Categories

Best Flare Install Tool

OTC 6502 Master Brake Flaring Tool Kit

  • Covers single double and bubble type flares.
  • Single flare standard lines 3/16 inch – 5/8 inch and single flare metric lines 4 millimeters – 14 millimeters.
  • Double flare standard lines 3/16 inch – 1/2 inch and double flare metric lines 4 millimeters – 10 millimeters.
  • Bubble flare standard lines 3/16 inch – 1/2 inch and bubble flare metric lines 4.75 millimeters – 10 millimeters.
  • Kit contains flaring bar, arbor press, adapters, tube cutter, and debarring tool – all in a hard case.
Check Stock

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

Cal-Van Tools 166 Hydraulic in Line Flaring Tool 1 Pack,One Size

  • Combines features of inline flaring tool and a Hydraulic Flare tool to make a lightweight, low profile, easy to use tool.
  • Creates single, double and bubble Flares.
  • Fits into tight access areas allowing on car use.
  • Flare tubing sizes: SAE: 3/16", 1/4", 5/16", 3/8" metric: 4.75mm, 6mm, 8mm.
Check Stock

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

  • [Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
  • [Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
  • [Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
  • [Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
  • [Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..
Check Stock

CPS FT800FN R410A Imperial Clutch-Type Ecentric Flaring Tool with Ratchet, Black

  • CPS FT800FN R410A Imperial Clutch-Type Ecentric Flaring Tool with Ratchet.
  • WHAT IT DOES: Engineered to create stronger flare joints for high pressure R-410A systems.
  • CLEAN FLARE WALLS: Unique clutch driven feed screw and faceted cone produce uniform, clean flare walls without thin spots or galling.
  • TORQUE: This tool provides an exact amount of flaring torque with break away clutch system.
  • INCLUDED: A rugged polyethylene storage case is included.
Check Stock

Titan 51535 3/16-Inch Double Flaring Tool

  • Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant.
  • Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing..
  • Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle..
  • Handle can be removed if you prefer to use in a bench vise..
  • SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles..
Check Stock

Crankshaft Rear Main Seal and Wear Ring Installer Tool Replacement for Engine 4.5L 6.0L 6.4L Diesel Alt 303-770

  • Replacement for 4.5L Diesel - Low Cab Forward (2006-2009).
  • 6.0L Diesel - F650/750 Super Duty (2005-2007).
  • 6.4L Diesel - F250/350/450/550 Super Duty (2004-2010 & VT365 International).Installation instructions are not included.
  • OEM Replacement part # 303-770. ZTSE4515C ZTSE4515. Universal, used to install the Crankshaft Rear Seal Wear Ring for 4.5L, 6.0L, 6.4L Powerstroke and work in an easier way to save your time and money.
  • Material: All components made of high quality carbon steel, impact resiatant, excellent solid and durable.
  • Universal fits for installation of Crankshaft Rear Seal Wear Ring for 4.5L,6.0L,6.4L Powerstroke .This tool is needed to prevent your seal from leaking.Designed to eliminate lip flare on the wear sleeve and install the crankshaft rear seal wear ring on 4.5L, 6.0L & 6.4L powerstroke engine properly.
  • This rear main seal installer tool can help you install the crankshaft wear ring, rear seal and rear seal carrier effortlessly. The wear ring is automatically installed to the proper depth.
Check Stock

Roastove 5 Feet Propane Regulator and Hose,Universal Grill Regulator Replacement Parts, QCC1 Hose and Regulator for Most LP Gas Grill, Heater and Fire Pit Table,3/8' Female Flare Nut

  • 【MULTIPURPOSE】Perfect for gas grills,heaters, cookers, camp stoves, tabletop grills,laterns and more low pressure gas propane appliances..
  • 【CONNECTOR TYPE】Type-1 (QCC-1) tank connect+3/8" female flare swivel nut which has an outside diameter of 5/8" to accommodate for the flare seat..
  • 【STURDY CONSTRUCTION】Solid brass construction ,5 feet durable rubber hose..
  • 【SAFE】Air-tight connection between grill and tank, no gas leaks, air flow will be kept stable..
  • 【EASY TO INSTALL】No tools required, tool-less attachment to tank. .
Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Flaring Tool Set Brake Repair Brake Flaring Tools for 1/4 -3/8 Brake Flare Tool with Tube Cutter and Deburrer Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with φ 1/4", 5/16", 3/8" expanding dies and adapters, including 45° flaring cone,....
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with....
  • Pipe Cutting & Deburring: The flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging....
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a....
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper and stainless steel piping. It is an excellent tool for repairs on....
Check Stock

SATA 3-Piece Full-Polish Metric Flare Nut Line Wrench Set for Removing or Replacing Nuts on Fuel, Brake or Air Conditioning Lines - ST09033U

  • [VERSATILE SET] Professional tool set grips six common sizes of flare nut– 9X10mm.
  • [SECURE GRIP] Flare nut wrench design grips five sides of fasteners on lines, providing less slippage and rounding than a traditional crowfoot.
  • [FULL-POLISH FINISH] Chrome, full-polish finish wipes clean easily and resists rust or corrosion.
  • [ALLOY STEEL] One-piece alloy steel tool construction maximizes durability for rugged performance.
  • [MECHANIC’S TOOL] The perfect tool for mechanics, auto repair technicians, or other industrial tradesmen who work on lines.
Check Stock

SATA 3-Piece Full-Polish SAE Flare Nut Line Wrench Set for Removing or Replacing Nuts on Fuel, Brake or Air Conditioning Lines - ST09032U

  • [VERSATILE SET] Professional tool set grips six common standard sizes of flare nut with 3/8x7/16, 1/2x9/16 and 5/8x11/16-inch tools.
  • [SECURE GRIP] Flare nut wrench design grips five sides of fasteners on lines, providing less slippage and rounding than a traditional crowfoot.
  • [FULL-POLISH FINISH] Chrome, full-polish finish wipes clean easily and resists rust or corrosion.
  • [ALLOY STEEL] One-piece alloy steel tool construction maximizes durability for rugged performance.
  • [MECHANIC’S TOOL] The perfect tool for mechanics, auto repair technicians, or other industrial tradesmen who work on lines.
Check Stock

Robinair RAVG-1 Digital Micron Vacuum Gauge

  • Robinair's Digital Micron Vacuum gauge is a cutting edge tool with an industry first multi-color backlight that functions as an instant go/no go indicator of acceptable vacuum or leakage.
  • Patent Pending design employs a sophisticated MEMS Pirani sensor providing extreme accuracy at low micron levels and rapid response to changes in vacuum - range is from atmosphere down to 10 microns.
  • Large, easy to read 5 digit display shows vacuum readings in 6 different scales - Microns, mmHg, inHg, mBar, Pascals, or Torr.
  • Gauge features a features an impact and water resistant case with protective rubber boot, integrated 'magnetic' hook, and an auto shut-off feature that prolongs battery life.
  • Includes a protective carrying case and 1/4 inch male flare X 1/4 inch male flare and 1/4 inch female flare X 1/4 inch male flare connectors/adapters.
Check Stock