Categories

Best Flash Umbrella Adapter

2Pack Updated Flash Bracket Flash Stand Light Stand Bracket Mount with Umbrella Holder Mount Swivel for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Speedlite Studio Light LED Light

  • 2Pack of Flash Bracket for Most Flash Speedlite- This flash bracket combines a universal E Type Flash cold shoe bracket (updated), Swivel light stand....
  • Your Expensive Flash will not Fall - Updated Universal Cold Shoe Bracket on top, the cold shoe will catch the flash shoe base firmly without dropping....
  • Umbrella Holder Mount- This flash bracket is with a hole with locking screw in middle specially designed for holding umbrella..
  • Light Stand Bracket Mount- Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20....
  • Easy Adjustment- This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different....
Check Stock

Zeetain 8\/20cm Dual Speedlite Camera Mount Tripod Bracket Flash Extension Bar,8\ Dual Tripod Bracket for Camera,LED Video Light,DSLR Camera,Flash Light

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Package includes 2 pcs of Flash Light Stand Bracket.
Check Stock

Anwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system..
Check Stock

SUPON Flash Bracket U-Shape,180° Adjustable Swivel Umbrella Softbox Holder with 1/4 to 3/8 Screw &Nut Adapter and Cold Shoe Mount for DSLR Cameras,Speedlites,Tripod,Light Stand,Studio,LED Light

  • Special Design- This flash bracket can attach on your light stand and flash light, insert your photography umbrella or Softbox and adjust your angle....
  • Umbrella/Softbox Mount Bracket- A hole with locking screw in middle specially designed for holding umbrella or softbox. Allows 180° swivel to adjust....
  • 1/4" To 3/8" Screw&Nut Adapter- The detachable 1/4" to 3/8" screw socket at the bottom, which can be converted by yourself, allow the U shape flash....
  • Cold Shoe Mount Bracket- Come with a cold shoe mount on top design fits DSLR camera flash speedlites or video LED light, studio light, monitor, ring....
  • Durable- The flash bracket is made of whole aluminum alloy,durable and solid to use..
Check Stock

TARION Camera Flash Bracket H-Type Mount Swivel Tilt Light Stand Metal Umbrella Softbox Holder Adapter 180° Adjustable for 1/4\ 3/8\ Lamp Mount Tripod

  • It fits for holding the softbox or umbrella on the light stand and allows for flashing from horizontal / vertical or at the middle and low position.
  • 180° adjustment supports any angle of flashing The flash can be fixed by the screw on the top of the adapter provide safety.
  • The detachable 1/4"-3/8" double-end nut at the bottom allows for installing your flash on the light stand or tripod freely.
  • Dimension approx 11.5x2.7 cm/ 4.5x1.1 " Diameter of umbrella hole approx 1.5 cm/ 0.6".
  • Suitable for 1/4" or 3/8" light stand tripod softbox umbrella or flash etc..
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

Universal 3-in-1 Tri-Hot Shoe Mount Flash Bracket Holder with 2 Umbrella Hole for Light Stand Camera Tripod Reflective Umbrella Studio Flash Soft Box Speedlite Diffuser

  • 1. The flash bracket is made of metal material, surface antioxidant treatment.
  • hot shoe mount is made of aluminium alloy, stainless steel spring, very solid.
  • 2. Three hot shoes can be adjusted independently within the rang of 15.5mm to 18.5mm, compatible with standard cold foot flashes of Canon, Nikon, Pentax, Ricoh, Olympus, Panasonic and so on.
  • 3. The flash holder can be removed from the tri-hot shoe mount.
  • the top of the holder with 1/4" screw hole which can be connected with 1/4"screw and extended to other use.
  • the flash holder uses gear meshing, can tilt from left to right within 180°.
  • locked by screw, easy to use together with spanner.
  • 4. The tri-hot shoe mount has a built-in lateral umbrella hole locked by push bar and reed, suitable for umbrella shaft of diameter less than 10mm.
  • 5. The umbrella holder has a vertical umbrella hole, suitable for umbrella shaft of diameter less than 10mm.
  • with a 18mm hole in the bottom, if used with 1/4" to 3/8" adapter screw, can be used with all kinds of light stands and tripods, including light stands with 15.8mm diameter head, and tripods or monopods with 1/4" or 3/8" screw head..
Check Stock

JINTU Dual Hot Shoe Flash Speedlite Bracket Stand Umbrella Holder Adapter with 1/4' 3/8' Screw Mount for Canon Nikon Yongnuo Godox Flash Speedlite Video Camera Camcorder

  • - Dual hot shoes adapter, universal for flash with standard hot shoe mount..
  • - Standard 1/4 inch screw can connect many flash lights directly, which is convenient for photographers to use the flash to make multi-directional fill light when shooting outside..
  • - Built in umbrella socket, and the angle of the flash can be adjusted 180 degrees, perfect for holding your photo umbrella..
  • - Universal cold shoe mount compatible with Canon, Nikon etc most DSLR cameras and other flashes with standard shoe mount or video LED light, studio light..
  • - Aluminium alloy made, sturdy and durable..
Check Stock

Neewer Professional Universal E Type Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Holder for Canon Nikon Pentax Olympus and Other Flashes Studio Light LED Light 3 Pack

  • Flash cold mount shoe bracket, Light Stand Mount with Umbrella Holder.
  • Top cold shoe clip design fits most Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light(Note:this adapter does....
  • A hole specially designs for holding umbrellas,180° vertical and 360° horizontal adjustment.
  • Mount with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand.
  • Note: Light stand, speedlite flash and umbrella are not included.
Check Stock

Neewer® Flash Mount Three Umbrellas Kit 33 /84cm White Soft/Silver Reflective/Gold Reflective Umbrella for Canon 430EX II,580EX II,Nikon SB600 SB800,Yongnuo YN 560,YN 565,Neewer TT560,TT680

  • The kit included:(1)33"/84cm Translucent White Soft Umbrella + (1)33"/84cm Silver Reflective Umbrella + (1)33"/84cm Gold Reflective Umbrella +....
  • 33"/84cm Translucent White Soft Umbrella: The umbrellas can deliver great skin tone and contrast control,perfect for your studio and set.
  • 33"/84cm Silver Reflective Umbrella: An umbrella that was made for the professional in mind,ideal for eliminating warmth from an object or subject.
  • 6.89 feet/210cm Light stand: Constructed from aluminum alloy, giving it exceptional strength for heavy duty work.
  • Shoemount B-Type Brackets: Designed with a universal cold shoe adapter for use with portable flash units,such as Canon or Nikon speedlights.Type B....
Check Stock

CowboyStudio Flashlight /Hot Shoe/Umbrella Holder with Swivel/Tilt Bracket for Nikon and Canon E430 E580 SB600 SB800 SB900

  • Adjust the umbrella and flash in different angle.
Check Stock

ChromLives 8'' Cold Shoe Extension Bar, Flash Straight Bracket, Camera Dual Mount Flash Bracket Compatible with Nikon Canon Sony Olympus DSLR Camera Camcorder DV

  • This tilt adapter can attach on your light stand, insert your photo umbrella and adjust your angle, insert your umbrella and adjust your mount, so it is at an optimum angle for getting great photographic results every time. It's a necessary gadget for portraits, interior and product photography..
  • Made of high quality nylon material, strong and durable..
  • It has teardrop shaped hole design and can lock your photo umbrellas..
  • Comes with a detachable 1/4 inch to 3/8 inch screw spigot, suitable for most LED lights, flash lights, and light stands..
  • 180 degree adjustment supports any angle of lighting and umbrella.
Check Stock

Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4\-20 Male to 1/4\-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong and Solid (Update)

  • Flash hot shoe to 1/4" thread (Updated Solid Metal Connection Base), Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.Note: May Not Work for Sony Flash..
  • 1/4" brass nut in the bottom,work for light stands/ flash holders with 1/4" screw head..
  • Designed with cold foot, Standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes.
  • Comes with 1/4"-1/4" male to male screw for your varied configuration..
  • Package Includes 1x flash hot shoe mount adapter( Updated).
  • 1x 1/4"-1/4" screw. 100% Money Back..Note: Camera, flash , umbrella holder and tripod are not included..
Check Stock