Categories

Best Flash Tripod Mount

Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4\-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash, 2Pack

  • Updated Cold Shoe Flash Stand Adapter. Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • Updated: NO SPRING. Never have to worry about the springs falling out again. That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel.(Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount)..
  • Universal 1/4" Tripod Screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand..
  • Smart Design - With a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place..
  • Material: Metal construction with black anodized for higher durability..
Check Stock

Optical Flash Slave Trigger JJC Hot Shoe Sync Adapter with PC Socket,Optical Sensor & 1/4 -20 Threaded Socket Cold Shoe for All Flashes Speedlight with Standard ISO 518 Hot Shoe-1 Pack

  • The flash standard hot shoe on the top is perfectly fit for off-camera flash, microphone, studio light other equipment or devices with standard ISO....
  • Optical Sensor: Optical flash slave trigger for lag-free firing of a second flash unit. For shoe-mount flash units-no cord required.
  • The PC female outlet on the side, enabling you to trigger flash mounted onto the upper hot shoe and additional flash or studio light (A sync cable is....
  • The standard cold shoe on the bottom is compatible with DSLR, mirrorless digital camera, camcorder and other cameras with standard hot shoe.
  • The 1/4"-20 Tripod Socket can be mounted onto a tripod with a 1/4"-20 male screw. And the lock nut helps you mount the devices tightly.
Check Stock

Vello Speedy Camera Rotating Flash Bracket with TTL Off-Camera Flash Cord for Canon EOS Cameras (1.5') Kit

  • Universal Lengthen Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket..
  • Dual Cold Shoe Mount- 1x integrated cold shoe mount.
  • 1x length adjustable cold shoe mount. Adjustable range: 3-3.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,.
  • Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole..
  • Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.And attach the extension bar mount to dslr camera via its hot shoe base..
  • Durable and Solid & Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length:8”, Net Weight:3oz. If you have any question with your order,please feel free to contact us..
Check Stock

Anwenk Camera Flash Stand Flash Speedlight Hot Shoe Mount Stand with 1/4\ Metal Tripod Thread for Flash Speedlight Speedlite (Hot Shoe Flash Stand)

  • Universal Camera Hot Shoe Flash Stand for dslr camera,Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony)..
  • With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included)..
  • A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand..
  • Dimensions: 95 x 63 x 12mm (3.7" x 2.5" x 0.5").
  • Package includes 2pcs of camera hot shoe flash stands. Tip: If you will need it to support your flash at an angle, we suggest you can choose our metal cold shoe mount for angled position for better protection- Search"B07MZJRTH4" or "B076FTW8YG"..
Check Stock

ChromLives Hot Shoe Extension Bar Mount, Cold Shoe Extension Flash Bracket, Dual Straight Mount Flash Bracket Compatible with Nikon Canon Sony Olympus DSLR Camera Camcorder DV

  • Universal Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket..
  • Dual Cold Shoe Mount- 1x integrated cold shoe mount.
  • 1x length adjustable cold shoe mount. Adjustable range: 0~0.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,..
  • Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole..
  • Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.And attach the extension bar mount to dslr camera via its hot shoe base..
  • Durable and Solid & Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length: 4.8”, Net Weight:63g/2.22oz..
Check Stock

SUPON Super Clamp + Mini Ball Head Bracket Mount + 1/4' to 1/4' Screw and 1/4' to 3/8' Screw for Rig,Monitor,DSLR,Backdrop,Flash,LED Light,Light Stand,Bike,Motorcycle,Rod,Tripod,Action Cameras

  • SUPON Super Clamp is can fix on to any shaped body like cameras, lights, umbrellas, hooks, shelves, plate glass, bike, motorcycle, Rod, tripod, monopod, cross bars,etc. Combine with Ball Head Mount,it could attach and detach from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting..
  • Comes with a mini Ball head Mount, with 1/4 inch Screw Mount, uses to mount accessories onto a flash bracket.
  • 360-degree articulation,Ball head can be adjusted into most position, makes you a comfortable use. Perfect for DSLR Film Movie Rig, Monitor, Flash, LED Lights, Track Slider, Light Stand, Action Camera, etc..
  • 1/4" To 3/8" Screw&Nut Adapter- The detachable 1/4" to 3/8" screw socket at the bottom, which can be converted by yourself, allow the U shape flash bracket to attach to a tripod or light stand. Note: Received the flash bracket with the convert screw. Release the screw to get 1/4” thread or 3/8” thread..
  • Metal construction with black anodized for higher durability..
  • Non-slip rubbers on the inner side provides strength and stability. Maximum opening diameter: 2.16". Ideal for clamping items 0.6"-1.73" in diameter..
Check Stock

Anwenk Camera Flash Stand Flash Speedlight Hot Shoe Mount Stand with 1/4\ Metal Tripod Thread for Flash Speedlight Speedlite, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax 4 Pack

  • Universal Camera Hot Shoe Flash Stand for dslr camera, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony)..
  • With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included)..
  • A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand..
  • Dimensions: 95 x 63 x 12mm (3.7" x 2.5" x 0.5").
  • Package includes 4pcs of camera hot shoe flash stands.Tip: If you will need it to support your flash at an angle, we suggest you can choose our metal cold shoe mount for angled position for better protection- Search"B07MZJRTH4" or "B076FTW8YG"..
Check Stock

QYXINC Camera Hot Shoe Mount Adapter Flash Shoe Mount to 1/4\ Tripod Screw Adapter 2Piece, Metal Cold Shoe Flash Stand Adapter with 1/4-inch -20 Tripod Screw 2Piece

  • Flash hot shoe mount with 1/4"-20 tripod screw adapter, fit on anything else that has a 1/4"-20 thread hole(such as microphone, LED light, monitor, camcorder or digital camera)..
  • Metal cold shoe with 1/4"-20 threaded hole is suitable for the 1/4" thread tripod or light stand. Work with Canon/ Pentax/Nikon speedlite flash, trigger, monitor and any accessories that has a Universal camera shoe..
  • Easy to use. Hot shoe and Cold shoe combo pack.
  • High quality Aluminum Alloy, sturdy and durable..
  • Package Includes 2x Hot shoe mount adapter003cbr003e 2x Cold shoe mount adaper.
Check Stock

Zeetain 8\/20cm Dual Speedlite Camera Mount Tripod Bracket Flash Extension Bar,8\ Dual Tripod Bracket for Camera,LED Video Light,DSLR Camera,Flash Light

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Package includes 2 pcs of Flash Light Stand Bracket.
Check Stock

ChromLives Camera L Bracket Mount Video Grip L-Bracket with Dual Flash Cold Shoe Mount 1/4'' Tripod Screw, Heavy Duty Padded Hand Grip for DSLR Camera Camcorder (Updated)

  • This is a heavy duty photography video camera L bracket with dual flash cold shoe mounts,1/4” thread hole on top,and 1/4” tripod screw on base plate for any standard camera or camcorder.This camera L bracket allows you to attach a light source to the hot shoe, which sets the light source away from the camera. This helps reduce red eye and reduce harsh shadows..
  • REMOVABLE COLD SHOES-This L bracket is updated with two solid removable flash shoe mounts for added light source, Far exceeds the built-in shoe mount version which will risk your delicate flash/monitor to slide off. Provides an economical way to do both horizontal and vertical flash..
  • UNIVERSAL 1/4” SCREW- Updated with an extra 1/4” screw hole between the two cold shoe mount for more configuration. Comes with a 1/4”-20 thumb screw to connect your camera camcorder,action camera etc,. 1/4” threaded hole on the bottom of the thumb screw.
  • ERGONOMICS HAND GRIP- Smart padded hand grip design for easy holding. Strong construction..
  • SOLID MADE- The l shape bracket is made of high quality aluminum metal and padded grip is made of hard plastic. Heavy duty and strong..
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

Anwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system..
Check Stock

2 Pack JJC FA-SHC1M Hot Shoe Cover Cap for Sony A6000 A6100 A6300 A6400 A6500 A6600 A7 A7 II A7 III A7R IV A7R III A7R II A7R A7S A7S II A9 A99 II A77 II RX1 RX1R II RX10 IV III and More Sony Camera

  • SHOE MOUNT WITH 1/4"-20 SOCKET - Features a built-in 1/4"-20 tripod socket at the other end where the Speedlite unit is attached to which permits to be locked onto a tripod or flash shoe mount, frees your hand from holding the off-camera flash..
  • SAFETY & FLEXIBLE LENGTH - Feature a locking knob on the two ends of the TTL cable to ensure your equipment is secure. Uncoiled lenght: 50cm/1.6ft, coiled length: 11cm/4.3inch..
  • TTL CABLE WITH SHOE MOUNT & 1/4"-20 SOCKET - Features a built-in 1/4"-20 tripod socket at the other end where the Speedlite unit is attached to which permits to be locked onto a tripod or flash shoe mount, frees your hand from holding the off-camera flash..
  • COMPATIBILITY - TTL Cable Compatible with Sony Camera and speedlites with Multi Interface MI Shoe, Compatible with Sony ZV1, A7R IV, A7C, A7 III, A7R III, A7S III, A7S II, A7 II, A7R II, A7, A7R, A7S, A7SM2, A7RM2, A7M3, A7RM2, A7RM3, A9, A9 II, A99 II, A77 II, A6600, A6100, A6000, A6500, A6400, A6300, and more. Five mounting holes on the camera platform allow for almost any camera to utilize the bracket..
  • CAMERA COMPATIBILITY - Compatible with Sony Camera with Multi Interface Shoe, such as Sony Alpha 7R IV, 7RIV, a1, a7IV, a7R IV, A9, A7, A7R, A7S, A7SII, A7SIII, A7II, A7III....
Check Stock