Categories

Best Flanged Socket

Swpeet 122Pcs Carbon Steel Color Zinc Plated Carbon Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket (1/4 + 5/16, Assortment Kit)

  • 【 Perfect Inserts Nut Assortment Kit 】—— Threaded inserts for wood are used for pre-embedded connectors for wood furniture. Standard hex socket head, smooth & flat, features flanged thread texture, stable structure and easy installation..
  • 【 Wide Application】—— Suitable for soft woods of pine, plywood, fiberboard, etc, work ferfectly on the furniture combination. Pieces Pack of Furniture Screws Threaded Inserts for Wood Furniture..
  • 【 High Quality Material】 —— High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design. Yellow zinc plated surface, anti-corrosion and anti-oxidation, with no burr and flanged anti-slip design, wear-resistant and very practical..
  • 【 Usage Steps 】—— Pre-drill a proper hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use our internal hex wrench to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the hole..
  • 【 What You Get】—— In this kit, You will get 220pcs screw-in nuts and wrench are organized in a durable box. Internal thread insert type: 1/4″-20 and 5/16″-18, external diameter: 10.5mm/0.41inch. 4....
Check Stock

HALO 30 Series 6 in. White Recessed Ceiling Light Fixture Trim Kit with Air-Tite Baffle and Reflector, 200

  • Self-flanged socket supporting trim with torsion spring retention.
  • Makes installation AIR-TITE regardless of housing used.
  • Trim and baffle available in a variety of finishes.
Check Stock

M6 x 10mm 12mm 16mm 20mm 25mm Flanged Button Head Socket Cap Screws 304 Stainless Steel 18-8 Bright Finish Fully Threaded 50 PCS

  • The flanged button head socket screws are 100% stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
  • The low domed head with a wider bearing surface offer a finished appearance, making them an ideal choice when a neat appearance is desired..
  • Thread Length: 10mm, 12mm, 16mm, 20mm and 25mm..
  • Package Included: M6 x 10mm (10 PCS), 12mm (10 PCS), 16mm (10 PCS), 20mm (10 PCS), 25mm (10 PCS), and all come in a quality plastic storage box..
  • Flange Button Head Socket Screws are great to have around for use in wood and wet environments..
Check Stock

3321 10 Series Bolt Assembly 1/4-20 x 0.5 Flanged Button Head Socket Cap Screw FBHSCS with Slide-in Economy T-Nut Combo 100 Pack

  • Includes 12pcs of 3342 - 1/4-20 x 0.5 inch flanged button head socket cap screw.
  • Includes 12pcs of 3382 - 1/4-20 slide-in economy t-nut.
Check Stock

Glarks 50Pcs 1/4 -20x20mm Threaded Inserts Nuts Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut with M6 Hex Wrench for Wood Furniture 1/4 -20 x 20mm

  • ♛【What You Get:】 In this set, you will get 50pcs threaded insert nuts, which Internal thread insert type is 1/4"-20, external diameter is 10.5mm/0.41inch, total length is 20mm. Along with a 6mm hex wrench to help your installation more fast and convenient..
  • ♛【High Quality:】 All the inserts nuts are made of high quality carbon steel and with yellow zinc plated on the surface, make them have high hardness, perfect wear and rust resistance, smooth surface without burr, non-slip flanged design..
  • ♛【Product Feature:】Our insert nuts are constructed with standard hex socket head, smooth and flat, features flanged thread texture, strong and durable, good for your wood furniture use..
  • ♛【Easy to Use:】 First using the bit to pre-drill a well-sized hole, which depth is 1-2mm longer than furniture screw, then use the internal hex wrench to screw in. Please attention that if the furniture wood is with high-hardness, please enlarge the screw hole..
  • ♛【Wide Application:】 These inserts nuts are strong and durable will works good for for soft woods of pine, plywood, fiberboard.
  • also great used for hard wood, such as solid wood, have a good effect in the advanced furniture combination..
Check Stock

Glarks 80Pcs 6 Size Zinc Alloy Hex Socket Threaded Insert Nuts Assortment Kit for Wood Furniture

  • 1. Product Type: High precision hex socket flanged threaded insert nuts.
  • 2. Material: Made of high quality zinc alloy, hard and durable.
  • 3. Package: This kit include 6 size of M4*10, M5*10, M6*10, M6*15, M8*20, M10*25 total 80pcs in a transprent box, can meet your different needs.
  • 4. Feature: Easy to install, simply drill the appropriately sized hole and install with hex key, tapered external threads makes it not easy to pull out caused by vibration.
  • 5. Application: Suitable for soft woods of pine, plywood, fiberboard, etc, have a good effect in the furniture combination.
Check Stock

M6-1.0 x 12mm Flanged Button Head Socket Cap Screw Bolts Allen Socket Drive Stainless Steel 304 Black Oxide Finish Quantity 25

  • Flanged button is low domed style head with a wide bearing surface that is perfect for use on applications in tight spaces..
  • Made of high quality stainless steel 304, ensures high strength, black oxide finish provides great protection from corrosions and tarnishing..
  • Package Included: 25 pcs button head socket screws..
Check Stock

Iverntech MGN12 300mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Package Includes: 22pcs 20mm corner brackets, 44pcs M5x10mm T-slot nuts, 44pcs M5x10mm flanged button head socket cap screws bolts, 50pcs flat washers and 50pcs lock washers..
  • 2020 Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion..
  • The angle bracket is used to reinforce right-angle corner joints of aluminum extrusion profiles, insert the two ends of the bracket into the groove of the profile, and tighten the screw to fix the two profiles..
  • T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel, surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • 304 stainless steel M5x10mm button head socket cap screws features anti-corrosion, rustless, high-hardnes. M5 flat washers and lock washers can be used to adjust the length..
Check Stock

Canitu 135Pcs Threaded Inserts Nuts Assortment Set, Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut with M4 M5 M6 M8 M10 for Wood Furniture with 5Pcs Hex Wrench

  • ☼ Threaded insert nuts provide a strong, permanent thread for wood and wood based sheet materials. The unique external thread ensures strong resistance against pull out and the flanged head prevents splitting of the surfaces and driving the Insert in too far..
  • ☼ High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design. Yellow zinc plated surface, anti-corrosion and anti-oxidation, with no burr and flanged anti-slip design, wear-resistant and very practical..
  • ☼ Convenient to use and carry. Pre-drill a proper hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use our internal hex wrench to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the hole..
  • ☼ Total quantity: 135 pieces of Hex Inserts Nuts & 5Pcs of matching wrenches (35pcs M4*10, 30pcs M5*10, 25pcs M6*10, 10pcs M6*15, 15pcs M8*15, 10Pcs M8*20, 5pcs M10*20). Storage in a plastic case for easy acces..
  • These inserts nuts are strong and durable will works good for for soft woods of pine, plywood, fiberboard.
  • also great used for hard wood, such as solid wood, have a good effect in the advanced furniture com....
Check Stock

8020 3330 15 Series 5/16-18 x 0.687 Inch 11/16 Inch Flanged Button Head Socket Cap Screw FBHSCS Bolts 100 Pack

  • This flanged button head socket cap screw is made out of steel with a black zinc finish..
  • The low domed head with a wider bearing surface offer a finished appearance, making them an ideal choice when a neat appearance is desired..
  • This bolt comes with a 0.66" diameter flange head and full thread length of 0.687" with a 3/16 allen hex drive. Thread size is 5/16-18..
  • Used with t-nuts to mount brackets and plates to aluminum extrusions. Quick installation and can be re-purposed over and over..
  • Perfect for your extruded rail projects!.
Check Stock

8020 3330 15 Series 5/16-18 x 0.687 Inch 11/16 Inch Flanged Button Head Socket Cap Screw FBHSCS Bolts 2500 Pack

  • This flanged button head socket cap screw is made out of steel with a black zinc finish..
  • The low domed head with a wider bearing surface offer a finished appearance, making them an ideal choice when a neat appearance is desired..
  • This bolt comes with a 0.66" diameter flange head and full thread length of 0.687" with a 3/16 allen hex drive. Thread size is 5/16-18..
  • Used with t-nuts to mount brackets and plates to aluminum extrusions. Quick installation and can be re-purposed over and over..
  • Perfect for your extruded rail projects!.
Check Stock

Glarks 216Pcs 3030 Series Aluminum Profile Connector Set Include 20Pcs 3030 Corner Bracket, 40Pcs M6 T Nuts, 4Pcs 3-Way End Corner Bracket Connector, M5 x 20 Button Head Screw Bolts and Flat Washers

  • ♛【What You Get】: Our 3030 series aluminum profile connector set include 20pcs 3030 corner bracket, 40pcs m6 t-slot nuts, 4pcs 3-way end corner bracket connector, 40pcs flanged button head socket cap screws bolts, 40pcs flat washers and 40pcs lock washers, 32pcs allen head socket set screws, total 216pcs are well packed avoid mess..
  • ♛【Durable Quality】: The corner brackets are made of aluminum, the socket cap screws and nuts washers are made of high quality 304 stainless steel, anti-rust and corrosion resistance, can be applied for a long time, you won't worried broken after installed..
  • ♛【Easy to Use】: Our angle bracket is mainly uesd to reinforce right-angle corner joints of aluminum extrusion profiles, easy to use no tool needed. Insert the two ends of the bracket into the groove of the profile, put on the flat washer and lock washer, and tighten the screw to fix the two profiles..
  • ♛【3030 Series】: Our corner bracket set is fit for 3030 series aluninum extrusion, can be used DIY 3D printers, CNC routers, CNC laser cutters, robotics projects and so on..
  • ♛【Wide Application】: Our complete corner bracket kit are matched well with each other, can be widely used in home, office and factory area, like the connection of cabinets, tab....
Check Stock

Glarks 95Pcs Zinc Alloy Hex Flanged Screw-in Nut Hex Socket Drive Threaded Insert Nuts Assortment Set for Wood Furniture

  • ♛ Product Type: High precision hex socket flanged threaded insert nuts assortment kit.
  • ♛ Material: Made of high quality zinc alloy, hard and durable.
  • ♛ Package: This kit include 7 size of M6*10, M6*15, M6*25, M8*15, M8*20, M8*25, M10*25 total 95pcs in a transprent box, can meet your different needs.
  • ♛ Feature: Easy to install, simply drill the appropriately sized hole and install with hex key, tapered external threads makes it not easy to pull out caused by vibration.
  • ♛ Application: Suitable for soft woods of pine, plywood, fiberboard, etc, have a good effect in the furniture combination.
Check Stock