Categories

Best Flash Adapter Holder

Universal 3-in-1 Tri-Hot Shoe Mount Flash Bracket Holder with 2 Umbrella Hole for Light Stand Camera Tripod Reflective Umbrella Studio Flash Soft Box Speedlite Diffuser

  • 1. The flash bracket is made of metal material, surface antioxidant treatment.
  • hot shoe mount is made of aluminium alloy, stainless steel spring, very solid.
  • 2. Three hot shoes can be adjusted independently within the rang of 15.5mm to 18.5mm, compatible with standard cold foot flashes of Canon, Nikon, Pentax, Ricoh, Olympus, Panasonic and so on.
  • 3. The flash holder can be removed from the tri-hot shoe mount.
  • the top of the holder with 1/4" screw hole which can be connected with 1/4"screw and extended to other use.
  • the flash holder uses gear meshing, can tilt from left to right within 180°.
  • locked by screw, easy to use together with spanner.
  • 4. The tri-hot shoe mount has a built-in lateral umbrella hole locked by push bar and reed, suitable for umbrella shaft of diameter less than 10mm.
  • 5. The umbrella holder has a vertical umbrella hole, suitable for umbrella shaft of diameter less than 10mm.
  • with a 18mm hole in the bottom, if used with 1/4" to 3/8" adapter screw, can be used with all kinds of light stands and tripods, including light stands with 15.8mm diameter head, and tripods or monopods with 1/4" or 3/8" screw head..
Check Stock

2Pack Updated Flash Bracket Flash Stand Light Stand Bracket Mount with Umbrella Holder Mount Swivel for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Speedlite Studio Light LED Light

  • 2Pack of Flash Bracket for Most Flash Speedlite- This flash bracket combines a universal E Type Flash cold shoe bracket (updated), Swivel light stand....
  • Your Expensive Flash will not Fall - Updated Universal Cold Shoe Bracket on top, the cold shoe will catch the flash shoe base firmly without dropping....
  • Umbrella Holder Mount- This flash bracket is with a hole with locking screw in middle specially designed for holding umbrella..
  • Light Stand Bracket Mount- Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20....
  • Easy Adjustment- This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different....
Check Stock

Anwenk Phone Holder Hot Shoe Mount Adapter with Cold Shoe Mount for Microphone/Flash Light Compatible with Gopro Hero DJI Osmo Action Camera Smartphone, Attach on DSLR Camera/Ring Light/Tripod

  • Universal Phone Holder with Cold Shoe Mount on Top + Gopro Adapter and screw + Hot Shoe Mount. This phone holder kit can build various configuration by installing mobile phone/action camera on your dslr camera/ ring light/tripod, and adding a microphone or light on top for better shoots..
  • 【Adjustable Phone Holder with Cold Shoe on Top】- Universal phone clamp compatible with most smartphone within 2.4-3.3 inches (6-8.5 centimeter) such as iPhone 12 11 pro max x xr, Samsung. Enable to attach a microphone or small flash light on top for better shooting..
  • 【Gopro Adapter &Tiltable Screw】- This gopro mount adapter enables horizontal and vertical based angle rotation. You can easily rotate the phone kit/ Gopro Hero 9 8 7 6 5/ DJI OSMO/Action Camera to desired angles by twisting the fixing knob and tiltable screw without using any tools..
  • 【Removable Hot Shoe Mount】- Bottom hot shoe adapter allows your to attach the whole phone kit to a dslr camera or ring light. It can be removed to attach the phone kit to a tripod via its 1/4” bottom screw..
  • This cell phone holder shoe mount is a smart mounting sulotion for recording with your camera/ phone/ gopro hero action camera at the same time..
Check Stock

Zeetain 8\/20cm Dual Speedlite Camera Mount Tripod Bracket Flash Extension Bar,8\ Dual Tripod Bracket for Camera,LED Video Light,DSLR Camera,Flash Light

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Package includes 2 pcs of Flash Light Stand Bracket.
Check Stock

ChargerCity 360º Swivel DSLR Hot Shoe Flash Camera Mount for Apple ipad Mini Samsung Galaxy Tab Dell Venue 6 7 8 inch Tablet *Use Both DSLR Camera & Selfie Record See Yourself simultaneously*

  • Brand New in No Fuzz No Mess Package includes ChargerCity Custom Fit iPad mini cradle holder & 8" Adjustable Bendable Tripod Adapter.
  • Easy to install SLR Camera Flash Hot Shoe Mount w/1/4-20 connection for Apple iPad Mini (Retina) Samsung Galaxy Tab 2 3 4 5 Dell Venue Pro Toshiba Encore Lenovo IdeaTab Asus Memo Pad 6 7 8 Tablet.
  • Universal Hot shoe Adapter Compatible with any existing camera with aviliable flash hot shoe slot or Tripod with 1/4-20 connection.
  • 1/4-20 Bendable adapter can function as stand alone as adjustable tripod extension.
  • ChargerCity Manufacture Direct Replacement Warranty (No Need to contact 3rd party, Manufacture will warranty your product directly).
Check Stock

Camera Speedlite Mount Stand Flash Stand Bracket Umbrella Mount Holder Shoe Mount Compatible with Nikon Pentax Olympus Nissin Metz and Other Speedlite Flashes E Type-2 Pack

  • 【CAMERA FLASH SPEEDLITE MOUNT】It can be applied to various flash,Compatible with Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash).
  • 【FLEXIBLE POSITIONING】These flash mounts allow 180° vertical and 360° horizontal adjustment to position the umbrella and flash light in different angle.
  • 【1/4" SOCKET AND 3/8" METAL HOTSHOE】1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread.
  • 【CAMERA UMBRELLA HOLDER】There is a hole in this item so that you can insert a lighting umbrella and align it with the flash.
  • 【STURDAY AND STABLE】 The camera umbrella bracket is made of aluminum alloy,durable and solid..
Check Stock

Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4\-20 Male to 1/4\-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong and Solid (Update)

  • Flash hot shoe to 1/4" thread (Updated Solid Metal Connection Base), Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.Note: May Not Work for Sony Flash..
  • 1/4" brass nut in the bottom,work for light stands/ flash holders with 1/4" screw head..
  • Designed with cold foot, Standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes.
  • Comes with 1/4"-1/4" male to male screw for your varied configuration..
  • Package Includes 1x flash hot shoe mount adapter( Updated).
  • 1x 1/4"-1/4" screw. 100% Money Back..Note: Camera, flash , umbrella holder and tripod are not included..
Check Stock

2Pack Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4\-20 Male to 1/4\-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong &Solid (Update)

  • Flash hot shoe to 1/4" thread (Updated Solid Metal Connection Base), Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.Note: May Not Work for Sony Flash..
  • 1/4" brass nut in the bottom,work for light stands/ flash holders with 1/4" screw head..
  • Designed with cold foot, Standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes.
  • Comes with 1/4"-1/4" male to male screw for your varied configuration..
  • Package Includes 2x flash hot shoe mount adapter( Updated).
  • 2x 1/4"-1/4" screw. 100% Money Back..Note: Camera, flash , umbrella holder and tripod are not included..
Check Stock

Neewer Professional Universal E Type Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Holder for Canon Nikon Pentax Olympus and Other Flashes Studio Light LED Light 3 Pack

  • Flash cold mount shoe bracket, Light Stand Mount with Umbrella Holder.
  • Top cold shoe clip design fits most Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light(Note:this adapter does....
  • A hole specially designs for holding umbrellas,180° vertical and 360° horizontal adjustment.
  • Mount with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand.
  • Note: Light stand, speedlite flash and umbrella are not included.
Check Stock

Anwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system..
Check Stock

WELLMAKING U-Shape Camera Flash 180°Swivel Mount Bracket with Standard 1/4 to 3/8 inch Metal Male Screw Spigot Stud Compatible for Umbrella Softbox Reflector Holder Stand for Video Light Studio Light

  • 【CAMERA FLASH SPEEDLITE MOUNT】It can be applied to various flash,Compatible with Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash).
  • 【FLEXIBLE POSITIONING】These flash mounts allow 180° vertical and 360° horizontal adjustment to position the umbrella and flash light in different angle.
  • 【1/4" SOCKET AND 3/8" METAL HOTSHOE】1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread.
  • 【CAMERA UMBRELLA HOLDER】There is a hole in this item so that you can insert a lighting umbrella and align it with the flash.
  • 【STURDAY AND STABLE】 The camera umbrella bracket is made of aluminum alloy,durable and solid..
Check Stock

Professional 52MM Accessory Bundle Kit for Nikon D3300 D3200 D3100 D5000 D5100 D5200 D5300 D5500 D7000 D7100 D7200 & DSLR Cameras, 15 Accessories for Nikon

  • Mega Pro 34 Piece Accessory Kit Includes All Accessories necessary for capturing pictures with a Nikon D7100 DSLR Camera..
  • Includes High Definition 2X Telephoto Lens, High Definition Wide Angle Lens (both lenses are 58mm with an adapter ring of up to 62mm), an External Flash, Multi Power Battery Grip + 2 High Capacity EN-EL15 ENEL15 Batteries (2400mAh each) and a AC/DC Quick Charger with a Car Charging Adapter..
  • Includes 32GB Memory Card (2 x 16GB Memory Cards), an External Flash, a Full Size Pro grade 72 inch Tripod with 3-Way Pan-Head, Bubble level indicator, 3 Section aluminum alloy lock in legs Plus a Full Size Large Well Padded Case with Adjustable Compartment Dividers, Zippered pocket and comfortable strap..
  • Includes 3 Piece High resolution Filter Set, 2 UV Protection Filters (all filters are 58mm), A Universal Camera Remote Control, a Hard Lens Hood and a Soft Rubber Lens Hood (both 58mm) a Universal Card Reader, Memory Card Case Holder, 2 Screen Protectors, Lens Cap and Lens Cap Holder..
  • Additionally included is a Deluxe Cleaning Kit and a HeroFiber Ultra gentle cleaning cloth designed for cleaning electronics and accessories..
Check Stock

iSaddle Large Car Cup Holder Adapter Compatible with Hydro Flask 32oz 40oz 50/50 Flask, Yeti 24/30/36oz, Nalgene 32oz Coffee Mugs - Car Interior Accessory Big Bottles Car Cup Holder (Up to 3.8 Inches)

  • ✅DESIGN FOR BIG BOTTLE✅ iSaddle Big Car Cup Holder is Designed to Hold Large Cups/Bottles Up to 3.8 Inches In Diameter.
  • The Depth Of The Upper Cup Holder Is 3 Inches, Will Hold Your Flash While Driving And Making Turns..
  • ✅PRACTICAL CUP HOLDER✅ Made By Durable ABS Plastic, Unbreakable In Extreme Heat Or Cold.
  • Incorporates One Inch U-SHAPE Cut Out To Perfectly Accommodate Coffee Cups Or Travel Mugs With External Handles..
  • ✅WIDE COMPATIBILITY***✅ 2.6"-3.2" Tapered Narrow Base Fits Well for Almost All Car Cup Holder, iSaddle Cup Adapter's Narrow Base Is Detachable, So The Top Cup Holder Adapter Can Be Used Separately For More Oversized Cup Holder. - Works Great for Automotive Cupholders, Also Golf-Carts, Motorcycles, Boats, Trucks & RVs..
  • ✅FITS A LOT OF BOTTLES*✅ Fits Most of Standard Water Bottle/Drink/Beverage/Coffee/Mug, Such As Hydro Flask 32oz 40oz 50/50 Flask, Yeti 24/30/36oz, Nalgene 32oz and Other Larger Cups Bottles Beverages. Please Check the Diameter Before Placing Order.
  • ✅12 MONTHS WARRANTY✅ Purchase Now, Risk-Free, 100% MONEY BACK GUARANTEE IF ANYTHING GOES WRONG WITHIN 365 DAYS!.
Check Stock