas/Electric Golf Cart OEM# 1016386/1010150/1016389/8067/7048（Pack of 2）
- ✅【Fit Models】The front end king pin repair kit for Club Car DS 1981-up G&E Golf Cart, fit Delta A plate + nut..
- ✅【Replace OEM Part】Brand new king pin assembly 1016386, Upper Spindle Bushings 8067, Lower Bushing Flanged 7048, Thrust Bearing Washer 1010150, Kin Pin Wave Washers 1016389..
- ✅【Function】This king pin repair kit will do your whole cart, for both the driver and passenger sides.Perfect fit, directly replaces worn out original king pins, could improve the front end performance a lot..
- ✅【High Quality】 Well made, meets OEM specifications, please carefully check the year, model and serial number of your golf cart before purchasing..
- ✅【Package Content】 2 x DS King Pin Assembly, 2x Upper Spindle Bushings, 2x Lower Spindle Bushings, 2x Thrust Bearing Washer, 2x Kin Pin Wave Washers,2 x Hex Locking Nut..
Check Stock
15 Amp Flanged Inlet, TOVEN 125V RV Shore Power Inlet NEMA 5-15 Plug RV Receptacle with Waterproof Integrated 18\ Extension Cord & Cover Marine Electrical Inlet ETL Approved
- 【15 Amp Flanged Inlet】: The flanged inlet material is premium copper and black nylon plastic. None oxidation for the copper pole on the plug. It can avoid ultraviolet degradation and Rain erosion. It is very sturdy and durable, which can work perfectly both indoor and outdoor.
- 【Weatherproof Design】: Our 15 amp inlet is ETL approved, which means it is the safest quality. The newest weatherproof design back cover will protect it from rainstorms, snow, dust and even works well without crack and leak in the coldest winters..
- 【Widely Compatible】: This shore power inlet Is a generator or battery charger plug to energize your several electrical devices and electrical appliances at the same time. Widely used in the RV, trailer, camper, car, boat, marine, block heater, home, recessed outlet box, etc.
- 【Easy Installation】: The flanged power inlet needs 1-3 / 4" hole size, use 4 stainless steel screws (package Include) to firmly fix the straight blade flange entrance on the wall. The male receptacle was equipped with 14AWG 18 inch extension cable. Just need to plug in to connect the power..
- 【The Wire Up As You Wish】: Choose the length and diameter of the cord based on your need. The Flanged electrical inlet receptacle accommodates 12-18 AWG gauge....
Check StockSawtooth Command Series 5-Piece Drum Set Shell Pack White
- 22"x18" Bass Drum w/NO Tom Mounts, 12"x9" Tom Drum, 13"x10" Tom, 16"x16" Floor Tom Drum, 14"x5.5" Snare Drum.
- Select 6-ply poplar shells produce a classic warm punchy tone with live sonic lows. 1.6mm steel Triple Flanged hoops on toms, and snare. Adjustable Bass Drum riser included.
- Upgraded appointments include 9-ply Birch bass drum hoops with wrap inlays, sleek zinc ball end/steel tube shell lugs & heavy duty tom suspension shock mounts with mounting hardware.
- All kits include virgin bass drums with Telescopic Bass Drum Spurs. 7 mil textured coated batter heads on Snare and toms. 7 mil clear resonant heads on toms. 7 mil Clear batter heads on bass drum and 7 mil coated resonant batter.
Check StockSawtooth Bop Series Drums (Drum Shell Pack, Red Mirror Metallic)
- 16"x16" Bass Drum, 10"x10" Tom, 14"x14" Floor Tom, 13"x5.5" Snare Drum.
- Select 6-ply poplar shells produce a classic warm punchy tone with live sonic lows. 1.6mm steel Triple Flanged hoops on toms, and snare. Adjustable Bass Drum riser included.
- Upgraded appointments include 9-ply Birch bass drum hoops with wrap inlays, sleek zinc ball end/steel tube shell lugs & heavy duty tom suspension shock mounts with mounting hardware.
- All kits include virgin bass drums with Telescopic Bass Drum Spurs. 10 mil texture coated batter heads on Snare and toms. 10 mil clear resonant heads on toms. 10 mil clear batter heads on bass drum and 10 mil coated resonant batter.
Check Stock
